[Sun Sep 25 18:11:40 2011] Detection parameters:
  Position = (562.8, 438.0) = 22 14 25.67 -17 1 36.7
  Extent = 1.4" x 1.2", rotation angle = 163 degrees
  Source counts = 169.0 +/- 14.9
  Background counts = 52.0
  Rate = 0.009 +/- 0.0008

[Sun Sep 25 18:11:42 2011] Off-axis axis estimate = 0.31'
[Sun Sep 25 18:12:35 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 18:12:35 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Sun Sep 25 18:12:35 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.573
[Sun Sep 25 18:12:35 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.40"
[Sun Sep 25 18:12:36 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass0_src2.ximg exists
[Sun Sep 25 18:12:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11506_pi14-548_cl_pass0_src2.csv
[Sun Sep 25 18:12:36 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass0_src2_1.ximg exists
[Sun Sep 25 18:12:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11506_pi14-548_cl_pass0_src2.csv
[Sun Sep 25 18:12:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11506_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11506_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 18:12:36 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sun Sep 25 18:12:36 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Sep 25 18:12:36 2011] Fit fullrun_ccd7_acisf11506_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Sep 25 18:12:43 2011] Spatial fit model total counts = 270.000000, observed total counts = 270.000000
[Sun Sep 25 18:12:43 2011] Offset between fit and detection position for source 1 = 1.531756 pixels
[Sun Sep 25 18:12:43 2011] 276.421000 total counts/ 162.645000 bgd. counts: snr = 8.921344
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.531756 pixels
  Position = (564.2, 438.7) = 22 14 25.64 -17 1 36.6
  Extent = 1.5 (1.4-1.5)", rotation angle = 0
  Source counts = 113.8 +/- 16.6
  Background counts = 162.6
  Rate = 0.006 +/- 0.0008
[Sun Sep 25 18:12:43 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 18:12:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 18:12:43 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 18:12:43 2011] Source does appear to be extended
[Sun Sep 25 18:12:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 18:12:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 18:12:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 18:12:59 2011] Initial guess for spatial extent in simple fitting = 1.48"
[Sun Sep 25 18:12:59 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.001
[Sun Sep 25 18:12:59 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.48"
[Sun Sep 25 18:13:00 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass1_src2.ximg exists
[Sun Sep 25 18:13:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11506_pi14-548_cl_pass1_src2.csv
[Sun Sep 25 18:13:00 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass1_src2_1.ximg exists
[Sun Sep 25 18:13:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11506_pi14-548_cl_pass1_src2.csv
[Sun Sep 25 18:13:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11506_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11506_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 18:13:00 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sun Sep 25 18:13:00 2011] fullrun_ccd7_acisf11506_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Sep 25 18:13:00 2011] Fit fullrun_ccd7_acisf11506_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Sep 25 18:13:09 2011] Spatial fit model total counts = 333.921000, observed total counts = 335.000000
[Sun Sep 25 18:13:09 2011] Offset between fit and detection position for source 1 = 0.159708 pixels
[Sun Sep 25 18:13:09 2011] 343.495600 total counts/ 245.819000 bgd. counts: snr = 6.229925
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.159708 pixels
  Position = (564.0, 438.7) = 22 14 25.65 -17 1 36.6
  Extent = 1.3 (0.9-1.9)", rotation angle = 0
  Source counts = 97.7 +/- 18.5
  Background counts = 245.8
  Rate = 0.005 +/- 0.0009
[Sun Sep 25 18:13:09 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 18:13:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 18:13:09 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 18:13:09 2011] Source does appear to be extended
[Sun Sep 25 18:13:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 18:14:24 2011] Not overwriting source region fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src1_src.reg
[Sun Sep 25 18:14:24 2011] Extracting stamp from image fullrun_ccd7_acisf11506_pi14-548_cl_sm2.00.img.gz, (504, 379) - (624, 498)
[Sun Sep 25 18:14:24 2011] Writing fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src1.gif
[Sun Sep 25 18:14:29 2011] ../../acisf11506/products/events/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src1_src.evt and ../../acisf11506/products/events/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Sep 25 18:14:30 2011] Size of ../../acisf11506/products/events/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src1_src.evt.gz[events] = 358 counts
[Sun Sep 25 18:14:30 2011] Mean chipx,y = (220.51, 525.99)
[Sun Sep 25 18:14:30 2011] Mean tdetx,y = (4137.51, 2227.99)
[Sun Sep 25 18:14:30 2011] chipx,y range = (194.00-244.00, 499.00-550.00)
[Sun Sep 25 18:14:30 2011] Size of ../../acisf11506/products/events/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1115 counts
[Sun Sep 25 18:14:30 2011] ../../acisf11506/products/images/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src1_src.img and ../../acisf11506/products/images/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Sep 25 18:14:30 2011] ../../acisf11506/products/spectra/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src1_src.pi and ../../acisf11506/products/spectra/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Sep 25 18:14:30 2011] Not generating rmf since there are only 97 counts
[Sun Sep 25 18:14:33 2011] ../../acisf11506/products/lightcurves/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src1_src.lc and ../../acisf11506/products/lightcurves/fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Sep 25 18:15:08 2011] 235.877
[Sun Sep 25 18:15:12 2011] Updating aperture counts using extracted products
[Sun Sep 25 18:15:12 2011] Error reading totcts from fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Sep 25 18:15:12 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 18:15:12 2011] Using photon index=1.80, rate=0.00494, arf fullrun_ccd7_acisf11506_pi14-548_pass1_cl_src1.arf
[Sun Sep 25 18:15:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 18:15:12 2011] Updating source flux to 3.7e-14
[Sun Sep 25 18:15:18 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting