[Sun Sep 25 11:05:39 2011] Detection parameters:
  Position = (116.5, 561.5) = 21 56 41.48 -69 40 38.1
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 59.1 +/- 7.8
  Background counts = 1.9
  Rate = 0.001 +/- 0.0001

[Sun Sep 25 11:05:42 2011] Off-axis axis estimate = 1.76'
[Sun Sep 25 11:07:03 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:03 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sun Sep 25 11:07:03 2011] source mask rpix=0.8, npix_max = 7, mask sum = 5, frac = 0.706
[Sun Sep 25 11:07:03 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.41"
[Sun Sep 25 11:07:03 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src3.ximg exists
[Sun Sep 25 11:07:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src3.csv
[Sun Sep 25 11:07:03 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Sep 25 11:07:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src3.csv
[Sun Sep 25 11:07:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:04 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Sep 25 11:07:04 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Sep 25 11:07:04 2011] Fit fullrun_ccd0_acisf11530_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Sep 25 11:07:17 2011] Spatial fit model total counts = 63.765100, observed total counts = 70.000000
[Sun Sep 25 11:07:17 2011] Offset between fit and detection position for source 3 = 1.037486 pixels
[Sun Sep 25 11:07:17 2011] 63.772570 total counts/ 1.897370 bgd. counts: snr = 44.920088
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.037486 pixels
  Position = (117.2, 562.2) = 21 56 41.45 -69 40 38.0
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 61.9 +/- 8.0
  Background counts = 1.9
  Rate = 0.001 +/- 0.0001
[Sun Sep 25 11:07:17 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:07:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:07:17 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:07:17 2011] Source does appear to be extended
[Sun Sep 25 11:07:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:07:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:50 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Sun Sep 25 11:07:50 2011] source mask rpix=0.9, npix_max = 8, mask sum = 8, frac = 0.974
[Sun Sep 25 11:07:50 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.46"
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src3.ximg exists
[Sun Sep 25 11:07:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src3.csv
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Sep 25 11:07:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src3.csv
[Sun Sep 25 11:07:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Sep 25 11:07:51 2011] Fit fullrun_ccd0_acisf11530_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Sep 25 11:08:03 2011] Spatial fit model total counts = 66.117100, observed total counts = 71.000000
[Sun Sep 25 11:08:03 2011] Offset between fit and detection position for source 3 = 0.015300 pixels
[Sun Sep 25 11:08:03 2011] 66.509450 total counts/ 5.151850 bgd. counts: snr = 27.032534
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.015300 pixels
  Position = (117.2, 562.2) = 21 56 41.45 -69 40 37.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 61.4 +/- 8.2
  Background counts = 5.2
  Rate = 0.001 +/- 0.0001
[Sun Sep 25 11:08:03 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:08:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:08:03 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:08:03 2011] Source does appear to be extended
[Sun Sep 25 11:08:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:08:40 2011] Not overwriting source region fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src3_src.reg
[Sun Sep 25 11:08:40 2011] Extracting stamp from image fullrun_ccd0_acisf11530_pi14-548_cl_sm2.00.img.gz, (97, 542) - (138, 583)
[Sun Sep 25 11:08:40 2011] Writing fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src3.gif
[Sun Sep 25 11:09:09 2011] ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src3_src.evt and ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Sep 25 11:09:09 2011] Size of ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src3_src.evt.gz[events] = 69 counts
[Sun Sep 25 11:09:09 2011] Mean chipx,y = (930.00, 946.57)
[Sun Sep 25 11:09:09 2011] Mean tdetx,y = (4007.57, 4202.00)
[Sun Sep 25 11:09:09 2011] chipx,y range = (913.00-950.00, 929.00-963.00)
[Sun Sep 25 11:09:09 2011] Size of ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 7 counts
[Sun Sep 25 11:09:09 2011] ../../acisf11530/products/images/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src3_src.img and ../../acisf11530/products/images/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Sep 25 11:09:09 2011] ../../acisf11530/products/spectra/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src3_src.pi and ../../acisf11530/products/spectra/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Sep 25 11:09:09 2011] Not generating rmf since there are only 61 counts
[Sun Sep 25 11:09:14 2011] ../../acisf11530/products/lightcurves/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src3_src.lc and ../../acisf11530/products/lightcurves/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Sep 25 11:11:04 2011] 193.241
[Sun Sep 25 11:14:37 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:14:37 2011] Error reading totcts from fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Sep 25 11:14:37 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:14:37 2011] Using photon index=1.80, rate=0.00108, arf fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src3.arf
[Sun Sep 25 11:14:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:14:37 2011] Updating source flux to 1.3e-14
[Sun Sep 25 11:14:43 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting