[Sun Sep 25 11:05:40 2011] Detection parameters:
  Position = (349.8, 675.8) = 21 56 19.48 -69 39 41.6
  Extent = 0.7" x 0.5", rotation angle = 105 degrees
  Source counts = 14.1 +/- 4.0
  Background counts = 1.9
  Rate = 0.0002 +/- 7e-05

[Sun Sep 25 11:05:42 2011] Off-axis axis estimate = 3.88'
[Sun Sep 25 11:07:03 2011] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:03 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Sun Sep 25 11:07:03 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.892
[Sun Sep 25 11:07:03 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.80"
[Sun Sep 25 11:07:04 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src10.ximg exists
[Sun Sep 25 11:07:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src10.csv
[Sun Sep 25 11:07:04 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src10_1.ximg exists
[Sun Sep 25 11:07:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src10.csv
[Sun Sep 25 11:07:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:04 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sun Sep 25 11:07:04 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Sep 25 11:07:04 2011] Fit fullrun_ccd0_acisf11530_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Sep 25 11:07:17 2011] Spatial fit model total counts = 18.096800, observed total counts = 19.000000
[Sun Sep 25 11:07:17 2011] Offset between fit and detection position for source 12 = 0.843068 pixels
[Sun Sep 25 11:07:17 2011] 17.594080 total counts/ 3.784980 bgd. counts: snr = 7.097961
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.843068 pixels
  Position = (350.6, 675.9) = 21 56 19.45 -69 39 41.8
  Extent = 0.6 (0.5-1.0)", rotation angle = 0
  Source counts = 13.8 +/- 4.2
  Background counts = 3.8
  Rate = 0.0002 +/- 7e-05
[Sun Sep 25 11:07:17 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:07:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:07:17 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:07:17 2011] Source does appear to be extended
[Sun Sep 25 11:07:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:07:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:50 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Sun Sep 25 11:07:50 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.936
[Sun Sep 25 11:07:50 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.63"
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src9.ximg exists
[Sun Sep 25 11:07:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src9.csv
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Sep 25 11:07:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src9.csv
[Sun Sep 25 11:07:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Sep 25 11:07:51 2011] Fit fullrun_ccd0_acisf11530_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Sep 25 11:08:03 2011] Spatial fit model total counts = 19.998500, observed total counts = 20.000000
[Sun Sep 25 11:08:03 2011] Offset between fit and detection position for source 12 = 0.026180 pixels
[Sun Sep 25 11:08:03 2011] 20.021820 total counts/ 6.951420 bgd. counts: snr = 4.957379
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.026180 pixels
  Position = (350.6, 675.9) = 21 56 19.44 -69 39 41.8
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 13.1 +/- 4.5
  Background counts = 7.0
  Rate = 0.0002 +/- 8e-05
[Sun Sep 25 11:08:03 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:08:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:08:03 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:08:03 2011] Source does appear to be extended
[Sun Sep 25 11:08:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:08:43 2011] Not overwriting source region fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src12_src.reg
[Sun Sep 25 11:08:43 2011] Extracting stamp from image fullrun_ccd0_acisf11530_pi14-548_cl_sm2.00.img.gz, (323, 649) - (378, 703)
[Sun Sep 25 11:08:43 2011] Writing fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src12.gif
[Sun Sep 25 11:09:43 2011] ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src12_src.evt and ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sun Sep 25 11:09:43 2011] Size of ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src12_src.evt.gz[events] = 14 counts
[Sun Sep 25 11:09:43 2011] Mean chipx,y = (709.00, 799.36)
[Sun Sep 25 11:09:43 2011] Mean tdetx,y = (3860.36, 4423.00)
[Sun Sep 25 11:09:43 2011] chipx,y range = (694.00-725.00, 790.00-820.00)
[Sun Sep 25 11:09:43 2011] Size of ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 20 counts
[Sun Sep 25 11:09:43 2011] ../../acisf11530/products/images/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src12_src.img and ../../acisf11530/products/images/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Sun Sep 25 11:09:43 2011] ../../acisf11530/products/spectra/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src12_src.pi and ../../acisf11530/products/spectra/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Sun Sep 25 11:09:43 2011] Not generating rmf since there are only 13 counts
[Sun Sep 25 11:09:47 2011] ../../acisf11530/products/lightcurves/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src12_src.lc and ../../acisf11530/products/lightcurves/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sun Sep 25 11:11:04 2011] 192.647
[Sun Sep 25 11:14:37 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:14:37 2011] Error reading totcts from fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src12_src.pi.gz
[Sun Sep 25 11:14:37 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:14:37 2011] Using photon index=1.80, rate=0.00023, arf fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src12.arf
[Sun Sep 25 11:14:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:14:37 2011] Updating source flux to 2.8e-15
[Sun Sep 25 11:14:43 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting