[Sun Sep 25 11:05:48 2011] Detection parameters:
  Position = (1250.5, 931.7) = 21 57 9.90 -69 40 41.4
  Extent = 0.9" x 0.5", rotation angle = 26 degrees
  Source counts = 42.7 +/- 7.2
  Background counts = 9.3
  Rate = 0.0008 +/- 0.0001

[Sun Sep 25 11:05:50 2011] Off-axis axis estimate = 1.30'
[Sun Sep 25 11:07:07 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:07 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Sep 25 11:07:07 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.370
[Sun Sep 25 11:07:07 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.38"
[Sun Sep 25 11:07:07 2011] fullrun_ccd3_acisf11530_pi14-548_cl_pass0_src9.ximg exists
[Sun Sep 25 11:07:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11530_pi14-548_cl_pass0_src9.csv
[Sun Sep 25 11:07:07 2011] fullrun_ccd3_acisf11530_pi14-548_cl_pass0_src9_1.ximg exists
[Sun Sep 25 11:07:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11530_pi14-548_cl_pass0_src9.csv
[Sun Sep 25 11:07:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11530_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11530_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:08 2011] fullrun_ccd3_acisf11530_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun Sep 25 11:07:08 2011] fullrun_ccd3_acisf11530_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Sep 25 11:07:08 2011] Fit fullrun_ccd3_acisf11530_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Sep 25 11:07:27 2011] Spatial fit model total counts = 62.999200, observed total counts = 63.000000
[Sun Sep 25 11:07:27 2011] Offset between fit and detection position for source 14 = 0.718618 pixels
[Sun Sep 25 11:07:27 2011] 62.085400 total counts/ 23.105900 bgd. counts: snr = 8.109140
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.718618 pixels
  Position = (1251.0, 932.3) = 21 57 9.91 -69 40 41.4
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 39.0 +/- 7.9
  Background counts = 23.1
  Rate = 0.0007 +/- 0.0001
[Sun Sep 25 11:07:27 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:07:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:07:27 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:07:27 2011] Source does appear to be extended
[Sun Sep 25 11:07:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:07:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:54 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Sun Sep 25 11:07:54 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.144
[Sun Sep 25 11:07:54 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.55"
[Sun Sep 25 11:07:54 2011] fullrun_ccd3_acisf11530_pi14-548_cl_pass1_src9.ximg exists
[Sun Sep 25 11:07:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11530_pi14-548_cl_pass1_src9.csv
[Sun Sep 25 11:07:54 2011] fullrun_ccd3_acisf11530_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Sep 25 11:07:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11530_pi14-548_cl_pass1_src9.csv
[Sun Sep 25 11:07:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11530_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11530_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:55 2011] fullrun_ccd3_acisf11530_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Sep 25 11:07:55 2011] fullrun_ccd3_acisf11530_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Sep 25 11:07:55 2011] Fit fullrun_ccd3_acisf11530_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Sep 25 11:08:10 2011] Spatial fit model total counts = 62.999000, observed total counts = 63.000000
[Sun Sep 25 11:08:10 2011] Offset between fit and detection position for source 14 = 0.007327 pixels
[Sun Sep 25 11:08:10 2011] 61.946500 total counts/ 23.150200 bgd. counts: snr = 8.063302
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.007327 pixels
  Position = (1251.0, 932.3) = 21 57 9.91 -69 40 41.4
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 38.8 +/- 7.9
  Background counts = 23.2
  Rate = 0.0007 +/- 0.0001
[Sun Sep 25 11:08:10 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:08:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:08:10 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:08:10 2011] Source does appear to be extended
[Sun Sep 25 11:08:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:13:46 2011] Not overwriting source region fullrun_ccd3_acisf11530_pi14-548_pass1_cl_src14_src.reg
[Sun Sep 25 11:13:46 2011] Extracting stamp from image fullrun_ccd3_acisf11530_pi14-548_cl_sm2.00.img.gz, (1226, 907) - (1276, 957)
[Sun Sep 25 11:13:46 2011] Writing fullrun_ccd3_acisf11530_pi14-548_pass1_cl_src14.gif
[Sun Sep 25 11:14:12 2011] ../../acisf11530/products/events/fullrun_ccd3_acisf11530_pi14-548_pass1_cl_src14_src.evt and ../../acisf11530/products/events/fullrun_ccd3_acisf11530_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sun Sep 25 11:14:12 2011] Size of ../../acisf11530/products/events/fullrun_ccd3_acisf11530_pi14-548_pass1_cl_src14_src.evt.gz[events] = 44 counts
[Sun Sep 25 11:14:12 2011] Mean chipx,y = (978.75, 870.23)
[Sun Sep 25 11:14:12 2011] Mean tdetx,y = (4261.77, 4039.75)
[Sun Sep 25 11:14:12 2011] chipx,y range = (958.00-998.00, 854.00-889.00)
[Sun Sep 25 11:14:12 2011] Size of ../../acisf11530/products/events/fullrun_ccd3_acisf11530_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 66 counts
[Sun Sep 25 11:14:12 2011] ../../acisf11530/products/images/fullrun_ccd3_acisf11530_pi14-548_pass1_cl_src14_src.img and ../../acisf11530/products/images/fullrun_ccd3_acisf11530_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Sun Sep 25 11:14:12 2011] ../../acisf11530/products/spectra/fullrun_ccd3_acisf11530_pi14-548_pass1_cl_src14_src.pi and ../../acisf11530/products/spectra/fullrun_ccd3_acisf11530_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Sun Sep 25 11:14:12 2011] Not generating rmf since there are only 38 counts
[Sun Sep 25 11:14:15 2011] ../../acisf11530/products/lightcurves/fullrun_ccd3_acisf11530_pi14-548_pass1_cl_src14_src.lc and ../../acisf11530/products/lightcurves/fullrun_ccd3_acisf11530_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Sun Sep 25 11:14:19 2011] 202.47
[Sun Sep 25 11:14:39 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:14:39 2011] Error reading totcts from fullrun_ccd3_acisf11530_pi14-548_pass1_cl_src14_src.pi.gz
[Sun Sep 25 11:14:39 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:14:39 2011] Using photon index=1.80, rate=0.000684, arf fullrun_ccd3_acisf11530_pi14-548_pass1_cl_src14.arf
[Sun Sep 25 11:14:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:14:39 2011] Updating source flux to 7.9e-15
[Sun Sep 25 11:15:09 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting