[Sat Oct 29 06:45:12 2011] Detection parameters: Position = (401.2, 396.1) = 12 30 59.61 12 25 10.6 Extent = 0.8" x 0.5", rotation angle = 59 degrees Source counts = 12.7 +/- 4.4 Background counts = 6.3 Rate = 0.003 +/- 0.0009 [Sat Oct 29 06:45:12 2011] Off-axis axis estimate = 3.34' [Sat Oct 29 06:45:27 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting [Sat Oct 29 06:45:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Oct 29 06:45:27 2011] Initial guess for spatial extent in simple fitting = 0.65" [Sat Oct 29 06:45:27 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.196 [Sat Oct 29 06:45:27 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.65" [Sat Oct 29 06:45:28 2011] fullrun_ccd7_acisf11513_pi14-548_cl_pass0_src8.ximg exists [Sat Oct 29 06:45:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11513_pi14-548_cl_pass0_src8.csv [Sat Oct 29 06:45:28 2011] fullrun_ccd7_acisf11513_pi14-548_cl_pass0_src8_1.ximg exists [Sat Oct 29 06:45:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11513_pi14-548_cl_pass0_src8.csv [Sat Oct 29 06:45:28 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf11513_pi14-548_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf11513_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 29 06:45:28 2011] fullrun_ccd7_acisf11513_pi14-548_cl_pass0_tfrozen_src8.ximg exists [Sat Oct 29 06:45:28 2011] fullrun_ccd7_acisf11513_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists [Sat Oct 29 06:45:28 2011] Fit fullrun_ccd7_acisf11513_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly [Sat Oct 29 06:45:30 2011] Spatial fit model total counts = 42.491700, observed total counts = 43.000000 [Sat Oct 29 06:45:30 2011] Offset between fit and detection position for source 8 = 0.785057 pixels [Sat Oct 29 06:45:30 2011] 43.557300 total counts/ 33.452800 bgd. counts: snr = 1.747023 Spatial fit parameters: Offset between fit and detection position for source 8 = 0.785057 pixels Position = (401.6, 396.8) = 12 30 59.62 12 25 10.7 Extent = 0.4 (0.2-0.7)", rotation angle = 0 Source counts = 10.1 +/- 6.6 Background counts = 33.5 Rate = 0.002 +/- 0.001 Deleting source due to low Poisson probability