[Sun Sep 25 11:05:39 2011] Detection parameters:
  Position = (338.9, 377.6) = 21 56 20.42 -69 42 8.3
  Extent = 0.9" x 0.5", rotation angle = 26 degrees
  Source counts = 103.0 +/- 10.3
  Background counts = 3.0
  Rate = 0.002 +/- 0.0002

[Sun Sep 25 11:05:42 2011] Off-axis axis estimate = 3.37'
[Sun Sep 25 11:07:03 2011] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:03 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Sun Sep 25 11:07:03 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.882
[Sun Sep 25 11:07:03 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.66"
[Sun Sep 25 11:07:03 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src6.ximg exists
[Sun Sep 25 11:07:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src6.csv
[Sun Sep 25 11:07:03 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src6_1.ximg exists
[Sun Sep 25 11:07:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src6.csv
[Sun Sep 25 11:07:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:04 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sun Sep 25 11:07:04 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Sep 25 11:07:04 2011] Fit fullrun_ccd0_acisf11530_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Sep 25 11:07:17 2011] Spatial fit model total counts = 99.574200, observed total counts = 106.000000
[Sun Sep 25 11:07:17 2011] Offset between fit and detection position for source 6 = 0.346427 pixels
[Sun Sep 25 11:07:17 2011] 101.697378 total counts/ 0.182378 bgd. counts: snr = 237.708108
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.346427 pixels
  Position = (339.1, 377.9) = 21 56 20.46 -69 42 8.4
  Extent = 0.8 (0.8-0.9)", rotation angle = 0
  Source counts = 101.5 +/- 10.1
  Background counts = 0.2
  Rate = 0.002 +/- 0.0002
[Sun Sep 25 11:07:17 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:07:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:07:17 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:07:17 2011] Source does appear to be extended
[Sun Sep 25 11:07:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:07:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:50 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Sun Sep 25 11:07:50 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.812
[Sun Sep 25 11:07:50 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.85"
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src6.ximg exists
[Sun Sep 25 11:07:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src6.csv
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src6_1.ximg exists
[Sun Sep 25 11:07:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src6.csv
[Sun Sep 25 11:07:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Sep 25 11:07:51 2011] Fit fullrun_ccd0_acisf11530_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Sep 25 11:08:03 2011] Spatial fit model total counts = 101.712000, observed total counts = 106.000000
[Sun Sep 25 11:08:03 2011] Offset between fit and detection position for source 6 = 0.081233 pixels
[Sun Sep 25 11:08:03 2011] 103.225017 total counts/ 0.740017 bgd. counts: snr = 119.135024
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.081233 pixels
  Position = (339.1, 378.0) = 21 56 20.45 -69 42 8.4
  Extent = 0.9 (0.8-0.9)", rotation angle = 0
  Source counts = 102.5 +/- 10.2
  Background counts = 0.7
  Rate = 0.002 +/- 0.0002
[Sun Sep 25 11:08:03 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:08:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:08:03 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:08:03 2011] Source does appear to be extended
[Sun Sep 25 11:08:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:08:42 2011] Not overwriting source region fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src6_src.reg
[Sun Sep 25 11:08:42 2011] Extracting stamp from image fullrun_ccd0_acisf11530_pi14-548_cl_sm2.00.img.gz, (300, 338) - (379, 418)
[Sun Sep 25 11:08:42 2011] Writing fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src6.gif
[Sun Sep 25 11:09:21 2011] ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src6_src.evt and ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sun Sep 25 11:09:21 2011] Size of ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src6_src.evt.gz[events] = 105 counts
[Sun Sep 25 11:09:21 2011] Mean chipx,y = (975.04, 659.17)
[Sun Sep 25 11:09:21 2011] Mean tdetx,y = (3720.17, 4156.96)
[Sun Sep 25 11:09:21 2011] chipx,y range = (954.00-995.00, 639.00-678.00)
[Sun Sep 25 11:09:21 2011] Size of ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 48 counts
[Sun Sep 25 11:09:21 2011] ../../acisf11530/products/images/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src6_src.img and ../../acisf11530/products/images/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Sun Sep 25 11:09:21 2011] ../../acisf11530/products/spectra/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src6_src.pi and ../../acisf11530/products/spectra/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sun Sep 25 11:09:25 2011] ../../acisf11530/products/lightcurves/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src6_src.lc and ../../acisf11530/products/lightcurves/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sun Sep 25 11:11:04 2011] Keeping rmf generated by specextract
[Sun Sep 25 11:11:04 2011] 177.076
[Sun Sep 25 11:14:37 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:14:37 2011] Error reading totcts from fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src6_src.pi.gz
[Sun Sep 25 11:14:37 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:14:37 2011] Using photon index=1.80, rate=0.00181, arf fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src6.arf
[Sun Sep 25 11:14:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:14:37 2011] Updating source flux to 2.4e-14