[Mon Oct 10 10:43:07 2011] Detection parameters:
  Position = (459.0, 427.8) = 19 58 14.83 -55 10 39.4
  Extent = 0.5" x 0.5", rotation angle = 173 degrees
  Source counts = 12.8 +/- 3.9
  Background counts = 2.2
  Rate = 0.0006 +/- 0.0002

[Mon Oct 10 10:43:08 2011] Off-axis axis estimate = 1.15'
[Mon Oct 10 10:43:52 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 10:43:52 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 10 10:43:52 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.923
[Mon Oct 10 10:43:52 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.38"
[Mon Oct 10 10:43:52 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass0_src11.ximg exists
[Mon Oct 10 10:43:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11505_pi14-548_cl_pass0_src11.csv
[Mon Oct 10 10:43:52 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass0_src11_1.ximg exists
[Mon Oct 10 10:43:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11505_pi14-548_cl_pass0_src11.csv
[Mon Oct 10 10:43:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11505_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11505_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 10:43:53 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Mon Oct 10 10:43:53 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Oct 10 10:43:53 2011] Fit fullrun_ccd7_acisf11505_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Oct 10 10:44:00 2011] Spatial fit model total counts = 26.970800, observed total counts = 27.000000
[Mon Oct 10 10:44:00 2011] Offset between fit and detection position for source 3 = 0.777778 pixels
[Mon Oct 10 10:44:00 2011] 27.151300 total counts/ 15.918700 bgd. counts: snr = 2.815312
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.777778 pixels
  Position = (459.5, 428.3) = 19 58 14.83 -55 10 39.4
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 11.2 +/- 5.2
  Background counts = 15.9
  Rate = 0.0005 +/- 0.0003
[Mon Oct 10 10:44:00 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 10:44:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 10:44:00 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 10:44:00 2011] Source does appear to be extended
[Mon Oct 10 10:44:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 10:44:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 10:44:19 2011] Initial guess for spatial extent in simple fitting = 0.35"
[Mon Oct 10 10:44:19 2011] source mask rpix=0.7, npix_max = 5, mask sum = 9, frac = 1.550
[Mon Oct 10 10:44:19 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.35"
[Mon Oct 10 10:44:20 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass1_src11.ximg exists
[Mon Oct 10 10:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11505_pi14-548_cl_pass1_src11.csv
[Mon Oct 10 10:44:20 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass1_src11_1.ximg exists
[Mon Oct 10 10:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11505_pi14-548_cl_pass1_src11.csv
[Mon Oct 10 10:44:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11505_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11505_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 10:44:20 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Mon Oct 10 10:44:20 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Oct 10 10:44:20 2011] Fit fullrun_ccd7_acisf11505_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Oct 10 10:44:33 2011] Spatial fit model total counts = 26.966900, observed total counts = 27.000000
[Mon Oct 10 10:44:33 2011] Offset between fit and detection position for source 3 = 0.000447 pixels
[Mon Oct 10 10:44:33 2011] 27.150300 total counts/ 15.941300 bgd. counts: snr = 2.807405
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000447 pixels
  Position = (459.5, 428.3) = 19 58 14.83 -55 10 39.4
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 11.2 +/- 5.2
  Background counts = 15.9
  Rate = 0.0005 +/- 0.0003
[Mon Oct 10 10:44:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 10:44:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 10:44:33 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 10:44:33 2011] Source does appear to be extended
[Mon Oct 10 10:44:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 10:46:22 2011] Not overwriting source region fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src3_src.reg
[Mon Oct 10 10:46:22 2011] Extracting stamp from image fullrun_ccd7_acisf11505_pi14-548_cl_sm2.00.img.gz, (444, 413) - (475, 444)
[Mon Oct 10 10:46:22 2011] Writing fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src3.gif
[Mon Oct 10 10:46:53 2011] ../../acisf11505/products/events/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src3_src.evt and ../../acisf11505/products/events/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Oct 10 10:46:53 2011] Size of ../../acisf11505/products/events/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src3_src.evt.gz[events] = 13 counts
[Mon Oct 10 10:46:53 2011] Mean chipx,y = (185.62, 642.31)
[Mon Oct 10 10:46:53 2011] Mean tdetx,y = (4102.62, 2344.31)
[Mon Oct 10 10:46:53 2011] chipx,y range = (170.00-200.00, 629.00-661.00)
[Mon Oct 10 10:46:53 2011] Size of ../../acisf11505/products/events/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 15 counts
[Mon Oct 10 10:46:53 2011] ../../acisf11505/products/images/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src3_src.img and ../../acisf11505/products/images/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Oct 10 10:46:53 2011] ../../acisf11505/products/spectra/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src3_src.pi and ../../acisf11505/products/spectra/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Oct 10 10:46:53 2011] Not generating rmf since there are only 11 counts
[Mon Oct 10 10:46:58 2011] ../../acisf11505/products/lightcurves/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src3_src.lc and ../../acisf11505/products/lightcurves/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Oct 10 10:47:09 2011] 232.993
[Mon Oct 10 10:47:12 2011] Updating aperture counts using extracted products
[Mon Oct 10 10:47:12 2011] Error reading totcts from fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Oct 10 10:47:12 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 10:47:12 2011] Using photon index=1.80, rate=0.000543, arf fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src3.arf
[Mon Oct 10 10:47:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 10:47:12 2011] Updating source flux to 4.1e-15
[Mon Oct 10 10:47:38 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting