[Tue Oct  4 09:52:52 2011] Detection parameters:
  Position = (315.6, 890.4) = 12 15 26.67 -14 32 53.4
  Extent = 0.9" x 0.5", rotation angle = 66 degrees
  Source counts = 10.1 +/- 3.3
  Background counts = 0.9
  Rate = 0.0003 +/- 0.0001

[Tue Oct  4 09:52:52 2011] Off-axis axis estimate = 3.37'
[Tue Oct  4 09:53:24 2011] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 09:53:24 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Tue Oct  4 09:53:24 2011] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.661
[Tue Oct  4 09:53:24 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.66"
[Tue Oct  4 09:53:24 2011] fullrun_ccd6_acisf11533_pi14-548_cl_pass0_src9.ximg exists
[Tue Oct  4 09:53:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11533_pi14-548_cl_pass0_src9.csv
[Tue Oct  4 09:53:24 2011] fullrun_ccd6_acisf11533_pi14-548_cl_pass0_src9_1.ximg exists
[Tue Oct  4 09:53:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11533_pi14-548_cl_pass0_src9.csv
[Tue Oct  4 09:53:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11533_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11533_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 09:53:25 2011] fullrun_ccd6_acisf11533_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Tue Oct  4 09:53:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11533_pi14-548_cl_pass0_tfrozen_src9.csv
[Tue Oct  4 09:53:25 2011] fullrun_ccd6_acisf11533_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Oct  4 09:53:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11533_pi14-548_cl_pass0_tfrozen_src9.csv
[Tue Oct  4 09:53:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11533_pi14-548_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11533_pi14-548_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 09:53:29 2011] Spatial fit model total counts = 14.766900, observed total counts = 17.000000
[Tue Oct  4 09:53:29 2011] Offset between fit and detection position for source 7 = 7.612823 pixels
[Tue Oct  4 09:53:29 2011] 16.584652 total counts/ 16.580800 bgd. counts: snr = 0.000946
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 7.612823 pixels
  Position = (320.4, 896.3) = 12 15 26.52 -14 32 50.7
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 0.0 +/- 4.1
  Background counts = 16.6
  Rate = 1e-07 +/- 0.0001
  Deleting source due to low Poisson probability