[Wed Oct 19 07:59:20 2011] Detection parameters:
  Position = (548.5, 237.2) = 12 30 48.62 12 23 32.6
  Extent = 0.6" x 0.5", rotation angle = 22 degrees
  Source counts = 1122.6 +/- 37.7
  Background counts = 301.4
  Rate = 0.2 +/- 0.008

[Wed Oct 19 07:59:20 2011] Off-axis axis estimate = 0.34'
[Wed Oct 19 07:59:34 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 07:59:34 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Oct 19 07:59:34 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.865
[Wed Oct 19 07:59:34 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.40"
[Wed Oct 19 07:59:35 2011] fullrun_ccd7_acisf11520_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct 19 07:59:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11520_pi14-548_cl_pass0_src3.csv
[Wed Oct 19 07:59:35 2011] fullrun_ccd7_acisf11520_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct 19 07:59:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11520_pi14-548_cl_pass0_src3.csv
[Wed Oct 19 07:59:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11520_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11520_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 07:59:35 2011] fullrun_ccd7_acisf11520_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct 19 07:59:35 2011] fullrun_ccd7_acisf11520_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct 19 07:59:35 2011] Fit fullrun_ccd7_acisf11520_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct 19 07:59:37 2011] Spatial fit model total counts = 1177.380000, observed total counts = 1176.000000
[Wed Oct 19 07:59:37 2011] Offset between fit and detection position for source 3 = 4.258263 pixels
[Wed Oct 19 07:59:37 2011] Warning, changing simple spatial fit ID from 3 to 2
[Wed Oct 19 07:59:37 2011] 1170.183000 total counts/ 885.656000 bgd. counts: snr = 9.560728
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.258263 pixels
  Position = (544.3, 237.1) = 12 30 48.78 12 23 32.3
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 284.5 +/- 34.2
  Background counts = 885.7
  Rate = 0.06 +/- 0.007
[Wed Oct 19 07:59:37 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 07:59:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 07:59:37 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 07:59:37 2011] Source does appear to be extended
[Wed Oct 19 07:59:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 07:59:37 2011] Source is confused with source 2
[Wed Oct 19 07:59:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 07:59:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 07:59:40 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Wed Oct 19 07:59:40 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Wed Oct 19 07:59:40 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.50"
[Wed Oct 19 07:59:40 2011] fullrun_ccd7_acisf11520_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct 19 07:59:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11520_pi14-548_cl_pass1_src3.csv
[Wed Oct 19 07:59:40 2011] fullrun_ccd7_acisf11520_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct 19 07:59:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11520_pi14-548_cl_pass1_src3.csv
[Wed Oct 19 07:59:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11520_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11520_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 07:59:40 2011] fullrun_ccd7_acisf11520_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct 19 07:59:40 2011] fullrun_ccd7_acisf11520_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct 19 07:59:40 2011] Fit fullrun_ccd7_acisf11520_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct 19 07:59:42 2011] Spatial fit model total counts = 1173.580000, observed total counts = 1176.000000
[Wed Oct 19 07:59:42 2011] Offset between fit and detection position for source 3 = 0.021850 pixels
[Wed Oct 19 07:59:42 2011] Warning, changing simple spatial fit ID from 3 to 2
[Wed Oct 19 07:59:42 2011] 1168.106000 total counts/ 892.671000 bgd. counts: snr = 9.218779
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.021850 pixels
  Position = (544.3, 237.1) = 12 30 48.78 12 23 32.3
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 275.4 +/- 34.2
  Background counts = 892.7
  Rate = 0.06 +/- 0.007
[Wed Oct 19 07:59:42 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 07:59:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 07:59:42 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 07:59:42 2011] Source does appear to be extended
[Wed Oct 19 07:59:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 07:59:45 2011] Not overwriting source region fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3_src.reg
[Wed Oct 19 07:59:45 2011] Extracting stamp from image fullrun_ccd7_acisf11520_pi14-548_cl_sm2.00.img.gz, (476, 168) - (613, 306)
[Wed Oct 19 07:59:45 2011] Writing fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3.gif
[Wed Oct 19 08:00:12 2011] ../../acisf11520/products/events/fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3_src.evt and ../../acisf11520/products/events/fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Oct 19 08:00:13 2011] Size of ../../acisf11520/products/events/fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3_src.evt.gz[events] = 2164 counts
[Wed Oct 19 08:00:13 2011] Mean chipx,y = (218.04, 529.20)
[Wed Oct 19 08:00:13 2011] Mean tdetx,y = (4135.04, 2231.20)
[Wed Oct 19 08:00:13 2011] chipx,y range = (192.00-246.00, 500.00-556.00)
[Wed Oct 19 08:00:13 2011] Size of ../../acisf11520/products/events/fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 7684 counts
[Wed Oct 19 08:00:13 2011] ../../acisf11520/products/images/fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3_src.img and ../../acisf11520/products/images/fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Oct 19 08:00:13 2011] rmf not found, will run specextract
[Wed Oct 19 08:00:13 2011] arf not found, will run specextract
[Wed Oct 19 08:00:20 2011] ../../acisf11520/products/spectra/fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3.warf not found
[Wed Oct 19 08:00:20 2011] ../../acisf11520/products/spectra/fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3.wrmf not found
[Wed Oct 19 08:00:20 2011] Removal of ../../acisf11520/products/spectra/fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3.soff failed
[Wed Oct 19 08:00:26 2011] ../../acisf11520/products/lightcurves/fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3_src.lc and ../../acisf11520/products/lightcurves/fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Oct 19 08:01:07 2011] Keeping rmf generated by specextract
[Wed Oct 19 08:01:07 2011] 235.705
[Wed Oct 19 08:01:08 2011] Updating aperture counts using extracted products
[Wed Oct 19 08:01:08 2011] Error reading totcts from fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Oct 19 08:01:08 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 08:01:08 2011] Using photon index=1.80, rate=0.0599, arf fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3.arf
[Wed Oct 19 08:01:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 08:01:08 2011] Updating source flux to 4.5e-13
[Wed Oct 19 08:01:08 2011] Flag c found in src. 3 procflags, skipping spectral fitting
[Wed Oct 19 08:01:15 2011] Reading fit data from acisf11520/analysis//spectral/fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3_pl.csv
[Wed Oct 19 08:01:15 2011] Spectral fit parameter nH value = 6.92046e+17
[Wed Oct 19 08:01:15 2011] Spectral fit parameter PhoIndex value = 2.35227
[Wed Oct 19 08:01:15 2011] Failed to get F(0.3-8.0) from acisf11520/analysis//spectral/fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Oct 19 08:01:15 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 08:01:15 2011] Using Nh = 6.9e+17, photon index=2.35, rate=0.0599, arf fullrun_ccd7_acisf11520_pi14-548_pass1_cl_src3.arf
[Wed Oct 19 08:01:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 08:01:15 2011] Updating source flux to 4e-13