[Wed Sep 28 07:10:59 2011] Detection parameters:
  Position = (632.4, 875.3) = 9 42 9.16 52 7 14.7
  Extent = 0.5" x 0.5", rotation angle = 36 degrees
  Source counts = 190.4 +/- 13.8
  Background counts = 0.6
  Rate = 0.03 +/- 0.002

[Wed Sep 28 07:11:00 2011] Off-axis axis estimate = 0.30'
[Wed Sep 28 07:11:38 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 07:11:38 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Sep 28 07:11:38 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.287
[Wed Sep 28 07:11:38 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.40"
[Wed Sep 28 07:11:38 2011] fullrun_ccd7_acisf11508_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 28 07:11:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11508_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 07:11:38 2011] fullrun_ccd7_acisf11508_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 28 07:11:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11508_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 07:11:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11508_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11508_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 07:11:38 2011] fullrun_ccd7_acisf11508_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 07:11:38 2011] fullrun_ccd7_acisf11508_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 07:11:38 2011] Fit fullrun_ccd7_acisf11508_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 07:11:44 2011] Spatial fit model total counts = 194.000000, observed total counts = 194.000000
[Wed Sep 28 07:11:44 2011] Offset between fit and detection position for source 3 = 0.749118 pixels
[Wed Sep 28 07:11:44 2011] 193.895730 total counts/ 8.984730 bgd. counts: snr = 61.689355
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.749118 pixels
  Position = (633.0, 875.8) = 9 42 9.16 52 7 14.7
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 184.9 +/- 13.9
  Background counts = 9.0
  Rate = 0.03 +/- 0.002
[Wed Sep 28 07:11:44 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 07:11:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 07:11:44 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 07:11:44 2011] Source does appear to be extended
[Wed Sep 28 07:11:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 07:11:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 07:11:58 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Wed Sep 28 07:11:58 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.821
[Wed Sep 28 07:11:58 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.42"
[Wed Sep 28 07:11:58 2011] fullrun_ccd7_acisf11508_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 28 07:11:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11508_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 07:11:59 2011] fullrun_ccd7_acisf11508_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 28 07:11:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11508_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 07:11:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11508_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11508_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 07:12:00 2011] fullrun_ccd7_acisf11508_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 07:12:00 2011] fullrun_ccd7_acisf11508_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 07:12:00 2011] Fit fullrun_ccd7_acisf11508_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 07:12:06 2011] Spatial fit model total counts = 193.892000, observed total counts = 194.000000
[Wed Sep 28 07:12:06 2011] Offset between fit and detection position for source 3 = 0.009188 pixels
[Wed Sep 28 07:12:06 2011] 193.092210 total counts/ 7.844210 bgd. counts: snr = 66.142244
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.009188 pixels
  Position = (633.0, 875.8) = 9 42 9.16 52 7 14.7
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 185.2 +/- 13.9
  Background counts = 7.8
  Rate = 0.03 +/- 0.002
[Wed Sep 28 07:12:06 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 07:12:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 07:12:06 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 07:12:06 2011] Source does appear to be extended
[Wed Sep 28 07:12:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 07:12:58 2011] Not overwriting source region fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3_src.reg
[Wed Sep 28 07:12:58 2011] Extracting stamp from image fullrun_ccd7_acisf11508_pi14-548_cl_sm2.00.img.gz, (614, 856) - (652, 895)
[Wed Sep 28 07:12:58 2011] Writing fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3.gif
[Wed Sep 28 07:12:58 2011] ../../acisf11508/products/events/fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3_src.evt and ../../acisf11508/products/events/fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Sep 28 07:12:58 2011] Size of ../../acisf11508/products/events/fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3_src.evt.gz[events] = 187 counts
[Wed Sep 28 07:12:58 2011] Mean chipx,y = (219.08, 516.20)
[Wed Sep 28 07:12:58 2011] Mean tdetx,y = (4136.08, 2218.20)
[Wed Sep 28 07:12:58 2011] chipx,y range = (202.00-238.00, 500.00-535.00)
[Wed Sep 28 07:12:58 2011] Size of ../../acisf11508/products/events/fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 7 counts
[Wed Sep 28 07:12:58 2011] ../../acisf11508/products/images/fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3_src.img and ../../acisf11508/products/images/fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Sep 28 07:12:58 2011] ../../acisf11508/products/spectra/fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3_src.pi and ../../acisf11508/products/spectra/fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Sep 28 07:13:01 2011] ../../acisf11508/products/lightcurves/fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3_src.lc and ../../acisf11508/products/lightcurves/fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Sep 28 07:13:22 2011] Keeping rmf generated by specextract
[Wed Sep 28 07:13:22 2011] 236.161
[Wed Sep 28 07:13:24 2011] Updating aperture counts using extracted products
[Wed Sep 28 07:13:24 2011] Error reading totcts from fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Sep 28 07:13:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 07:13:24 2011] Using photon index=1.80, rate=0.0333, arf fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3.arf
[Wed Sep 28 07:13:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 07:13:24 2011] Updating source flux to 2.5e-13
[Wed Sep 28 07:13:34 2011] Reading fit data from acisf11508/analysis//spectral/fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3_pl.csv
[Wed Sep 28 07:13:34 2011] Spectral fit parameter nH value = 6.6804e+15
[Wed Sep 28 07:13:34 2011] Spectral fit parameter PhoIndex value = 1.26934
[Wed Sep 28 07:13:34 2011] Failed to get F(0.3-8.0) from acisf11508/analysis//spectral/fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 07:13:34 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 07:13:34 2011] Using Nh = 6.7e+15, photon index=1.27, rate=0.0333, arf fullrun_ccd7_acisf11508_pi14-548_pass1_cl_src3.arf
[Wed Sep 28 07:13:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 07:13:34 2011] Updating source flux to 3.2e-13