[Wed Oct 26 18:10:19 2011] Detection parameters:
  Position = (203.9, 245.2) = 0 24 41.23 64 7 42.8
  Extent = 1.2" x 1.0", rotation angle = 90 degrees
  Source counts = 516.9 +/- 30.0
  Background counts = 380.1
  Rate = 0.01 +/- 0.0006

[Wed Oct 26 18:10:27 2011] Off-axis axis estimate = 3.48'
[Wed Oct 26 18:25:21 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 18:25:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 18:25:21 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Wed Oct 26 18:25:21 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.113
[Wed Oct 26 18:25:21 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.69"
[Wed Oct 26 18:25:24 2011] fullrun_ccd6_acisf00115_pi14-548_cl_pass0_src10.ximg exists
[Wed Oct 26 18:25:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00115_pi14-548_cl_pass0_src10.csv
[Wed Oct 26 18:25:24 2011] fullrun_ccd6_acisf00115_pi14-548_cl_pass0_src10_1.ximg exists
[Wed Oct 26 18:25:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00115_pi14-548_cl_pass0_src10.csv
[Wed Oct 26 18:25:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00115_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00115_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 18:25:26 2011] fullrun_ccd6_acisf00115_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed Oct 26 18:25:26 2011] fullrun_ccd6_acisf00115_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Oct 26 18:25:26 2011] Fit fullrun_ccd6_acisf00115_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Oct 26 18:26:25 2011] Spatial fit model total counts = 992.684000, observed total counts = 991.000000
[Wed Oct 26 18:26:25 2011] Offset between fit and detection position for source 26 = 3.397952 pixels
[Wed Oct 26 18:26:25 2011] 999.913000 total counts/ 635.750000 bgd. counts: snr = 14.442841
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 3.397952 pixels
  Position = (204.8, 241.9) = 0 24 41.19 64 7 40.9
  Extent = 1.5 (1.5-1.5)", rotation angle = 0
  Source counts = 364.2 +/- 31.6
  Background counts = 635.8
  Rate = 0.007 +/- 0.0006
[Wed Oct 26 18:26:25 2011] Spatial fit model total counts = 1236.990000, observed total counts = 1237.000000
[Wed Oct 26 18:26:25 2011] Offset between fit and detection position for source 26 = 2.714965 pixels
[Wed Oct 26 18:26:25 2011] Warning, changing simple spatial fit ID from 10 to 24
[Wed Oct 26 18:26:25 2011] 1222.921000 total counts/ 1015.390000 bgd. counts: snr = 6.512782
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 2.714965 pixels
  Position = (204.2, 239.3) = 0 24 41.24 64 7 39.6
  Extent = 1.5 (0.8-3.0)", rotation angle = 0
  Source counts = 207.5 +/- 35.0
  Background counts = 1015.4
  Rate = 0.004 +/- 0.0007
[Wed Oct 26 18:26:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 18:26:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 18:26:25 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 18:26:25 2011] Source does appear to be extended
[Wed Oct 26 18:26:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 18:26:25 2011] Source is confused with source 25
[Wed Oct 26 18:27:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 18:27:58 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Wed Oct 26 18:27:58 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Wed Oct 26 18:27:58 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 1.50"
[Wed Oct 26 18:28:00 2011] fullrun_ccd6_acisf00115_pi14-548_cl_pass1_src10.ximg exists
[Wed Oct 26 18:28:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00115_pi14-548_cl_pass1_src10.csv
[Wed Oct 26 18:28:00 2011] fullrun_ccd6_acisf00115_pi14-548_cl_pass1_src10_1.ximg exists
[Wed Oct 26 18:28:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00115_pi14-548_cl_pass1_src10.csv
[Wed Oct 26 18:28:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00115_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00115_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 18:28:02 2011] fullrun_ccd6_acisf00115_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed Oct 26 18:28:02 2011] fullrun_ccd6_acisf00115_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Oct 26 18:28:03 2011] Fit fullrun_ccd6_acisf00115_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Oct 26 18:28:48 2011] Spatial fit model total counts = 1309.860000, observed total counts = 1308.000000
[Wed Oct 26 18:28:48 2011] Offset between fit and detection position for source 26 = 5.445993 pixels
[Wed Oct 26 18:28:48 2011] 1201.634356 total counts/ 0.834356 bgd. counts: snr = 1314.604100
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 5.445993 pixels
  Position = (205.5, 244.6) = 0 24 41.15 64 7 42.2
  Extent = 2.9 (2.9-2.9)", rotation angle = 0
  Source counts = 1200.8 +/- 34.7
  Background counts = 0.8
  Rate = 0.02 +/- 0.0007
[Wed Oct 26 18:28:48 2011] Spatial fit model total counts = 1237.000000, observed total counts = 1237.000000
[Wed Oct 26 18:28:48 2011] Offset between fit and detection position for source 26 = 3.475517 pixels
[Wed Oct 26 18:28:48 2011] Warning, changing simple spatial fit ID from 10 to 24
[Wed Oct 26 18:28:48 2011] 948.272000 total counts/ 690.361000 bgd. counts: snr = 9.815937
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 3.475517 pixels
  Position = (204.9, 241.1) = 0 24 41.19 64 7 40.5
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 257.9 +/- 30.8
  Background counts = 690.4
  Rate = 0.005 +/- 0.0006
[Wed Oct 26 18:28:48 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 18:28:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 18:28:48 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 18:28:48 2011] Source does appear to be extended
[Wed Oct 26 18:28:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 18:30:52 2011] Not overwriting source region fullrun_ccd6_acisf00115_pi14-548_pass1_cl_src26_src.reg
[Wed Oct 26 18:30:52 2011] Extracting stamp from image fullrun_ccd6_acisf00115_pi14-548_cl_sm2.00.img.gz, (136, 173) - (274, 310)
[Wed Oct 26 18:30:53 2011] Writing fullrun_ccd6_acisf00115_pi14-548_pass1_cl_src26.gif
[Wed Oct 26 18:31:26 2011] ../../acisf00115/products/events/fullrun_ccd6_acisf00115_pi14-548_pass1_cl_src26_src.evt and ../../acisf00115/products/events/fullrun_ccd6_acisf00115_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Wed Oct 26 18:31:26 2011] Size of ../../acisf00115/products/events/fullrun_ccd6_acisf00115_pi14-548_pass1_cl_src26_src.evt.gz[events] = 1611 counts
[Wed Oct 26 18:31:26 2011] Mean chipx,y = (958.28, 219.68)
[Wed Oct 26 18:31:26 2011] Mean tdetx,y = (3833.28, 1921.68)
[Wed Oct 26 18:31:26 2011] chipx,y range = (929.00-985.00, 192.00-249.00)
[Wed Oct 26 18:31:26 2011] Size of ../../acisf00115/products/events/fullrun_ccd6_acisf00115_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 2038 counts
[Wed Oct 26 18:31:26 2011] ../../acisf00115/products/images/fullrun_ccd6_acisf00115_pi14-548_pass1_cl_src26_src.img and ../../acisf00115/products/images/fullrun_ccd6_acisf00115_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Wed Oct 26 18:31:26 2011] ../../acisf00115/products/spectra/fullrun_ccd6_acisf00115_pi14-548_pass1_cl_src26_src.pi and ../../acisf00115/products/spectra/fullrun_ccd6_acisf00115_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Wed Oct 26 18:31:29 2011] ../../acisf00115/products/lightcurves/fullrun_ccd6_acisf00115_pi14-548_pass1_cl_src26_src.lc and ../../acisf00115/products/lightcurves/fullrun_ccd6_acisf00115_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Wed Oct 26 18:35:01 2011] Keeping rmf generated by specextract
[Wed Oct 26 18:35:01 2011] 212.291
[Wed Oct 26 19:11:40 2011] Updating aperture counts using extracted products
[Wed Oct 26 19:11:40 2011] Error reading totcts from fullrun_ccd6_acisf00115_pi14-548_pass1_cl_src26_src.pi.gz
[Wed Oct 26 19:11:44 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 19:11:44 2011] Using photon index=1.80, rate=0.00527, arf fullrun_ccd6_acisf00115_pi14-548_pass1_cl_src26.arf
[Wed Oct 26 19:11:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 19:11:44 2011] Updating source flux to 6.8e-14
[Wed Oct 26 19:13:11 2011] Flag c found in src. 26 procflags, skipping spectral fitting