[Sun Sep 25 11:05:46 2011] Detection parameters:
  Position = (861.7, 713.6) = 21 56 22.11 -69 46 40.9
  Extent = 2.1" x 0.9", rotation angle = 173 degrees
  Source counts = 28.8 +/- 6.1
  Background counts = 8.2
  Rate = 0.0005 +/- 0.0001

[Sun Sep 25 11:05:47 2011] Off-axis axis estimate = 6.03'
[Sun Sep 25 11:07:06 2011] Using EEF radius (= 1.64 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:06 2011] Initial guess for spatial extent in simple fitting = 1.64"
[Sun Sep 25 11:07:06 2011] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.950
[Sun Sep 25 11:07:06 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.64"
[Sun Sep 25 11:07:06 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src6.ximg exists
[Sun Sep 25 11:07:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src6.csv
[Sun Sep 25 11:07:06 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src6_1.ximg exists
[Sun Sep 25 11:07:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src6.csv
[Sun Sep 25 11:07:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11530_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:06 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sun Sep 25 11:07:06 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Sep 25 11:07:06 2011] Fit fullrun_ccd2_acisf11530_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Sep 25 11:07:22 2011] Spatial fit model total counts = 37.998800, observed total counts = 38.000000
[Sun Sep 25 11:07:22 2011] Offset between fit and detection position for source 14 = 2.134607 pixels
[Sun Sep 25 11:07:22 2011] 37.520800 total counts/ 16.338000 bgd. counts: snr = 5.240635
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 2.134607 pixels
  Position = (863.9, 713.6) = 21 56 21.95 -69 46 41.2
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 21.2 +/- 6.1
  Background counts = 16.3
  Rate = 0.0004 +/- 0.0001
[Sun Sep 25 11:07:22 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:07:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:07:22 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:07:22 2011] Source does appear to be extended
[Sun Sep 25 11:07:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:07:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:53 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Sun Sep 25 11:07:53 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.922
[Sun Sep 25 11:07:53 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.90"
[Sun Sep 25 11:07:53 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src6.ximg exists
[Sun Sep 25 11:07:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src6.csv
[Sun Sep 25 11:07:53 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src6_1.ximg exists
[Sun Sep 25 11:07:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src6.csv
[Sun Sep 25 11:07:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11530_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:54 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sun Sep 25 11:07:54 2011] fullrun_ccd2_acisf11530_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Sep 25 11:07:54 2011] Fit fullrun_ccd2_acisf11530_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Sep 25 11:08:08 2011] Spatial fit model total counts = 34.200000, observed total counts = 33.000000
[Sun Sep 25 11:08:08 2011] Offset between fit and detection position for source 14 = 0.167062 pixels
[Sun Sep 25 11:08:08 2011] 33.819000 total counts/ 13.038100 bgd. counts: snr = 5.755157
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.167062 pixels
  Position = (863.9, 713.4) = 21 56 21.95 -69 46 41.2
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 20.8 +/- 5.8
  Background counts = 13.0
  Rate = 0.0004 +/- 0.0001
[Sun Sep 25 11:08:08 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:08:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:08:08 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:08:08 2011] Source does appear to be extended
[Sun Sep 25 11:08:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:12:25 2011] Not overwriting source region fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src14_src.reg
[Sun Sep 25 11:12:25 2011] Extracting stamp from image fullrun_ccd2_acisf11530_pi14-548_cl_sm2.00.img.gz, (825, 675) - (903, 752)
[Sun Sep 25 11:12:25 2011] Writing fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src14.gif
[Sun Sep 25 11:12:42 2011] ../../acisf11530/products/events/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src14_src.evt and ../../acisf11530/products/events/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sun Sep 25 11:12:42 2011] Size of ../../acisf11530/products/events/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src14_src.evt.gz[events] = 28 counts
[Sun Sep 25 11:12:42 2011] Mean chipx,y = (413.54, 388.11)
[Sun Sep 25 11:12:42 2011] Mean tdetx,y = (3449.11, 3672.46)
[Sun Sep 25 11:12:42 2011] chipx,y range = (396.00-431.00, 366.00-407.00)
[Sun Sep 25 11:12:42 2011] Size of ../../acisf11530/products/events/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 30 counts
[Sun Sep 25 11:12:42 2011] ../../acisf11530/products/images/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src14_src.img and ../../acisf11530/products/images/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Sun Sep 25 11:12:42 2011] ../../acisf11530/products/spectra/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src14_src.pi and ../../acisf11530/products/spectra/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Sun Sep 25 11:12:42 2011] Not generating rmf since there are only 20 counts
[Sun Sep 25 11:12:49 2011] ../../acisf11530/products/lightcurves/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src14_src.lc and ../../acisf11530/products/lightcurves/fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Sun Sep 25 11:13:45 2011] 176.042
[Sun Sep 25 11:14:38 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:14:38 2011] Error reading totcts from fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src14_src.pi.gz
[Sun Sep 25 11:14:39 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:14:39 2011] Using photon index=1.80, rate=0.000366, arf fullrun_ccd2_acisf11530_pi14-548_pass1_cl_src14.arf
[Sun Sep 25 11:14:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:14:39 2011] Updating source flux to 4.8e-15
[Sun Sep 25 11:15:04 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting