[Sun Sep 25 11:05:46 2011] Detection parameters:
  Position = (227.1, 587.4) = 21 57 22.35 -69 47 43.1
  Extent = 2.2" x 1.3", rotation angle = 157 degrees
  Source counts = 470.0 +/- 22.5
  Background counts = 35.0
  Rate = 0.008 +/- 0.0004

[Sun Sep 25 11:05:47 2011] Off-axis axis estimate = 6.49'
[Sun Sep 25 11:07:06 2011] Using EEF radius (= 1.89 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 11:07:06 2011] Initial guess for spatial extent in simple fitting = 1.89"
[Sun Sep 25 11:07:06 2011] source mask rpix=3.8, npix_max = 75, mask sum = 72, frac = 0.957
[Sun Sep 25 11:07:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.89"
[Sun Sep 25 11:07:06 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src1.ximg exists
[Sun Sep 25 11:07:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 11:07:06 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Sep 25 11:07:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 11:07:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:06 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 11:07:06 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 11:07:06 2011] Fit fullrun_ccd2_acisf11530_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep 25 11:07:22 2011] Spatial fit model total counts = 502.000000, observed total counts = 502.000000
[Sun Sep 25 11:07:22 2011] Offset between fit and detection position for source 18 = 0.391714 pixels
[Sun Sep 25 11:07:22 2011] 503.612900 total counts/ 78.257900 bgd. counts: snr = 48.082545
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.391714 pixels
  Position = (227.2, 587.8) = 21 57 22.38 -69 47 43.2
  Extent = 1.8 (1.7-2.0)", rotation angle = 0
  Source counts = 425.4 +/- 22.4
  Background counts = 78.3
  Rate = 0.007 +/- 0.0004
[Sun Sep 25 11:07:22 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:07:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:07:22 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:07:22 2011] Source does appear to be extended
[Sun Sep 25 11:07:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:07:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 11:07:53 2011] Initial guess for spatial extent in simple fitting = 1.81"
[Sun Sep 25 11:07:53 2011] source mask rpix=3.7, npix_max = 70, mask sum = 64, frac = 0.914
[Sun Sep 25 11:07:53 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.81"
[Sun Sep 25 11:07:53 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src1.ximg exists
[Sun Sep 25 11:07:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 11:07:53 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Sep 25 11:07:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 11:07:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:54 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep 25 11:07:54 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep 25 11:07:54 2011] Fit fullrun_ccd2_acisf11530_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep 25 11:08:08 2011] Spatial fit model total counts = 492.989000, observed total counts = 493.000000
[Sun Sep 25 11:08:08 2011] Offset between fit and detection position for source 18 = 0.038910 pixels
[Sun Sep 25 11:08:08 2011] 494.980900 total counts/ 72.105900 bgd. counts: snr = 49.799687
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.038910 pixels
  Position = (227.2, 587.8) = 21 57 22.39 -69 47 43.2
  Extent = 1.8 (1.6-1.9)", rotation angle = 0
  Source counts = 422.9 +/- 22.2
  Background counts = 72.1
  Rate = 0.007 +/- 0.0004
[Sun Sep 25 11:08:08 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:08:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:08:08 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:08:08 2011] Source does appear to be extended
[Sun Sep 25 11:08:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:12:25 2011] Not overwriting source region fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18_src.reg
[Sun Sep 25 11:12:25 2011] Extracting stamp from image fullrun_ccd2_acisf11530_pi14-548_cl_sm2.00.img.gz, (145, 505) - (310, 670)
[Sun Sep 25 11:12:25 2011] Writing fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18.gif
[Sun Sep 25 11:12:26 2011] ../../acisf11530/products/events/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18_src.evt and ../../acisf11530/products/events/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sun Sep 25 11:12:26 2011] Size of ../../acisf11530/products/events/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18_src.evt.gz[events] = 490 counts
[Sun Sep 25 11:12:26 2011] Mean chipx,y = (850.32, 866.49)
[Sun Sep 25 11:12:26 2011] Mean tdetx,y = (3927.49, 3235.68)
[Sun Sep 25 11:12:26 2011] chipx,y range = (823.00-879.00, 841.00-895.00)
[Sun Sep 25 11:12:26 2011] Size of ../../acisf11530/products/events/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 172 counts
[Sun Sep 25 11:12:26 2011] ../../acisf11530/products/images/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18_src.img and ../../acisf11530/products/images/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Sun Sep 25 11:12:26 2011] ../../acisf11530/products/spectra/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18_src.pi and ../../acisf11530/products/spectra/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sun Sep 25 11:12:29 2011] ../../acisf11530/products/lightcurves/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18_src.lc and ../../acisf11530/products/lightcurves/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sun Sep 25 11:13:45 2011] Keeping rmf generated by specextract
[Sun Sep 25 11:13:45 2011] 170.66
[Sun Sep 25 11:14:38 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:14:38 2011] Error reading totcts from fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18_src.pi.gz
[Sun Sep 25 11:14:38 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:14:38 2011] Using photon index=1.80, rate=0.00745, arf fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18.arf
[Sun Sep 25 11:14:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:14:38 2011] Updating source flux to 1e-13
[Sun Sep 25 11:15:08 2011] Reading fit data from acisf11530/analysis//spectral/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18_pl.csv
[Sun Sep 25 11:15:08 2011] Spectral fit parameter nH value = 1.17394e+21
[Sun Sep 25 11:15:08 2011] Spectral fit parameter PhoIndex value = 1.69093
[Sun Sep 25 11:15:08 2011] Failed to get F(0.3-8.0) from acisf11530/analysis//spectral/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 11:15:08 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:15:08 2011] Using Nh = 1.2e+21, photon index=1.69, rate=0.00745, arf fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src18.arf
[Sun Sep 25 11:15:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:15:08 2011] Updating source flux to 1e-13