[Mon Oct 24 23:38:19 2011] Detection parameters:
  Position = (675.5, 214.1) = 12 30 49.03 12 23 30.3
  Extent = 0.5" x 0.5", rotation angle = 9 degrees
  Source counts = 125.1 +/- 13.9
  Background counts = 67.9
  Rate = 0.03 +/- 0.003

[Mon Oct 24 23:38:20 2011] Off-axis axis estimate = 0.30'
[Mon Oct 24 23:38:34 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 23:38:34 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Oct 24 23:38:34 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.858
[Mon Oct 24 23:38:34 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.40"
[Mon Oct 24 23:38:34 2011] fullrun_ccd7_acisf11515_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 23:38:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11515_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 23:38:34 2011] fullrun_ccd7_acisf11515_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 23:38:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11515_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 23:38:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11515_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11515_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 23:38:34 2011] fullrun_ccd7_acisf11515_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 23:38:35 2011] fullrun_ccd7_acisf11515_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 23:38:35 2011] Fit fullrun_ccd7_acisf11515_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 23:38:36 2011] Spatial fit model total counts = 1591.800000, observed total counts = 1573.000000
[Mon Oct 24 23:38:36 2011] Offset between fit and detection position for source 1 = 4.241148 pixels
[Mon Oct 24 23:38:36 2011] 1470.913000 total counts/ 837.543000 bgd. counts: snr = 21.885372
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.241148 pixels
  Position = (671.7, 212.1) = 12 30 49.18 12 23 29.1
  Extent = 1.2 (1.1-1.4)", rotation angle = 0
  Source counts = 633.4 +/- 38.4
  Background counts = 837.5
  Rate = 0.1 +/- 0.008
[Mon Oct 24 23:38:36 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 23:38:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 23:38:36 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 23:38:36 2011] Source does appear to be extended
[Mon Oct 24 23:38:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 23:38:36 2011] Source is confused with source 2
[Mon Oct 24 23:38:36 2011] Source is confused with source 8
[Mon Oct 24 23:38:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 23:38:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 23:38:39 2011] Initial guess for spatial extent in simple fitting = 1.23"
[Mon Oct 24 23:38:39 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.999
[Mon Oct 24 23:38:39 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.23"
[Mon Oct 24 23:38:39 2011] fullrun_ccd7_acisf11515_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 23:38:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11515_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 23:38:39 2011] fullrun_ccd7_acisf11515_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 23:38:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11515_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 23:38:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11515_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11515_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 23:38:39 2011] fullrun_ccd7_acisf11515_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 23:38:40 2011] fullrun_ccd7_acisf11515_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 23:38:40 2011] Fit fullrun_ccd7_acisf11515_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 23:38:41 2011] Warning, spatial fit 1 centroid is now closest to src. 8
[Mon Oct 24 23:38:41 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 23:38:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 23:38:41 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 23:38:41 2011] Source does appear to be extended
[Mon Oct 24 23:38:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 23:38:44 2011] Not overwriting source region fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 24 23:38:44 2011] Extracting stamp from image fullrun_ccd7_acisf11515_pi14-548_cl_sm2.00.img.gz, (615, 156) - (728, 268)
[Mon Oct 24 23:38:44 2011] Writing fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1.gif
[Mon Oct 24 23:38:45 2011] ../../acisf11515/products/events/fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1_src.evt and ../../acisf11515/products/events/fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 24 23:38:45 2011] Size of ../../acisf11515/products/events/fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1_src.evt.gz[events] = 4812 counts
[Mon Oct 24 23:38:45 2011] Mean chipx,y = (228.75, 513.36)
[Mon Oct 24 23:38:45 2011] Mean tdetx,y = (4145.75, 2215.36)
[Mon Oct 24 23:38:45 2011] chipx,y range = (200.00-262.00, 492.00-548.00)
[Mon Oct 24 23:38:45 2011] Size of ../../acisf11515/products/events/fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 4835 counts
[Mon Oct 24 23:38:45 2011] ../../acisf11515/products/images/fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1_src.img and ../../acisf11515/products/images/fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 24 23:38:45 2011] rmf not found, will run specextract
[Mon Oct 24 23:38:45 2011] arf not found, will run specextract
[Mon Oct 24 23:38:53 2011] ../../acisf11515/products/spectra/fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1.warf not found
[Mon Oct 24 23:38:53 2011] ../../acisf11515/products/spectra/fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1.wrmf not found
[Mon Oct 24 23:38:53 2011] Removal of ../../acisf11515/products/spectra/fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1.soff failed
[Mon Oct 24 23:38:59 2011] ../../acisf11515/products/lightcurves/fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1_src.lc and ../../acisf11515/products/lightcurves/fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 24 23:39:52 2011] Keeping rmf generated by specextract
[Mon Oct 24 23:39:52 2011] 235.219
[Mon Oct 24 23:39:53 2011] Updating aperture counts using extracted products
[Mon Oct 24 23:39:53 2011] Error reading totcts from fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 24 23:39:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 23:39:53 2011] Using photon index=1.80, rate=0.135, arf fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1.arf
[Mon Oct 24 23:39:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 23:39:53 2011] Updating source flux to 1e-12
[Mon Oct 24 23:39:53 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Oct 24 23:40:15 2011] Reading fit data from acisf11515/analysis//spectral/fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 24 23:40:15 2011] Spectral fit parameter nH value = 7.2925e+14
[Mon Oct 24 23:40:15 2011] Spectral fit parameter PhoIndex value = 2.14002
[Mon Oct 24 23:40:15 2011] Failed to get F(0.3-8.0) from acisf11515/analysis//spectral/fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 24 23:40:15 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 23:40:15 2011] Using Nh = 7.3e+14, photon index=2.14, rate=0.135, arf fullrun_ccd7_acisf11515_pi14-548_pass1_cl_src1.arf
[Mon Oct 24 23:40:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 23:40:15 2011] Updating source flux to 9.2e-13