[Sun Sep 25 11:05:45 2011] Detection parameters:
  Position = (593.6, 1302.6) = 21 56 47.59 -69 41 51.3
  Extent = 0.7" x 0.5", rotation angle = 105 degrees
  Source counts = 15.3 +/- 4.2
  Background counts = 2.7
  Rate = 0.0003 +/- 7e-05

[Sun Sep 25 11:05:47 2011] Off-axis axis estimate = 1.01'
[Sun Sep 25 11:07:06 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:06 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Sep 25 11:07:06 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.390
[Sun Sep 25 11:07:06 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.38"
[Sun Sep 25 11:07:06 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src15.ximg exists
[Sun Sep 25 11:07:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src15.csv
[Sun Sep 25 11:07:06 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src15_1.ximg exists
[Sun Sep 25 11:07:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src15.csv
[Sun Sep 25 11:07:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:07 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Sun Sep 25 11:07:07 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Sep 25 11:07:07 2011] Fit fullrun_ccd2_acisf11530_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Sep 25 11:07:22 2011] Spatial fit model total counts = 24.537800, observed total counts = 25.000000
[Sun Sep 25 11:07:22 2011] Offset between fit and detection position for source 9 = 0.738553 pixels
[Sun Sep 25 11:07:22 2011] 23.535020 total counts/ 7.832520 bgd. counts: snr = 5.610713
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.738553 pixels
  Position = (594.0, 1303.3) = 21 56 47.61 -69 41 51.3
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 15.7 +/- 4.9
  Background counts = 7.8
  Rate = 0.0003 +/- 9e-05
[Sun Sep 25 11:07:22 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:07:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:07:22 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:07:22 2011] Source does appear to be extended
[Sun Sep 25 11:07:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:07:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:53 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sun Sep 25 11:07:53 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.976
[Sun Sep 25 11:07:53 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.62"
[Sun Sep 25 11:07:53 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src15.ximg exists
[Sun Sep 25 11:07:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src15.csv
[Sun Sep 25 11:07:53 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src15_1.ximg exists
[Sun Sep 25 11:07:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src15.csv
[Sun Sep 25 11:07:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:54 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Sun Sep 25 11:07:54 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Sep 25 11:07:54 2011] Fit fullrun_ccd2_acisf11530_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Sep 25 11:08:08 2011] Spatial fit model total counts = 22.274300, observed total counts = 23.000000
[Sun Sep 25 11:08:08 2011] Offset between fit and detection position for source 9 = 0.041804 pixels
[Sun Sep 25 11:08:08 2011] 21.270520 total counts/ 5.032220 bgd. counts: snr = 7.238703
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.041804 pixels
  Position = (594.0, 1303.3) = 21 56 47.61 -69 41 51.3
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 16.2 +/- 4.6
  Background counts = 5.0
  Rate = 0.0003 +/- 8e-05
[Sun Sep 25 11:08:08 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:08:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:08:08 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:08:08 2011] Source does appear to be extended
[Sun Sep 25 11:08:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:12:25 2011] Not overwriting source region fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src9_src.reg
[Sun Sep 25 11:12:25 2011] Extracting stamp from image fullrun_ccd2_acisf11530_pi14-548_cl_sm2.00.img.gz, (566, 1275) - (622, 1332)
[Sun Sep 25 11:12:25 2011] Writing fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src9.gif
[Sun Sep 25 11:13:17 2011] ../../acisf11530/products/events/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src9_src.evt and ../../acisf11530/products/events/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Sep 25 11:13:17 2011] Size of ../../acisf11530/products/events/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src9_src.evt.gz[events] = 18 counts
[Sun Sep 25 11:13:17 2011] Mean chipx,y = (43.22, 921.78)
[Sun Sep 25 11:13:17 2011] Mean tdetx,y = (3982.78, 4042.78)
[Sun Sep 25 11:13:17 2011] chipx,y range = (29.00-62.00, 908.00-940.00)
[Sun Sep 25 11:13:17 2011] Size of ../../acisf11530/products/events/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 36 counts
[Sun Sep 25 11:13:17 2011] ../../acisf11530/products/images/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src9_src.img and ../../acisf11530/products/images/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Sep 25 11:13:17 2011] ../../acisf11530/products/spectra/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src9_src.pi and ../../acisf11530/products/spectra/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun Sep 25 11:13:17 2011] Not generating rmf since there are only 16 counts
[Sun Sep 25 11:13:20 2011] ../../acisf11530/products/lightcurves/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src9_src.lc and ../../acisf11530/products/lightcurves/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Sep 25 11:13:45 2011] 201.299
[Sun Sep 25 11:14:38 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:14:38 2011] Error reading totcts from fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src9_src.pi.gz
[Sun Sep 25 11:14:39 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:14:39 2011] Using photon index=1.80, rate=0.000286, arf fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src9.arf
[Sun Sep 25 11:14:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:14:39 2011] Updating source flux to 3.3e-15
[Sun Sep 25 11:15:04 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting