[Sun Sep 25 11:05:40 2011] Detection parameters:
  Position = (529.1, 340.3) = 21 56 2.43 -69 42 26.4
  Extent = 1.1" x 0.8", rotation angle = 9 degrees
  Source counts = 28.5 +/- 5.7
  Background counts = 3.5
  Rate = 0.0005 +/- 0.0001

[Sun Sep 25 11:05:42 2011] Off-axis axis estimate = 4.96'
[Sun Sep 25 11:07:03 2011] Using EEF radius (= 1.16 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:03 2011] Initial guess for spatial extent in simple fitting = 1.16"
[Sun Sep 25 11:07:03 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.095
[Sun Sep 25 11:07:03 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 1.16"
[Sun Sep 25 11:07:04 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src13.ximg exists
[Sun Sep 25 11:07:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src13.csv
[Sun Sep 25 11:07:04 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src13_1.ximg exists
[Sun Sep 25 11:07:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src13.csv
[Sun Sep 25 11:07:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:04 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sun Sep 25 11:07:04 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Sep 25 11:07:04 2011] Fit fullrun_ccd0_acisf11530_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Sep 25 11:07:17 2011] Spatial fit model total counts = 36.908400, observed total counts = 37.000000
[Sun Sep 25 11:07:17 2011] Offset between fit and detection position for source 16 = 0.226804 pixels
[Sun Sep 25 11:07:17 2011] 37.798100 total counts/ 14.251200 bgd. counts: snr = 6.237464
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.226804 pixels
  Position = (529.1, 340.6) = 21 56 2.47 -69 42 26.5
  Extent = 1.0 (0.7-1.5)", rotation angle = 0
  Source counts = 23.5 +/- 6.1
  Background counts = 14.3
  Rate = 0.0004 +/- 0.0001
[Sun Sep 25 11:07:17 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:07:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:07:17 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:07:17 2011] Source does appear to be extended
[Sun Sep 25 11:07:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:07:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:50 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Sun Sep 25 11:07:50 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.941
[Sun Sep 25 11:07:50 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 1.02"
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src12.ximg exists
[Sun Sep 25 11:07:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src12.csv
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src12_1.ximg exists
[Sun Sep 25 11:07:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src12.csv
[Sun Sep 25 11:07:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Sep 25 11:07:51 2011] Fit fullrun_ccd0_acisf11530_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Sep 25 11:08:03 2011] Spatial fit model total counts = 36.998700, observed total counts = 37.000000
[Sun Sep 25 11:08:03 2011] Offset between fit and detection position for source 16 = 0.026568 pixels
[Sun Sep 25 11:08:03 2011] 37.880500 total counts/ 14.005700 bgd. counts: snr = 6.379510
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.026568 pixels
  Position = (529.2, 340.5) = 21 56 2.47 -69 42 26.5
  Extent = 1.0 (0.7-1.5)", rotation angle = 0
  Source counts = 23.9 +/- 6.2
  Background counts = 14.0
  Rate = 0.0004 +/- 0.0001
[Sun Sep 25 11:08:03 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:08:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:08:03 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:08:03 2011] Source does appear to be extended
[Sun Sep 25 11:08:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:08:44 2011] Not overwriting source region fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src16_src.reg
[Sun Sep 25 11:08:44 2011] Extracting stamp from image fullrun_ccd0_acisf11530_pi14-548_cl_sm2.00.img.gz, (481, 293) - (577, 388)
[Sun Sep 25 11:08:44 2011] Writing fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src16.gif
[Sun Sep 25 11:10:00 2011] ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src16_src.evt and ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Sun Sep 25 11:10:00 2011] Size of ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src16_src.evt.gz[events] = 34 counts
[Sun Sep 25 11:10:00 2011] Mean chipx,y = (906.06, 480.24)
[Sun Sep 25 11:10:00 2011] Mean tdetx,y = (3541.24, 4225.94)
[Sun Sep 25 11:10:00 2011] chipx,y range = (882.00-926.00, 459.00-496.00)
[Sun Sep 25 11:10:00 2011] Size of ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 66 counts
[Sun Sep 25 11:10:00 2011] ../../acisf11530/products/images/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src16_src.img and ../../acisf11530/products/images/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Sun Sep 25 11:10:00 2011] ../../acisf11530/products/spectra/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src16_src.pi and ../../acisf11530/products/spectra/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Sun Sep 25 11:10:00 2011] Not generating rmf since there are only 23 counts
[Sun Sep 25 11:10:03 2011] ../../acisf11530/products/lightcurves/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src16_src.lc and ../../acisf11530/products/lightcurves/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Sun Sep 25 11:11:04 2011] 185.611
[Sun Sep 25 11:14:37 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:14:37 2011] Error reading totcts from fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src16_src.pi.gz
[Sun Sep 25 11:14:38 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:14:38 2011] Using photon index=1.80, rate=0.000421, arf fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src16.arf
[Sun Sep 25 11:14:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:14:38 2011] Updating source flux to 5.3e-15
[Sun Sep 25 11:14:43 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting