[Sun Sep 25 11:05:40 2011] Detection parameters:
  Position = (413.7, 550.2) = 21 56 13.40 -69 40 43.3
  Extent = 0.6" x 0.5", rotation angle = 16 degrees
  Source counts = 50.1 +/- 7.3
  Background counts = 2.9
  Rate = 0.0009 +/- 0.0001

[Sun Sep 25 11:05:42 2011] Off-axis axis estimate = 4.02'
[Sun Sep 25 11:07:03 2011] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:03 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Sun Sep 25 11:07:03 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.827
[Sun Sep 25 11:07:03 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.84"
[Sun Sep 25 11:07:03 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src9.ximg exists
[Sun Sep 25 11:07:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src9.csv
[Sun Sep 25 11:07:04 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src9_1.ximg exists
[Sun Sep 25 11:07:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src9.csv
[Sun Sep 25 11:07:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11530_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:04 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun Sep 25 11:07:04 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Sep 25 11:07:04 2011] Fit fullrun_ccd0_acisf11530_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Sep 25 11:07:17 2011] Spatial fit model total counts = 58.999300, observed total counts = 59.000000
[Sun Sep 25 11:07:17 2011] Offset between fit and detection position for source 10 = 0.660770 pixels
[Sun Sep 25 11:07:17 2011] 59.248600 total counts/ 10.717500 bgd. counts: snr = 14.824272
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.660770 pixels
  Position = (414.1, 550.7) = 21 56 13.42 -69 40 43.3
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 48.5 +/- 7.7
  Background counts = 10.7
  Rate = 0.0009 +/- 0.0001
[Sun Sep 25 11:07:17 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:07:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:07:17 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:07:17 2011] Source does appear to be extended
[Sun Sep 25 11:07:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:07:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:07:50 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Sun Sep 25 11:07:50 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.100
[Sun Sep 25 11:07:50 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.69"
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src8.ximg exists
[Sun Sep 25 11:07:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src8.csv
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src8_1.ximg exists
[Sun Sep 25 11:07:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src8.csv
[Sun Sep 25 11:07:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11530_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Sun Sep 25 11:07:51 2011] fullrun_ccd0_acisf11530_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Sep 25 11:07:51 2011] Fit fullrun_ccd0_acisf11530_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Sep 25 11:08:03 2011] Spatial fit model total counts = 58.999300, observed total counts = 59.000000
[Sun Sep 25 11:08:03 2011] Offset between fit and detection position for source 10 = 0.018769 pixels
[Sun Sep 25 11:08:03 2011] 58.857500 total counts/ 10.130900 bgd. counts: snr = 15.308833
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.018769 pixels
  Position = (414.1, 550.7) = 21 56 13.42 -69 40 43.3
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 48.7 +/- 7.7
  Background counts = 10.1
  Rate = 0.0009 +/- 0.0001
[Sun Sep 25 11:08:03 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:08:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:08:03 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:08:03 2011] Source does appear to be extended
[Sun Sep 25 11:08:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:08:43 2011] Not overwriting source region fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src10_src.reg
[Sun Sep 25 11:08:43 2011] Extracting stamp from image fullrun_ccd0_acisf11530_pi14-548_cl_sm2.00.img.gz, (383, 519) - (446, 582)
[Sun Sep 25 11:08:43 2011] Writing fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src10.gif
[Sun Sep 25 11:09:36 2011] ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src10_src.evt and ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun Sep 25 11:09:36 2011] Size of ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src10_src.evt.gz[events] = 53 counts
[Sun Sep 25 11:09:36 2011] Mean chipx,y = (788.79, 688.40)
[Sun Sep 25 11:09:36 2011] Mean tdetx,y = (3749.40, 4343.21)
[Sun Sep 25 11:09:36 2011] chipx,y range = (770.00-806.00, 666.00-703.00)
[Sun Sep 25 11:09:36 2011] Size of ../../acisf11530/products/events/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 34 counts
[Sun Sep 25 11:09:36 2011] ../../acisf11530/products/images/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src10_src.img and ../../acisf11530/products/images/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun Sep 25 11:09:36 2011] ../../acisf11530/products/spectra/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src10_src.pi and ../../acisf11530/products/spectra/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sun Sep 25 11:09:36 2011] Not generating rmf since there are only 48 counts
[Sun Sep 25 11:09:40 2011] ../../acisf11530/products/lightcurves/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src10_src.lc and ../../acisf11530/products/lightcurves/fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun Sep 25 11:11:04 2011] 189.865
[Sun Sep 25 11:14:37 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:14:37 2011] Error reading totcts from fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src10_src.pi.gz
[Sun Sep 25 11:14:37 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:14:37 2011] Using photon index=1.80, rate=0.000859, arf fullrun_ccd0_acisf11530_pi14-548_pass1_cl_src10.arf
[Sun Sep 25 11:14:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:14:37 2011] Updating source flux to 1.1e-14
[Sun Sep 25 11:14:43 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting