[Thu Sep 22 09:24:54 2011] Detection parameters:
  Position = (550.9, 241.2) = 21 59 54.45 -0 21 50.1
  Extent = 0.5" x 0.5", rotation angle = 74 degrees
  Source counts = 147.5 +/- 12.2
  Background counts = 1.5
  Rate = 0.02 +/- 0.002

[Thu Sep 22 09:24:54 2011] Off-axis axis estimate = 0.29'
[Thu Sep 22 09:25:27 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 09:25:27 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Thu Sep 22 09:25:27 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.857
[Thu Sep 22 09:25:27 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.41"
[Thu Sep 22 09:25:27 2011] fullrun_ccd7_acisf11509_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 09:25:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11509_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 09:25:27 2011] fullrun_ccd7_acisf11509_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 09:25:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11509_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 09:25:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11509_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11509_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 09:25:27 2011] fullrun_ccd7_acisf11509_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 09:25:27 2011] fullrun_ccd7_acisf11509_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 09:25:27 2011] Fit fullrun_ccd7_acisf11509_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 09:25:31 2011] Spatial fit model total counts = 148.288000, observed total counts = 149.000000
[Thu Sep 22 09:25:31 2011] Offset between fit and detection position for source 3 = 0.702510 pixels
[Thu Sep 22 09:25:31 2011] 149.664700 total counts/ 15.698700 bgd. counts: snr = 33.811368
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.702510 pixels
  Position = (551.4, 241.7) = 21 59 54.45 -0 21 50.1
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 134.0 +/- 12.2
  Background counts = 15.7
  Rate = 0.02 +/- 0.002
[Thu Sep 22 09:25:31 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 09:25:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 09:25:31 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 09:25:31 2011] Source does appear to be extended
[Thu Sep 22 09:25:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 09:25:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 09:25:46 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Thu Sep 22 09:25:46 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.252
[Thu Sep 22 09:25:46 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.41"
[Thu Sep 22 09:25:46 2011] fullrun_ccd7_acisf11509_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 09:25:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11509_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 09:25:46 2011] fullrun_ccd7_acisf11509_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 09:25:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11509_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 09:25:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11509_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11509_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 09:25:46 2011] fullrun_ccd7_acisf11509_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 09:25:46 2011] fullrun_ccd7_acisf11509_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 09:25:46 2011] Fit fullrun_ccd7_acisf11509_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 09:25:49 2011] Spatial fit model total counts = 145.240000, observed total counts = 149.000000
[Thu Sep 22 09:25:49 2011] Offset between fit and detection position for source 3 = 0.002484 pixels
[Thu Sep 22 09:25:49 2011] 146.161400 total counts/ 14.920400 bgd. counts: snr = 33.976552
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.002484 pixels
  Position = (551.4, 241.7) = 21 59 54.45 -0 21 50.1
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 131.2 +/- 12.1
  Background counts = 14.9
  Rate = 0.02 +/- 0.002
[Thu Sep 22 09:25:49 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 09:25:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 09:25:49 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 09:25:49 2011] Source does appear to be extended
[Thu Sep 22 09:25:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 09:26:54 2011] Not overwriting source region fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3_src.reg
[Thu Sep 22 09:26:54 2011] Extracting stamp from image fullrun_ccd7_acisf11509_pi14-548_cl_sm2.00.img.gz, (532, 223) - (571, 261)
[Thu Sep 22 09:26:54 2011] Writing fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3.gif
[Thu Sep 22 09:26:55 2011] ../../acisf11509/products/events/fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3_src.evt and ../../acisf11509/products/events/fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Sep 22 09:26:55 2011] Size of ../../acisf11509/products/events/fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3_src.evt.gz[events] = 136 counts
[Thu Sep 22 09:26:55 2011] Mean chipx,y = (217.51, 522.12)
[Thu Sep 22 09:26:55 2011] Mean tdetx,y = (4134.51, 2224.12)
[Thu Sep 22 09:26:55 2011] chipx,y range = (198.00-233.00, 503.00-537.00)
[Thu Sep 22 09:26:55 2011] Size of ../../acisf11509/products/events/fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 6 counts
[Thu Sep 22 09:26:55 2011] ../../acisf11509/products/images/fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3_src.img and ../../acisf11509/products/images/fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Sep 22 09:26:55 2011] ../../acisf11509/products/spectra/fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3_src.pi and ../../acisf11509/products/spectra/fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Sep 22 09:26:58 2011] ../../acisf11509/products/lightcurves/fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3_src.lc and ../../acisf11509/products/lightcurves/fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Sep 22 09:27:22 2011] Keeping rmf generated by specextract
[Thu Sep 22 09:27:22 2011] 235.881
[Thu Sep 22 09:27:23 2011] Updating aperture counts using extracted products
[Thu Sep 22 09:27:23 2011] Error reading totcts from fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Sep 22 09:27:23 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 09:27:23 2011] Using photon index=1.80, rate=0.0169, arf fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3.arf
[Thu Sep 22 09:27:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 09:27:23 2011] Updating source flux to 1.3e-13
[Thu Sep 22 09:27:32 2011] Reading fit data from acisf11509/analysis//spectral/fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3_pl.csv
[Thu Sep 22 09:27:32 2011] Spectral fit parameter nH value = 6.79126e+20
[Thu Sep 22 09:27:32 2011] Spectral fit parameter PhoIndex value = 1.56832
[Thu Sep 22 09:27:32 2011] Failed to get F(0.3-8.0) from acisf11509/analysis//spectral/fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 09:27:32 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 09:27:32 2011] Using Nh = 6.8e+20, photon index=1.57, rate=0.0169, arf fullrun_ccd7_acisf11509_pi14-548_pass1_cl_src3.arf
[Thu Sep 22 09:27:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 09:27:32 2011] Updating source flux to 1.4e-13