[Sat Oct 22 00:36:32 2011] Detection parameters:
  Position = (246.6, 649.3) = 11 31 56.64 -12 28 26.6
  Extent = 0.9" x 0.6", rotation angle = 71 degrees
  Source counts = 24.7 +/- 5.2
  Background counts = 2.3
  Rate = 0.001 +/- 0.0002

[Sat Oct 22 00:36:32 2011] Off-axis axis estimate = 3.98'
[Sat Oct 22 00:37:01 2011] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 00:37:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 00:37:01 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Sat Oct 22 00:37:01 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Sat Oct 22 00:37:01 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.82"
[Sat Oct 22 00:37:01 2011] fullrun_ccd7_acisf11543_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct 22 00:37:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11543_pi14-548_cl_pass0_src3.csv
[Sat Oct 22 00:37:01 2011] fullrun_ccd7_acisf11543_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct 22 00:37:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11543_pi14-548_cl_pass0_src3.csv
[Sat Oct 22 00:37:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11543_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11543_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 00:37:02 2011] fullrun_ccd7_acisf11543_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct 22 00:37:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11543_pi14-548_cl_pass0_tfrozen_src3.csv
[Sat Oct 22 00:37:02 2011] fullrun_ccd7_acisf11543_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct 22 00:37:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11543_pi14-548_cl_pass0_tfrozen_src3.csv
[Sat Oct 22 00:37:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11543_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11543_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 00:37:04 2011] Spatial fit model total counts = 23.202700, observed total counts = 28.000000
[Sat Oct 22 00:37:04 2011] Offset between fit and detection position for source 6 = 0.344718 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.344718 pixels
  Position = (246.9, 649.1) = 11 31 56.65 -12 28 27.0
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 25.3 +/- 5.0
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sat Oct 22 00:37:04 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 00:37:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 00:37:04 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 00:37:04 2011] Source does appear to be extended
[Sat Oct 22 00:37:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 00:37:04 2011] Deleting source due to low Poisson probability 0.9