[Sun Sep 25 11:05:50 2011] Detection parameters:
  Position = (1044.6, 996.4) = 21 57 29.34 -69 40 9.5
  Extent = 0.7" x 0.5", rotation angle = 99 degrees
  Source counts = 11.4 +/- 3.7
  Background counts = 2.6
  Rate = 0.0002 +/- 7e-05

[Sun Sep 25 11:05:50 2011] Off-axis axis estimate = 3.00'
[Sun Sep 25 11:07:07 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:07 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Sun Sep 25 11:07:07 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.796
[Sun Sep 25 11:07:07 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 0.58"
[Sun Sep 25 11:07:08 2011] fullrun_ccd3_acisf11530_pi14-548_cl_pass0_src31.ximg exists
[Sun Sep 25 11:07:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11530_pi14-548_cl_pass0_src31.csv
[Sun Sep 25 11:07:08 2011] fullrun_ccd3_acisf11530_pi14-548_cl_pass0_src31_1.ximg exists
[Sun Sep 25 11:07:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11530_pi14-548_cl_pass0_src31.csv
[Sun Sep 25 11:07:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11530_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11530_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:08 2011] fullrun_ccd3_acisf11530_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Sun Sep 25 11:07:08 2011] fullrun_ccd3_acisf11530_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Sep 25 11:07:08 2011] Fit fullrun_ccd3_acisf11530_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Sun Sep 25 11:07:27 2011] Spatial fit model total counts = 29.404600, observed total counts = 29.000000
[Sun Sep 25 11:07:27 2011] Offset between fit and detection position for source 52 = 6.873265 pixels
[Sun Sep 25 11:07:27 2011] 30.170543 total counts/ 30.170500 bgd. counts: snr = 0.000008
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 6.873265 pixels
  Position = (1040.3, 1001.7) = 21 57 29.79 -69 40 7.1
  Extent = 1.5 (0.1-2.9)", rotation angle = 0
  Source counts = 0.0 +/- 5.5
  Background counts = 30.2
  Rate = 8e-10 +/- 0.0001
  Deleting source due to low Poisson probability