[Fri Sep 23 21:04:31 2011] Detection parameters: Position = (746.2, 213.8) = 12 30 47.71 12 23 35.1 Extent = 0.5" x 0.5", rotation angle = 90 degrees Source counts = 32.7 +/- 9.0 Background counts = 48.3 Rate = 0.007 +/- 0.002 [Fri Sep 23 21:04:32 2011] Off-axis axis estimate = 0.41' [Fri Sep 23 21:04:48 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting [Fri Sep 23 21:04:48 2011] Initial guess for spatial extent in simple fitting = 0.40" [Fri Sep 23 21:04:48 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.584 [Fri Sep 23 21:04:48 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.40" [Fri Sep 23 21:04:49 2011] fullrun_ccd7_acisf11514_pi14-548_cl_pass0_src6.ximg exists [Fri Sep 23 21:04:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11514_pi14-548_cl_pass0_src6.csv [Fri Sep 23 21:04:49 2011] fullrun_ccd7_acisf11514_pi14-548_cl_pass0_src6_1.ximg exists [Fri Sep 23 21:04:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11514_pi14-548_cl_pass0_src6.csv [Fri Sep 23 21:04:49 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf11514_pi14-548_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf11514_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Sep 23 21:04:49 2011] fullrun_ccd7_acisf11514_pi14-548_cl_pass0_tfrozen_src6.ximg exists [Fri Sep 23 21:04:49 2011] fullrun_ccd7_acisf11514_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists [Fri Sep 23 21:04:49 2011] Fit fullrun_ccd7_acisf11514_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly [Fri Sep 23 21:04:52 2011] Spatial fit model total counts = 321.089000, observed total counts = 321.000000 [Fri Sep 23 21:04:52 2011] Offset between fit and detection position for source 6 = 0.766013 pixels [Fri Sep 23 21:04:52 2011] 319.895600 total counts/ 292.468000 bgd. counts: snr = 1.603794 Spatial fit parameters: Offset between fit and detection position for source 6 = 0.766013 pixels Position = (746.4, 214.5) = 12 30 47.72 12 23 35.2 Extent = 0.3 (0.1-0.5)", rotation angle = 0 Source counts = 27.4 +/- 17.9 Background counts = 292.5 Rate = 0.006 +/- 0.004 Deleting source due to low Poisson probability