[Sun Oct 30 20:08:44 2011] Detection parameters:
  Position = (339.2, 81.2) = 22 40 33.88 3 15 10.2
  Extent = 2.0" x 1.6", rotation angle = 12 degrees
  Source counts = 34.0 +/- 6.5
  Background counts = 8.0
  Rate = 0.001 +/- 0.0002

[Sun Oct 30 20:08:44 2011] Off-axis axis estimate = 6.61'
[Sun Oct 30 20:09:13 2011] Using EEF radius (= 1.95 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 20:09:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 20:09:13 2011] Initial guess for spatial extent in simple fitting = 1.95"
[Sun Oct 30 20:09:13 2011] source mask rpix=4.0, npix_max = 79, mask sum = 81, frac = 1.013
[Sun Oct 30 20:09:13 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.95"
[Sun Oct 30 20:09:13 2011] fullrun_ccd7_acisf11535_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 30 20:09:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11535_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 20:09:13 2011] fullrun_ccd7_acisf11535_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 30 20:09:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11535_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 20:09:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11535_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11535_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 20:09:13 2011] fullrun_ccd7_acisf11535_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 30 20:09:13 2011] fullrun_ccd7_acisf11535_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 30 20:09:13 2011] Fit fullrun_ccd7_acisf11535_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct 30 20:09:18 2011] Spatial fit model total counts = 47.954500, observed total counts = 48.000000
[Sun Oct 30 20:09:18 2011] Offset between fit and detection position for source 2 = 2.089993 pixels
[Sun Oct 30 20:09:18 2011] 47.464700 total counts/ 28.193200 bgd. counts: snr = 3.629471
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.089993 pixels
  Position = (341.0, 82.1) = 22 40 33.83 3 15 10.4
  Extent = 1.5 (0.7-2.8)", rotation angle = 0
  Source counts = 19.3 +/- 6.9
  Background counts = 28.2
  Rate = 0.0007 +/- 0.0002
[Sun Oct 30 20:09:18 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 20:09:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 20:09:18 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 20:09:18 2011] Source does appear to be extended
[Sun Oct 30 20:09:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 20:09:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 20:09:29 2011] Initial guess for spatial extent in simple fitting = 1.55"
[Sun Oct 30 20:09:29 2011] source mask rpix=3.1, npix_max = 53, mask sum = 64, frac = 1.201
[Sun Oct 30 20:09:29 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.55"
[Sun Oct 30 20:09:30 2011] fullrun_ccd7_acisf11535_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 30 20:09:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11535_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 20:09:30 2011] fullrun_ccd7_acisf11535_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 30 20:09:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11535_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 20:09:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11535_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11535_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 20:09:30 2011] fullrun_ccd7_acisf11535_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 30 20:09:30 2011] fullrun_ccd7_acisf11535_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 30 20:09:30 2011] Fit fullrun_ccd7_acisf11535_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct 30 20:09:35 2011] Spatial fit model total counts = 37.818000, observed total counts = 38.000000
[Sun Oct 30 20:09:35 2011] Offset between fit and detection position for source 2 = 0.052985 pixels
[Sun Oct 30 20:09:35 2011] 37.464100 total counts/ 18.811700 bgd. counts: snr = 4.300517
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.052985 pixels
  Position = (341.0, 82.1) = 22 40 33.84 3 15 10.4
  Extent = 1.6 (0.4-3.1)", rotation angle = 0
  Source counts = 18.7 +/- 6.1
  Background counts = 18.8
  Rate = 0.0006 +/- 0.0002
[Sun Oct 30 20:09:35 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 20:09:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 20:09:35 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 20:09:35 2011] Source does appear to be extended
[Sun Oct 30 20:09:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 20:10:30 2011] Not overwriting source region fullrun_ccd7_acisf11535_pi14-548_pass1_cl_src2_src.reg
[Sun Oct 30 20:10:30 2011] Extracting stamp from image fullrun_ccd7_acisf11535_pi14-548_cl_sm2.00.img.gz, (268, 9) - (414, 155)
[Sun Oct 30 20:10:30 2011] Writing fullrun_ccd7_acisf11535_pi14-548_pass1_cl_src2.gif
[Sun Oct 30 20:10:36 2011] ../../acisf11535/products/events/fullrun_ccd7_acisf11535_pi14-548_pass1_cl_src2_src.evt and ../../acisf11535/products/events/fullrun_ccd7_acisf11535_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Oct 30 20:10:36 2011] Size of ../../acisf11535/products/events/fullrun_ccd7_acisf11535_pi14-548_pass1_cl_src2_src.evt.gz[events] = 43 counts
[Sun Oct 30 20:10:36 2011] Mean chipx,y = (993.79, 432.60)
[Sun Oct 30 20:10:36 2011] Mean tdetx,y = (4910.79, 2134.60)
[Sun Oct 30 20:10:36 2011] chipx,y range = (974.00-1015.00, 408.00-457.00)
[Sun Oct 30 20:10:36 2011] Size of ../../acisf11535/products/events/fullrun_ccd7_acisf11535_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 71 counts
[Sun Oct 30 20:10:36 2011] ../../acisf11535/products/images/fullrun_ccd7_acisf11535_pi14-548_pass1_cl_src2_src.img and ../../acisf11535/products/images/fullrun_ccd7_acisf11535_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Oct 30 20:10:36 2011] ../../acisf11535/products/spectra/fullrun_ccd7_acisf11535_pi14-548_pass1_cl_src2_src.pi and ../../acisf11535/products/spectra/fullrun_ccd7_acisf11535_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Oct 30 20:10:36 2011] Not generating rmf since there are only 18 counts
[Sun Oct 30 20:10:39 2011] ../../acisf11535/products/lightcurves/fullrun_ccd7_acisf11535_pi14-548_pass1_cl_src2_src.lc and ../../acisf11535/products/lightcurves/fullrun_ccd7_acisf11535_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Oct 30 20:10:59 2011] 205.35
[Sun Oct 30 20:11:01 2011] Updating aperture counts using extracted products
[Sun Oct 30 20:11:01 2011] Error reading totcts from fullrun_ccd7_acisf11535_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Oct 30 20:11:01 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 20:11:01 2011] Using photon index=1.80, rate=0.000634, arf fullrun_ccd7_acisf11535_pi14-548_pass1_cl_src2.arf
[Sun Oct 30 20:11:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 20:11:01 2011] Updating source flux to 5.2e-15
[Sun Oct 30 20:11:09 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting