[Fri Oct 28 19:29:04 2011] Detection parameters:
  Position = (876.3, 730.6) = 17 37 2.44 -56 28 18.1
  Extent = 1.6" x 1.0", rotation angle = 157 degrees
  Source counts = 11.5 +/- 3.6
  Background counts = 1.5
  Rate = 0.0006 +/- 0.0002

[Fri Oct 28 19:29:05 2011] Off-axis axis estimate = 7.09'
[Fri Oct 28 19:29:53 2011] Using EEF radius (= 2.24 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 19:29:53 2011] Initial guess for spatial extent in simple fitting = 2.24"
[Fri Oct 28 19:29:53 2011] source mask rpix=4.5, npix_max = 101, mask sum = 72, frac = 0.707
[Fri Oct 28 19:29:53 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 2.24"
[Fri Oct 28 19:29:53 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass0_src5.ximg exists
[Fri Oct 28 19:29:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11502_pi14-548_cl_pass0_src5.csv
[Fri Oct 28 19:29:53 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Oct 28 19:29:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11502_pi14-548_cl_pass0_src5.csv
[Fri Oct 28 19:29:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11502_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11502_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 19:29:54 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Oct 28 19:29:54 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Oct 28 19:29:54 2011] Fit fullrun_ccd6_acisf11502_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Oct 28 19:30:01 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 25.761093 pixels away
[Fri Oct 28 19:30:01 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 19:30:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 19:30:01 2011] Assessing source extent using major
[Fri Oct 28 19:30:01 2011] Source does appear to be extended
[Fri Oct 28 19:30:01 2011] Computing asymmetry using major and minor axis, asym = 1.54
[Fri Oct 28 19:30:01 2011] Source is asymmetric
[Fri Oct 28 19:30:22 2011] Using EEF radius (= 2.24 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 19:30:22 2011] Initial guess for spatial extent in simple fitting = 2.24"
[Fri Oct 28 19:30:22 2011] source mask rpix=4.5, npix_max = 101, mask sum = 72, frac = 0.707
[Fri Oct 28 19:30:22 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 2.24"
[Fri Oct 28 19:30:22 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass1_src5.ximg exists
[Fri Oct 28 19:30:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11502_pi14-548_cl_pass1_src5.csv
[Fri Oct 28 19:30:22 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Oct 28 19:30:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11502_pi14-548_cl_pass1_src5.csv
[Fri Oct 28 19:30:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11502_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11502_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 19:30:22 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Oct 28 19:30:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11502_pi14-548_cl_pass1_tfrozen_src5.csv
[Fri Oct 28 19:30:22 2011] fullrun_ccd6_acisf11502_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Oct 28 19:30:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11502_pi14-548_cl_pass1_tfrozen_src5.csv
[Fri Oct 28 19:30:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11502_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11502_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 19:30:30 2011] Spatial fit model total counts = 28.220600, observed total counts = 25.000000
[Fri Oct 28 19:30:30 2011] Offset between fit and detection position for source 5 = 1.377287 pixels
[Fri Oct 28 19:30:30 2011] 28.940100 total counts/ 16.372100 bgd. counts: snr = 3.106090
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.377287 pixels
  Position = (875.0, 730.2) = 17 37 2.55 -56 28 18.5
  Extent = 1.3 (0.6-1.8)", rotation angle = 0
  Source counts = 12.6 +/- 5.4
  Background counts = 16.4
  Rate = 0.0006 +/- 0.0003
[Fri Oct 28 19:30:30 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 19:30:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 19:30:30 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 19:30:30 2011] Source does appear to be extended
[Fri Oct 28 19:30:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 19:37:23 2011] Not overwriting source region fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5_src.reg
[Fri Oct 28 19:37:23 2011] Extracting stamp from image fullrun_ccd6_acisf11502_pi14-548_cl_sm2.00.img.gz, (818, 673) - (932, 788)
[Fri Oct 28 19:37:23 2011] Writing fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5.gif
[Fri Oct 28 19:39:41 2011] ../../acisf11502/products/events/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5_src.evt and ../../acisf11502/products/events/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Oct 28 19:39:41 2011] Size of ../../acisf11502/products/events/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5_src.evt.gz[events] = 16 counts
[Fri Oct 28 19:39:41 2011] Mean chipx,y = (376.38, 365.75)
[Fri Oct 28 19:39:41 2011] Mean tdetx,y = (3251.38, 2067.75)
[Fri Oct 28 19:39:41 2011] chipx,y range = (358.00-393.00, 342.00-387.00)
[Fri Oct 28 19:39:41 2011] Size of ../../acisf11502/products/events/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 25 counts
[Fri Oct 28 19:39:41 2011] ../../acisf11502/products/images/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5_src.img and ../../acisf11502/products/images/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Oct 28 19:39:41 2011] Not generating rmf since there are only 12 counts
[Fri Oct 28 19:39:41 2011] arf not found, will run specextract
[Fri Oct 28 19:40:11 2011] ../../acisf11502/products/spectra/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5.warf not found
[Fri Oct 28 19:40:11 2011] ../../acisf11502/products/spectra/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5.wrmf not found
[Fri Oct 28 19:40:11 2011] Removal of ../../acisf11502/products/spectra/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5.soff failed
[Fri Oct 28 19:40:16 2011] ../../acisf11502/products/lightcurves/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5_src.lc and ../../acisf11502/products/lightcurves/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Oct 28 19:42:01 2011] Spectrum 5 has only 13 counts, deleting rmf
[Fri Oct 28 19:42:01 2011] 170.135
[Fri Oct 28 19:48:03 2011] Updating aperture counts using extracted products
[Fri Oct 28 19:48:03 2011] Error reading totcts from fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Oct 28 19:48:03 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 19:48:03 2011] Using photon index=1.80, rate=0.000633, arf fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5.arf
[Fri Oct 28 19:48:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 19:48:03 2011] Updating source flux to 7.8e-15
[Fri Oct 28 19:48:09 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 19:48:10 2011] acisf11502/analysis//spectral/fullrun_ccd6_acisf11502_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete