[Sun Sep 25 11:05:44 2011] Detection parameters:
  Position = (918.8, 967.7) = 21 56 49.82 -69 33 0.4
  Extent = 3.2" x 2.7", rotation angle = 17 degrees
  Source counts = 65.6 +/- 9.8
  Background counts = 31.4
  Rate = 0.001 +/- 0.0002

[Sun Sep 25 11:05:45 2011] Off-axis axis estimate = 8.59'
[Sun Sep 25 11:07:04 2011] Using EEF radius (= 3.26 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:04 2011] Initial guess for spatial extent in simple fitting = 3.26"
[Sun Sep 25 11:07:04 2011] source mask rpix=6.6, npix_max = 202, mask sum = 196, frac = 0.967
[Sun Sep 25 11:07:04 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 3.26"
[Sun Sep 25 11:07:05 2011] fullrun_ccd1_acisf11530_pi14-548_cl_pass0_src7.ximg exists
[Sun Sep 25 11:07:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11530_pi14-548_cl_pass0_src7.csv
[Sun Sep 25 11:07:05 2011] fullrun_ccd1_acisf11530_pi14-548_cl_pass0_src7_1.ximg exists
[Sun Sep 25 11:07:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11530_pi14-548_cl_pass0_src7.csv
[Sun Sep 25 11:07:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11530_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11530_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:05 2011] fullrun_ccd1_acisf11530_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sun Sep 25 11:07:05 2011] fullrun_ccd1_acisf11530_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Sep 25 11:07:05 2011] Fit fullrun_ccd1_acisf11530_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Sep 25 11:07:20 2011] Spatial fit model total counts = 97.085700, observed total counts = 98.000000
[Sun Sep 25 11:07:20 2011] Offset between fit and detection position for source 20 = 1.315391 pixels
[Sun Sep 25 11:07:20 2011] 97.560800 total counts/ 50.822500 bgd. counts: snr = 6.556090
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.315391 pixels
  Position = (917.6, 968.3) = 21 56 49.97 -69 33 0.4
  Extent = 1.8 (1.3-2.5)", rotation angle = 0
  Source counts = 46.7 +/- 9.9
  Background counts = 50.8
  Rate = 0.0008 +/- 0.0002
[Sun Sep 25 11:07:20 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:07:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:07:20 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:07:20 2011] Source does appear to be extended
[Sun Sep 25 11:07:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:07:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:51 2011] Initial guess for spatial extent in simple fitting = 1.84"
[Sun Sep 25 11:07:51 2011] source mask rpix=3.7, npix_max = 71, mask sum = 81, frac = 1.129
[Sun Sep 25 11:07:51 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 1.84"
[Sun Sep 25 11:07:52 2011] fullrun_ccd1_acisf11530_pi14-548_cl_pass1_src7.ximg exists
[Sun Sep 25 11:07:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11530_pi14-548_cl_pass1_src7.csv
[Sun Sep 25 11:07:52 2011] fullrun_ccd1_acisf11530_pi14-548_cl_pass1_src7_1.ximg exists
[Sun Sep 25 11:07:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11530_pi14-548_cl_pass1_src7.csv
[Sun Sep 25 11:07:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11530_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11530_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:52 2011] fullrun_ccd1_acisf11530_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sun Sep 25 11:07:52 2011] fullrun_ccd1_acisf11530_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Sep 25 11:07:52 2011] Fit fullrun_ccd1_acisf11530_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Sep 25 11:08:05 2011] Spatial fit model total counts = 61.999900, observed total counts = 62.000000
[Sun Sep 25 11:08:05 2011] Offset between fit and detection position for source 20 = 1.124309 pixels
[Sun Sep 25 11:08:05 2011] 63.027200 total counts/ 35.547100 bgd. counts: snr = 4.609101
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.124309 pixels
  Position = (917.1, 967.3) = 21 56 50.01 -69 33 0.9
  Extent = 1.0 (0.7-2.6)", rotation angle = 0
  Source counts = 27.5 +/- 7.9
  Background counts = 35.5
  Rate = 0.0005 +/- 0.0001
[Sun Sep 25 11:08:05 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:08:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:08:05 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:08:05 2011] Source does appear to be extended
[Sun Sep 25 11:08:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:11:05 2011] Not overwriting source region fullrun_ccd1_acisf11530_pi14-548_pass1_cl_src20_src.reg
[Sun Sep 25 11:11:05 2011] Extracting stamp from image fullrun_ccd1_acisf11530_pi14-548_cl_sm2.00.img.gz, (872, 923) - (962, 1012)
[Sun Sep 25 11:11:05 2011] Writing fullrun_ccd1_acisf11530_pi14-548_pass1_cl_src20.gif
[Sun Sep 25 11:11:26 2011] ../../acisf11530/products/events/fullrun_ccd1_acisf11530_pi14-548_pass1_cl_src20_src.evt and ../../acisf11530/products/events/fullrun_ccd1_acisf11530_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Sun Sep 25 11:11:26 2011] Size of ../../acisf11530/products/events/fullrun_ccd1_acisf11530_pi14-548_pass1_cl_src20_src.evt.gz[events] = 46 counts
[Sun Sep 25 11:11:26 2011] Mean chipx,y = (843.37, 565.17)
[Sun Sep 25 11:11:26 2011] Mean tdetx,y = (4566.83, 4950.37)
[Sun Sep 25 11:11:26 2011] chipx,y range = (823.00-866.00, 544.00-584.00)
[Sun Sep 25 11:11:26 2011] Size of ../../acisf11530/products/events/fullrun_ccd1_acisf11530_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 60 counts
[Sun Sep 25 11:11:26 2011] ../../acisf11530/products/images/fullrun_ccd1_acisf11530_pi14-548_pass1_cl_src20_src.img and ../../acisf11530/products/images/fullrun_ccd1_acisf11530_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Sun Sep 25 11:11:26 2011] ../../acisf11530/products/spectra/fullrun_ccd1_acisf11530_pi14-548_pass1_cl_src20_src.pi and ../../acisf11530/products/spectra/fullrun_ccd1_acisf11530_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Sun Sep 25 11:11:26 2011] Not generating rmf since there are only 27 counts
[Sun Sep 25 11:11:31 2011] ../../acisf11530/products/lightcurves/fullrun_ccd1_acisf11530_pi14-548_pass1_cl_src20_src.lc and ../../acisf11530/products/lightcurves/fullrun_ccd1_acisf11530_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Sun Sep 25 11:12:24 2011] 171.811
[Sun Sep 25 11:14:38 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:14:38 2011] Error reading totcts from fullrun_ccd1_acisf11530_pi14-548_pass1_cl_src20_src.pi.gz
[Sun Sep 25 11:14:38 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:14:38 2011] Using photon index=1.80, rate=0.000484, arf fullrun_ccd1_acisf11530_pi14-548_pass1_cl_src20.arf
[Sun Sep 25 11:14:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:14:38 2011] Updating source flux to 6.6e-15
[Sun Sep 25 11:14:50 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting