[Sun Oct 30 20:08:44 2011] Detection parameters:
  Position = (414.4, 252.0) = 22 40 22.86 3 24 51.1
  Extent = 0.8" x 0.6", rotation angle = 103 degrees
  Source counts = 176.5 +/- 13.4
  Background counts = 2.5
  Rate = 0.006 +/- 0.0005

[Sun Oct 30 20:08:44 2011] Off-axis axis estimate = 3.57'
[Sun Oct 30 20:09:11 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 20:09:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 20:09:11 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Sun Oct 30 20:09:11 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.061
[Sun Oct 30 20:09:11 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.71"
[Sun Oct 30 20:09:12 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 30 20:09:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11535_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 20:09:12 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 30 20:09:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11535_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 20:09:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11535_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11535_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 20:09:12 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 30 20:09:12 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 30 20:09:12 2011] Fit fullrun_ccd6_acisf11535_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 30 20:09:17 2011] Source 7 is offset by 6.205468 and 4.764062 pixels which is larger than
2 X fitted extent = 0.720874 x 0.720874, not incorporating fit results
[Sun Oct 30 20:09:17 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 20:09:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 20:09:17 2011] Assessing source extent using major
[Sun Oct 30 20:09:17 2011] Source does appear to be extended
[Sun Oct 30 20:09:17 2011] Computing asymmetry using major and minor axis, asym = 1.45
[Sun Oct 30 20:09:28 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 20:09:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 20:09:28 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Sun Oct 30 20:09:28 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.061
[Sun Oct 30 20:09:28 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.71"
[Sun Oct 30 20:09:29 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 30 20:09:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11535_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 20:09:29 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 30 20:09:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11535_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 20:09:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11535_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11535_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 20:09:29 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 30 20:09:29 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 30 20:09:29 2011] Fit fullrun_ccd6_acisf11535_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 30 20:09:34 2011] Spatial fit model total counts = 176.868000, observed total counts = 179.000000
[Sun Oct 30 20:09:34 2011] Offset between fit and detection position for source 7 = 0.663195 pixels
[Sun Oct 30 20:09:34 2011] 177.730690 total counts/ 1.529690 bgd. counts: snr = 142.464499
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.663195 pixels
  Position = (414.9, 252.5) = 22 40 22.87 3 24 51.1
  Extent = 0.9 (0.9-1.0)", rotation angle = 0
  Source counts = 176.2 +/- 13.3
  Background counts = 1.5
  Rate = 0.006 +/- 0.0005
[Sun Oct 30 20:09:34 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 20:09:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 20:09:34 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 20:09:34 2011] Source does appear to be extended
[Sun Oct 30 20:09:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 20:10:04 2011] Not overwriting source region fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7_src.reg
[Sun Oct 30 20:10:04 2011] Extracting stamp from image fullrun_ccd6_acisf11535_pi14-548_cl_sm2.00.img.gz, (372, 210) - (457, 295)
[Sun Oct 30 20:10:04 2011] Writing fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7.gif
[Sun Oct 30 20:10:06 2011] ../../acisf11535/products/events/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7_src.evt and ../../acisf11535/products/events/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sun Oct 30 20:10:06 2011] Size of ../../acisf11535/products/events/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7_src.evt.gz[events] = 179 counts
[Sun Oct 30 20:10:06 2011] Mean chipx,y = (809.65, 397.53)
[Sun Oct 30 20:10:06 2011] Mean tdetx,y = (3684.65, 2099.53)
[Sun Oct 30 20:10:06 2011] chipx,y range = (789.00-828.00, 378.00-418.00)
[Sun Oct 30 20:10:06 2011] Size of ../../acisf11535/products/events/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 18 counts
[Sun Oct 30 20:10:06 2011] ../../acisf11535/products/images/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7_src.img and ../../acisf11535/products/images/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Sun Oct 30 20:10:06 2011] ../../acisf11535/products/spectra/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7_src.pi and ../../acisf11535/products/spectra/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sun Oct 30 20:10:09 2011] ../../acisf11535/products/lightcurves/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7_src.lc and ../../acisf11535/products/lightcurves/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sun Oct 30 20:10:27 2011] Keeping rmf generated by specextract
[Sun Oct 30 20:10:28 2011] 203.78
[Sun Oct 30 20:11:01 2011] Updating aperture counts using extracted products
[Sun Oct 30 20:11:01 2011] Error reading totcts from fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7_src.pi.gz
[Sun Oct 30 20:11:01 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 20:11:01 2011] Using photon index=1.80, rate=0.00599, arf fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7.arf
[Sun Oct 30 20:11:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 20:11:01 2011] Updating source flux to 6.4e-14
[Sun Oct 30 20:11:06 2011] Flag b found in src. 7 procflags, skipping spectral fitting
[Sun Oct 30 20:11:09 2011] Reading fit data from acisf11535/analysis//spectral/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7_pl.csv
[Sun Oct 30 20:11:09 2011] Spectral fit parameter nH value = 1.67422e+13
[Sun Oct 30 20:11:09 2011] Spectral fit parameter PhoIndex value = 1.772
[Sun Oct 30 20:11:09 2011] Failed to get F(0.3-8.0) from acisf11535/analysis//spectral/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Sun Oct 30 20:11:09 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 20:11:09 2011] Using Nh = 1.7e+13, photon index=1.77, rate=0.00599, arf fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src7.arf
[Sun Oct 30 20:11:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 20:11:09 2011] Updating source flux to 6.7e-14