[Mon Oct 10 10:43:08 2011] Detection parameters:
  Position = (422.8, 274.5) = 19 58 16.91 -55 11 54.9
  Extent = 0.7" x 0.6", rotation angle = 110 degrees
  Source counts = 46.3 +/- 7.0
  Background counts = 2.7
  Rate = 0.002 +/- 0.0003

[Mon Oct 10 10:43:08 2011] Off-axis axis estimate = 2.31'
[Mon Oct 10 10:43:52 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 10:43:52 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Mon Oct 10 10:43:52 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.073
[Mon Oct 10 10:43:52 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.47"
[Mon Oct 10 10:43:52 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 10 10:43:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11505_pi14-548_cl_pass0_src3.csv
[Mon Oct 10 10:43:52 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 10 10:43:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11505_pi14-548_cl_pass0_src3.csv
[Mon Oct 10 10:43:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11505_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11505_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 10:43:52 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 10 10:43:52 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 10 10:43:52 2011] Fit fullrun_ccd7_acisf11505_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct 10 10:44:00 2011] Spatial fit model total counts = 51.843300, observed total counts = 53.000000
[Mon Oct 10 10:44:00 2011] Offset between fit and detection position for source 17 = 1.080188 pixels
[Mon Oct 10 10:44:00 2011] 52.831300 total counts/ 15.940100 bgd. counts: snr = 9.240113
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.080188 pixels
  Position = (423.7, 275.1) = 19 58 16.89 -55 11 54.8
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 36.9 +/- 7.3
  Background counts = 15.9
  Rate = 0.002 +/- 0.0004
[Mon Oct 10 10:44:00 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 10:44:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 10:44:00 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 10:44:00 2011] Source does appear to be extended
[Mon Oct 10 10:44:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 10:44:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 10:44:19 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Mon Oct 10 10:44:19 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.905
[Mon Oct 10 10:44:19 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.53"
[Mon Oct 10 10:44:20 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 10 10:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11505_pi14-548_cl_pass1_src3.csv
[Mon Oct 10 10:44:20 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 10 10:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11505_pi14-548_cl_pass1_src3.csv
[Mon Oct 10 10:44:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11505_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11505_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 10:44:20 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 10 10:44:20 2011] fullrun_ccd7_acisf11505_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 10 10:44:20 2011] Fit fullrun_ccd7_acisf11505_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct 10 10:44:33 2011] Spatial fit model total counts = 53.992200, observed total counts = 54.000000
[Mon Oct 10 10:44:33 2011] Offset between fit and detection position for source 17 = 0.030207 pixels
[Mon Oct 10 10:44:33 2011] 54.510800 total counts/ 15.854000 bgd. counts: snr = 9.708597
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.030207 pixels
  Position = (423.6, 275.2) = 19 58 16.89 -55 11 54.8
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 38.7 +/- 7.4
  Background counts = 15.9
  Rate = 0.002 +/- 0.0004
[Mon Oct 10 10:44:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 10:44:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 10:44:33 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 10:44:33 2011] Source does appear to be extended
[Mon Oct 10 10:44:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 10:46:22 2011] Not overwriting source region fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src17_src.reg
[Mon Oct 10 10:46:22 2011] Extracting stamp from image fullrun_ccd7_acisf11505_pi14-548_cl_sm2.00.img.gz, (399, 250) - (449, 300)
[Mon Oct 10 10:46:22 2011] Writing fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src17.gif
[Mon Oct 10 10:46:28 2011] ../../acisf11505/products/events/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src17_src.evt and ../../acisf11505/products/events/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Mon Oct 10 10:46:28 2011] Size of ../../acisf11505/products/events/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src17_src.evt.gz[events] = 45 counts
[Mon Oct 10 10:46:28 2011] Mean chipx,y = (76.31, 761.40)
[Mon Oct 10 10:46:28 2011] Mean tdetx,y = (3993.31, 2463.40)
[Mon Oct 10 10:46:28 2011] chipx,y range = (60.00-95.00, 745.00-780.00)
[Mon Oct 10 10:46:28 2011] Size of ../../acisf11505/products/events/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 21 counts
[Mon Oct 10 10:46:28 2011] ../../acisf11505/products/images/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src17_src.img and ../../acisf11505/products/images/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Mon Oct 10 10:46:28 2011] ../../acisf11505/products/spectra/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src17_src.pi and ../../acisf11505/products/spectra/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Mon Oct 10 10:46:28 2011] Not generating rmf since there are only 38 counts
[Mon Oct 10 10:46:31 2011] ../../acisf11505/products/lightcurves/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src17_src.lc and ../../acisf11505/products/lightcurves/fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Mon Oct 10 10:47:08 2011] 225.554
[Mon Oct 10 10:47:12 2011] Updating aperture counts using extracted products
[Mon Oct 10 10:47:12 2011] Error reading totcts from fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src17_src.pi.gz
[Mon Oct 10 10:47:12 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 10:47:12 2011] Using photon index=1.80, rate=0.00187, arf fullrun_ccd7_acisf11505_pi14-548_pass1_cl_src17.arf
[Mon Oct 10 10:47:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 10:47:12 2011] Updating source flux to 1.4e-14
[Mon Oct 10 10:47:38 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting