[Sun Sep 25 18:11:40 2011] Detection parameters:
  Position = (1058.3, 511.0) = 22 14 8.68 -17 1 0.8
  Extent = 1.1" x 0.6", rotation angle = 173 degrees
  Source counts = 77.8 +/- 9.1
  Background counts = 4.2
  Rate = 0.004 +/- 0.0005

[Sun Sep 25 18:11:42 2011] Off-axis axis estimate = 4.41'
[Sun Sep 25 18:12:35 2011] Using EEF radius (= 0.96 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 18:12:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 18:12:35 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Sun Sep 25 18:12:35 2011] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.832
[Sun Sep 25 18:12:35 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.96"
[Sun Sep 25 18:12:36 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass0_src3.ximg exists
[Sun Sep 25 18:12:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11506_pi14-548_cl_pass0_src3.csv
[Sun Sep 25 18:12:36 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Sep 25 18:12:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11506_pi14-548_cl_pass0_src3.csv
[Sun Sep 25 18:12:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11506_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11506_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 18:12:36 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Sep 25 18:12:36 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Sep 25 18:12:36 2011] Fit fullrun_ccd7_acisf11506_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Sep 25 18:12:43 2011] Spatial fit model total counts = 79.557700, observed total counts = 82.000000
[Sun Sep 25 18:12:43 2011] Offset between fit and detection position for source 6 = 0.650254 pixels
[Sun Sep 25 18:12:43 2011] 81.839670 total counts/ 8.646270 bgd. counts: snr = 24.891870
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.650254 pixels
  Position = (1058.0, 511.6) = 22 14 8.71 -17 1 0.7
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 73.2 +/- 9.0
  Background counts = 8.6
  Rate = 0.004 +/- 0.0005
[Sun Sep 25 18:12:43 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 18:12:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 18:12:43 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 18:12:43 2011] Source does appear to be extended
[Sun Sep 25 18:12:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 18:12:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 18:12:59 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Sun Sep 25 18:12:59 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.992
[Sun Sep 25 18:12:59 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.99"
[Sun Sep 25 18:13:00 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass1_src3.ximg exists
[Sun Sep 25 18:13:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11506_pi14-548_cl_pass1_src3.csv
[Sun Sep 25 18:13:00 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Sep 25 18:13:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11506_pi14-548_cl_pass1_src3.csv
[Sun Sep 25 18:13:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11506_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11506_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 18:13:00 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Sep 25 18:13:00 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Sep 25 18:13:00 2011] Fit fullrun_ccd7_acisf11506_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Sep 25 18:13:09 2011] Spatial fit model total counts = 79.335100, observed total counts = 82.000000
[Sun Sep 25 18:13:09 2011] Offset between fit and detection position for source 6 = 0.045480 pixels
[Sun Sep 25 18:13:09 2011] 81.383020 total counts/ 8.965120 bgd. counts: snr = 24.186213
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.045480 pixels
  Position = (1058.1, 511.6) = 22 14 8.70 -17 1 0.7
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 72.4 +/- 9.0
  Background counts = 9.0
  Rate = 0.004 +/- 0.0005
[Sun Sep 25 18:13:09 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 18:13:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 18:13:09 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 18:13:09 2011] Source does appear to be extended
[Sun Sep 25 18:13:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 18:14:24 2011] Not overwriting source region fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src6_src.reg
[Sun Sep 25 18:14:24 2011] Extracting stamp from image fullrun_ccd7_acisf11506_pi14-548_cl_sm2.00.img.gz, (1013, 466) - (1104, 557)
[Sun Sep 25 18:14:24 2011] Writing fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src6.gif
[Sun Sep 25 18:14:33 2011] ../../acisf11506/products/events/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src6_src.evt and ../../acisf11506/products/events/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sun Sep 25 18:14:33 2011] Size of ../../acisf11506/products/events/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src6_src.evt.gz[events] = 81 counts
[Sun Sep 25 18:14:33 2011] Mean chipx,y = (541.91, 906.56)
[Sun Sep 25 18:14:33 2011] Mean tdetx,y = (4458.91, 2608.56)
[Sun Sep 25 18:14:33 2011] chipx,y range = (524.00-563.00, 885.00-928.00)
[Sun Sep 25 18:14:33 2011] Size of ../../acisf11506/products/events/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 53 counts
[Sun Sep 25 18:14:33 2011] ../../acisf11506/products/images/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src6_src.img and ../../acisf11506/products/images/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Sun Sep 25 18:14:33 2011] ../../acisf11506/products/spectra/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src6_src.pi and ../../acisf11506/products/spectra/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sun Sep 25 18:14:33 2011] Not generating rmf since there are only 72 counts
[Sun Sep 25 18:14:36 2011] ../../acisf11506/products/lightcurves/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src6_src.lc and ../../acisf11506/products/lightcurves/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sun Sep 25 18:15:09 2011] 215.873
[Sun Sep 25 18:15:12 2011] Updating aperture counts using extracted products
[Sun Sep 25 18:15:12 2011] Error reading totcts from fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src6_src.pi.gz
[Sun Sep 25 18:15:12 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 18:15:12 2011] Using photon index=1.80, rate=0.00366, arf fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src6.arf
[Sun Sep 25 18:15:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 18:15:12 2011] Updating source flux to 3.1e-14
[Sun Sep 25 18:15:18 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting