[Sun Oct 30 20:08:43 2011] Detection parameters:
  Position = (374.9, 468.7) = 22 40 24.16 3 26 37.8
  Extent = 0.8" x 0.6", rotation angle = 150 degrees
  Source counts = 23.9 +/- 5.0
  Background counts = 1.1
  Rate = 0.0008 +/- 0.0002

[Sun Oct 30 20:08:44 2011] Off-axis axis estimate = 5.12'
[Sun Oct 30 20:09:11 2011] Using EEF radius (= 1.23 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 20:09:11 2011] Initial guess for spatial extent in simple fitting = 1.23"
[Sun Oct 30 20:09:11 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.004
[Sun Oct 30 20:09:11 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.23"
[Sun Oct 30 20:09:12 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 30 20:09:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11535_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 20:09:12 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 30 20:09:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11535_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 20:09:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11535_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11535_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 20:09:12 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 30 20:09:12 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 30 20:09:12 2011] Fit fullrun_ccd6_acisf11535_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct 30 20:09:17 2011] Spatial fit model total counts = 52.601700, observed total counts = 55.000000
[Sun Oct 30 20:09:17 2011] Offset between fit and detection position for source 4 = 2.802320 pixels
[Sun Oct 30 20:09:17 2011] 51.785170 total counts/ 8.849470 bgd. counts: snr = 14.433110
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.802320 pixels
  Position = (374.2, 471.4) = 22 40 24.20 3 26 38.8
  Extent = 1.4 (1.0-2.1)", rotation angle = 0
  Source counts = 42.9 +/- 7.2
  Background counts = 8.8
  Rate = 0.001 +/- 0.0002
[Sun Oct 30 20:09:17 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 20:09:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 20:09:17 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 20:09:17 2011] Source does appear to be extended
[Sun Oct 30 20:09:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 20:09:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 20:09:28 2011] Initial guess for spatial extent in simple fitting = 1.40"
[Sun Oct 30 20:09:28 2011] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.100
[Sun Oct 30 20:09:28 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.40"
[Sun Oct 30 20:09:29 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 30 20:09:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11535_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 20:09:29 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 30 20:09:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11535_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 20:09:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11535_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11535_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 20:09:29 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 30 20:09:29 2011] fullrun_ccd6_acisf11535_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 30 20:09:29 2011] Fit fullrun_ccd6_acisf11535_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct 30 20:09:34 2011] Spatial fit model total counts = 54.834900, observed total counts = 57.000000
[Sun Oct 30 20:09:34 2011] Offset between fit and detection position for source 4 = 0.339255 pixels
[Sun Oct 30 20:09:34 2011] 55.242590 total counts/ 6.617590 bgd. counts: snr = 18.902084
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.339255 pixels
  Position = (373.9, 471.5) = 22 40 24.21 3 26 38.9
  Extent = 1.6 (1.1-2.0)", rotation angle = 0
  Source counts = 48.6 +/- 7.4
  Background counts = 6.6
  Rate = 0.002 +/- 0.0003
[Sun Oct 30 20:09:34 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 20:09:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 20:09:34 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 20:09:34 2011] Source does appear to be extended
[Sun Oct 30 20:09:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 20:10:04 2011] Not overwriting source region fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src4_src.reg
[Sun Oct 30 20:10:04 2011] Extracting stamp from image fullrun_ccd6_acisf11535_pi14-548_cl_sm2.00.img.gz, (300, 397) - (448, 546)
[Sun Oct 30 20:10:04 2011] Writing fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src4.gif
[Sun Oct 30 20:10:11 2011] ../../acisf11535/products/events/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src4_src.evt and ../../acisf11535/products/events/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sun Oct 30 20:10:11 2011] Size of ../../acisf11535/products/events/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src4_src.evt.gz[events] = 59 counts
[Sun Oct 30 20:10:11 2011] Mean chipx,y = (610.25, 490.08)
[Sun Oct 30 20:10:11 2011] Mean tdetx,y = (3485.25, 2192.08)
[Sun Oct 30 20:10:11 2011] chipx,y range = (588.00-630.00, 468.00-514.00)
[Sun Oct 30 20:10:12 2011] Size of ../../acisf11535/products/events/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 46 counts
[Sun Oct 30 20:10:12 2011] ../../acisf11535/products/images/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src4_src.img and ../../acisf11535/products/images/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Sun Oct 30 20:10:12 2011] ../../acisf11535/products/spectra/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src4_src.pi and ../../acisf11535/products/spectra/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sun Oct 30 20:10:12 2011] Not generating rmf since there are only 48 counts
[Sun Oct 30 20:10:14 2011] ../../acisf11535/products/lightcurves/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src4_src.lc and ../../acisf11535/products/lightcurves/fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sun Oct 30 20:10:29 2011] 191.271
[Sun Oct 30 20:11:01 2011] Updating aperture counts using extracted products
[Sun Oct 30 20:11:01 2011] Error reading totcts from fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src4_src.pi.gz
[Sun Oct 30 20:11:01 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 20:11:01 2011] Using photon index=1.80, rate=0.00165, arf fullrun_ccd6_acisf11535_pi14-548_pass1_cl_src4.arf
[Sun Oct 30 20:11:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 20:11:01 2011] Updating source flux to 1.9e-14
[Sun Oct 30 20:11:06 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting