[Fri Sep 30 19:33:21 2011] Detection parameters:
  Position = (625.9, 634.5) = 0 42 11.63 -12 49 7.5
  Extent = 2.0" x 1.4", rotation angle = 131 degrees
  Source counts = 874.5 +/- 30.6
  Background counts = 64.5
  Rate = 0.02 +/- 0.0007

[Fri Sep 30 19:33:22 2011] Off-axis axis estimate = 6.72'
[Fri Sep 30 19:34:00 2011] Using EEF radius (= 2.02 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 19:34:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 19:34:00 2011] Initial guess for spatial extent in simple fitting = 2.02"
[Fri Sep 30 19:34:00 2011] source mask rpix=4.1, npix_max = 84, mask sum = 90, frac = 1.062
[Fri Sep 30 19:34:00 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.02"
[Fri Sep 30 19:34:00 2011] fullrun_ccd6_acisf11532_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 19:34:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11532_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 19:34:00 2011] fullrun_ccd6_acisf11532_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 19:34:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11532_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 19:34:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11532_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11532_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 19:34:01 2011] fullrun_ccd6_acisf11532_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 19:34:01 2011] fullrun_ccd6_acisf11532_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 19:34:01 2011] Fit fullrun_ccd6_acisf11532_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 19:34:08 2011] Spatial fit model total counts = 924.595000, observed total counts = 925.000000
[Fri Sep 30 19:34:08 2011] Offset between fit and detection position for source 1 = 0.799556 pixels
[Fri Sep 30 19:34:08 2011] 923.568300 total counts/ 32.172300 bgd. counts: snr = 157.155515
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.799556 pixels
  Position = (626.5, 635.1) = 0 42 11.63 -12 49 7.4
  Extent = 2.7 (2.5-2.8)", rotation angle = 0
  Source counts = 891.4 +/- 30.4
  Background counts = 32.2
  Rate = 0.02 +/- 0.0007
[Fri Sep 30 19:34:08 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 19:34:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 19:34:08 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 19:34:08 2011] Source does appear to be extended
[Fri Sep 30 19:34:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 19:34:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 19:34:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 19:34:23 2011] Initial guess for spatial extent in simple fitting = 2.69"
[Fri Sep 30 19:34:23 2011] source mask rpix=5.5, npix_max = 142, mask sum = 132, frac = 0.928
[Fri Sep 30 19:34:23 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.69"
[Fri Sep 30 19:34:24 2011] fullrun_ccd6_acisf11532_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 19:34:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11532_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 19:34:24 2011] fullrun_ccd6_acisf11532_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 19:34:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11532_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 19:34:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11532_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11532_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 19:34:25 2011] fullrun_ccd6_acisf11532_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 19:34:25 2011] fullrun_ccd6_acisf11532_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 19:34:25 2011] Fit fullrun_ccd6_acisf11532_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 19:34:31 2011] Spatial fit model total counts = 953.002000, observed total counts = 953.000000
[Fri Sep 30 19:34:31 2011] Offset between fit and detection position for source 1 = 0.080977 pixels
[Fri Sep 30 19:34:31 2011] 953.062300 total counts/ 53.932300 bgd. counts: snr = 122.432866
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.080977 pixels
  Position = (626.5, 635.0) = 0 42 11.63 -12 49 7.5
  Extent = 2.7 (2.6-2.8)", rotation angle = 0
  Source counts = 899.1 +/- 30.9
  Background counts = 53.9
  Rate = 0.02 +/- 0.0007
[Fri Sep 30 19:34:31 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 19:34:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 19:34:31 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 19:34:31 2011] Source does appear to be extended
[Fri Sep 30 19:34:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 19:34:48 2011] Not overwriting source region fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 30 19:34:48 2011] Extracting stamp from image fullrun_ccd6_acisf11532_pi14-548_cl_sm2.00.img.gz, (504, 512) - (749, 758)
[Fri Sep 30 19:34:48 2011] Writing fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1.gif
[Fri Sep 30 19:34:49 2011] ../../acisf11532/products/events/fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1_src.evt and ../../acisf11532/products/events/fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 30 19:34:49 2011] Size of ../../acisf11532/products/events/fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1_src.evt.gz[events] = 942 counts
[Fri Sep 30 19:34:49 2011] Mean chipx,y = (413.19, 432.53)
[Fri Sep 30 19:34:49 2011] Mean tdetx,y = (3288.19, 2134.53)
[Fri Sep 30 19:34:49 2011] chipx,y range = (384.00-447.00, 403.00-469.00)
[Fri Sep 30 19:34:49 2011] Size of ../../acisf11532/products/events/fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 278 counts
[Fri Sep 30 19:34:49 2011] ../../acisf11532/products/images/fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1_src.img and ../../acisf11532/products/images/fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 30 19:34:49 2011] ../../acisf11532/products/spectra/fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1_src.pi and ../../acisf11532/products/spectra/fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 30 19:34:52 2011] ../../acisf11532/products/lightcurves/fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1_src.lc and ../../acisf11532/products/lightcurves/fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 30 19:35:52 2011] Keeping rmf generated by specextract
[Fri Sep 30 19:35:52 2011] 183.614
[Fri Sep 30 19:37:23 2011] Updating aperture counts using extracted products
[Fri Sep 30 19:37:23 2011] Error reading totcts from fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 30 19:37:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 19:37:23 2011] Using photon index=1.80, rate=0.0202, arf fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 19:37:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 19:37:23 2011] Updating source flux to 2.4e-13
[Fri Sep 30 19:37:42 2011] Reading fit data from acisf11532/analysis//spectral/fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1_pl.csv
[Fri Sep 30 19:37:42 2011] Spectral fit parameter nH value = 8.93956e+21
[Fri Sep 30 19:37:42 2011] Spectral fit parameter PhoIndex value = 1.55344
[Fri Sep 30 19:37:42 2011] Failed to get F(0.3-8.0) from acisf11532/analysis//spectral/fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 19:37:42 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 19:37:42 2011] Using Nh = 8.9e+21, photon index=1.55, rate=0.0202, arf fullrun_ccd6_acisf11532_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 19:37:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 19:37:42 2011] Updating source flux to 3.4e-13