[Fri Oct 28 19:29:04 2011] Detection parameters:
  Position = (629.6, 381.2) = 17 37 17.07 -56 31 10.1
  Extent = 0.8" x 0.5", rotation angle = 94 degrees
  Source counts = 33.1 +/- 5.8
  Background counts = 0.9
  Rate = 0.002 +/- 0.0003

[Fri Oct 28 19:29:05 2011] Off-axis axis estimate = 3.59'
[Fri Oct 28 19:29:53 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 19:29:53 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Fri Oct 28 19:29:53 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.045
[Fri Oct 28 19:29:53 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.72"
[Fri Oct 28 19:29:53 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 28 19:29:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11502_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 19:29:53 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 28 19:29:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11502_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 19:29:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11502_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11502_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 19:29:54 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 28 19:29:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11502_pi14-548_cl_pass0_tfrozen_src3.csv
[Fri Oct 28 19:29:54 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 28 19:29:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11502_pi14-548_cl_pass0_tfrozen_src3.csv
[Fri Oct 28 19:29:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11502_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11502_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 19:30:01 2011] Spatial fit model total counts = 31.302300, observed total counts = 35.000000
[Fri Oct 28 19:30:01 2011] Offset between fit and detection position for source 7 = 0.489951 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.489951 pixels
  Position = (630.1, 381.0) = 17 37 17.08 -56 31 10.5
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 32.5 +/- 5.7
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Fri Oct 28 19:30:01 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 19:30:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 19:30:01 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 19:30:01 2011] Source does appear to be extended
[Fri Oct 28 19:30:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 19:30:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 19:30:22 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Fri Oct 28 19:30:22 2011] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.706
[Fri Oct 28 19:30:22 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.92"
[Fri Oct 28 19:30:22 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 28 19:30:22 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 28 19:30:22 2011] Fit fullrun_ccd6_acisf11502_pi14-548_cl_pass1_src3 appears to have run properly
[Fri Oct 28 19:30:22 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 28 19:30:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11502_pi14-548_cl_pass1_tfrozen_src3.csv
[Fri Oct 28 19:30:22 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 28 19:30:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11502_pi14-548_cl_pass1_tfrozen_src3.csv
[Fri Oct 28 19:30:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11502_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11502_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 19:30:30 2011] Spatial fit model total counts = 31.751700, observed total counts = 35.000000
[Fri Oct 28 19:30:30 2011] Offset between fit and detection position for source 7 = 0.106854 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.106854 pixels
  Position = (630.1, 381.1) = 17 37 17.08 -56 31 10.4
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 32.4 +/- 5.7
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Fri Oct 28 19:30:30 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 19:30:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 19:30:30 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 19:30:30 2011] Source does appear to be extended
[Fri Oct 28 19:30:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 19:37:23 2011] Not overwriting source region fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7_src.reg
[Fri Oct 28 19:37:23 2011] Extracting stamp from image fullrun_ccd6_acisf11502_pi14-548_cl_sm2.00.img.gz, (586, 337) - (674, 425)
[Fri Oct 28 19:37:23 2011] Writing fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7.gif
[Fri Oct 28 19:38:32 2011] ../../acisf11502/products/events/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7_src.evt and ../../acisf11502/products/events/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Fri Oct 28 19:38:32 2011] Size of ../../acisf11502/products/events/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7_src.evt.gz[events] = 34 counts
[Fri Oct 28 19:38:32 2011] Mean chipx,y = (798.85, 408.24)
[Fri Oct 28 19:38:32 2011] Mean tdetx,y = (3673.85, 2110.24)
[Fri Oct 28 19:38:32 2011] chipx,y range = (783.00-821.00, 389.00-430.00)
[Fri Oct 28 19:38:32 2011] Size of ../../acisf11502/products/events/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 12 counts
[Fri Oct 28 19:38:32 2011] ../../acisf11502/products/images/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7_src.img and ../../acisf11502/products/images/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Fri Oct 28 19:38:32 2011] Not generating rmf since there are only 32 counts
[Fri Oct 28 19:38:32 2011] arf not found, will run specextract
[Fri Oct 28 19:38:58 2011] ../../acisf11502/products/spectra/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7.warf not found
[Fri Oct 28 19:38:58 2011] ../../acisf11502/products/spectra/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7.wrmf not found
[Fri Oct 28 19:38:58 2011] Removal of ../../acisf11502/products/spectra/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7.soff failed
[Fri Oct 28 19:39:04 2011] ../../acisf11502/products/lightcurves/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7_src.lc and ../../acisf11502/products/lightcurves/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Fri Oct 28 19:42:01 2011] Spectrum 7 has only 32 counts, deleting rmf
[Fri Oct 28 19:42:01 2011] 200.712
[Fri Oct 28 19:48:03 2011] Updating aperture counts using extracted products
[Fri Oct 28 19:48:03 2011] Error reading totcts from fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7_src.pi.gz
[Fri Oct 28 19:48:03 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 19:48:03 2011] Using photon index=1.80, rate=0.00163, arf fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7.arf
[Fri Oct 28 19:48:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 19:48:03 2011] Updating source flux to 1.8e-14
[Fri Oct 28 19:48:09 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 19:48:10 2011] acisf11502/analysis//spectral/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete