[Sun Oct 2 10:40:28 2011] Detection parameters: Position = (655.3, 212.8) = 12 30 49.05 12 23 30.1 Extent = 0.5" x 0.5", rotation angle = 3 degrees Source counts = 197.5 +/- 17.1 Background counts = 93.5 Rate = 0.04 +/- 0.004 [Sun Oct 2 10:40:28 2011] Off-axis axis estimate = 0.29' [Sun Oct 2 10:40:44 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting [Sun Oct 2 10:40:44 2011] Initial guess for spatial extent in simple fitting = 0.40" [Sun Oct 2 10:40:44 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.285 [Sun Oct 2 10:40:44 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.40" [Sun Oct 2 10:40:47 2011] fullrun_ccd7_acisf11516_pi14-548_cl_pass0_src1.ximg exists [Sun Oct 2 10:40:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11516_pi14-548_cl_pass0_src1.csv [Sun Oct 2 10:40:47 2011] fullrun_ccd7_acisf11516_pi14-548_cl_pass0_src1_1.ximg exists [Sun Oct 2 10:40:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11516_pi14-548_cl_pass0_src1.csv [Sun Oct 2 10:40:47 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf11516_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf11516_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Oct 2 10:40:47 2011] fullrun_ccd7_acisf11516_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Sun Oct 2 10:40:47 2011] fullrun_ccd7_acisf11516_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Sun Oct 2 10:40:47 2011] Fit fullrun_ccd7_acisf11516_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Sun Oct 2 10:40:50 2011] Spatial fit model total counts = 1728.600000, observed total counts = 1724.000000 [Sun Oct 2 10:40:50 2011] Offset between fit and detection position for source 1 = 3.820747 pixels [Sun Oct 2 10:40:50 2011] 1667.419000 total counts/ 866.270000 bgd. counts: snr = 27.219908 Spatial fit parameters: Offset between fit and detection position for source 1 = 3.820747 pixels Position = (651.7, 211.6) = 12 30 49.18 12 23 29.2 Extent = 1.3 (1.2-1.4)", rotation angle = 0 Source counts = 801.1 +/- 40.8 Background counts = 866.3 Rate = 0.2 +/- 0.009 [Sun Oct 2 10:40:50 2011] Vigneting correction estimate = 1.000000 [Sun Oct 2 10:40:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Oct 2 10:40:50 2011] Assessing source extent using major axis lower bound [Sun Oct 2 10:40:50 2011] Source does appear to be extended [Sun Oct 2 10:40:50 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Oct 2 10:40:50 2011] Source is confused with source 2 [Sun Oct 2 10:40:50 2011] Source is confused with source 10 [Sun Oct 2 10:40:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Oct 2 10:40:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Oct 2 10:40:53 2011] Initial guess for spatial extent in simple fitting = 1.33" [Sun Oct 2 10:40:53 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.023 [Sun Oct 2 10:40:53 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.33" [Sun Oct 2 10:40:53 2011] fullrun_ccd7_acisf11516_pi14-548_cl_pass1_src1.ximg exists [Sun Oct 2 10:40:53 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11516_pi14-548_cl_pass1_src1.csv [Sun Oct 2 10:40:53 2011] fullrun_ccd7_acisf11516_pi14-548_cl_pass1_src1_1.ximg exists [Sun Oct 2 10:40:53 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11516_pi14-548_cl_pass1_src1.csv [Sun Oct 2 10:40:53 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf11516_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf11516_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Oct 2 10:40:53 2011] fullrun_ccd7_acisf11516_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Sun Oct 2 10:40:53 2011] fullrun_ccd7_acisf11516_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Sun Oct 2 10:40:53 2011] Fit fullrun_ccd7_acisf11516_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Sun Oct 2 10:40:54 2011] Warning, spatial fit 1 centroid is now closest to src. 10 [Sun Oct 2 10:40:54 2011] Source 1 is offset by 2.078598 and 0.153374 pixels which is larger than 2 X fitted extent = 1.964142 x 1.964142, not incorporating fit results [Sun Oct 2 10:40:54 2011] Vigneting correction estimate = 1.000000 [Sun Oct 2 10:40:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Oct 2 10:40:54 2011] Assessing source extent using major axis lower bound [Sun Oct 2 10:40:54 2011] Source does appear to be extended [Sun Oct 2 10:40:54 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Oct 2 10:40:59 2011] Not overwriting source region fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1_src.reg [Sun Oct 2 10:40:59 2011] Extracting stamp from image fullrun_ccd7_acisf11516_pi14-548_cl_sm2.00.img.gz, (591, 151) - (713, 272) [Sun Oct 2 10:40:59 2011] Writing fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1.gif [Sun Oct 2 10:41:00 2011] ../../acisf11516/products/events/fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1_src.evt and ../../acisf11516/products/events/fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create [Sun Oct 2 10:41:00 2011] Size of ../../acisf11516/products/events/fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1_src.evt.gz[events] = 4795 counts [Sun Oct 2 10:41:00 2011] Mean chipx,y = (221.22, 510.74) [Sun Oct 2 10:41:00 2011] Mean tdetx,y = (4138.22, 2212.74) [Sun Oct 2 10:41:00 2011] chipx,y range = (193.00-246.00, 487.00-540.00) [Sun Oct 2 10:41:00 2011] Size of ../../acisf11516/products/events/fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 6276 counts [Sun Oct 2 10:41:00 2011] ../../acisf11516/products/images/fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1_src.img and ../../acisf11516/products/images/fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create [Sun Oct 2 10:41:00 2011] ../../acisf11516/products/spectra/fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1_src.pi and ../../acisf11516/products/spectra/fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create [Sun Oct 2 10:41:03 2011] ../../acisf11516/products/lightcurves/fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1_src.lc and ../../acisf11516/products/lightcurves/fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create [Sun Oct 2 10:41:18 2011] Keeping rmf generated by specextract [Sun Oct 2 10:41:18 2011] 235.77 [Sun Oct 2 10:41:18 2011] Updating aperture counts using extracted products [Sun Oct 2 10:41:18 2011] Error reading totcts from fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1_src.pi.gz [Sun Oct 2 10:41:18 2011] Calculating source flux in energy range 0.30-8.00 [Sun Oct 2 10:41:18 2011] Using photon index=1.80, rate=0.17, arf fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1.arf [Sun Oct 2 10:41:18 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sun Oct 2 10:41:18 2011] Updating source flux to 1.3e-12 [Sun Oct 2 10:41:19 2011] Flag b found in src. 1 procflags, skipping spectral fitting [Sun Oct 2 10:41:19 2011] Flag c found in src. 1 procflags, skipping spectral fitting [Sun Oct 2 10:41:33 2011] Reading fit data from acisf11516/analysis//spectral/fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1_pl.csv [Sun Oct 2 10:41:33 2011] Spectral fit parameter nH value = 9.86674e+19 [Sun Oct 2 10:41:33 2011] Spectral fit parameter PhoIndex value = 2.13616 [Sun Oct 2 10:41:33 2011] Failed to get F(0.3-8.0) from acisf11516/analysis//spectral/fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Sun Oct 2 10:41:33 2011] Calculating source flux in energy range 0.30-8.00 [Sun Oct 2 10:41:33 2011] Using Nh = 9.9e+19, photon index=2.14, rate=0.17, arf fullrun_ccd7_acisf11516_pi14-548_pass1_cl_src1.arf [Sun Oct 2 10:41:33 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sun Oct 2 10:41:33 2011] Updating source flux to 1.1e-12