[Wed Oct 26 18:10:13 2011] Detection parameters:
  Position = (601.6, 499.0) = 0 24 40.97 64 20 33.2
  Extent = 4.3" x 4.3", rotation angle = 173 degrees
  Source counts = 330.3 +/- 20.9
  Background counts = 104.7
  Rate = 0.007 +/- 0.0004

[Wed Oct 26 18:10:14 2011] Off-axis axis estimate = 11.21'
[Wed Oct 26 18:25:18 2011] Using EEF radius (= 5.59 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 18:25:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 18:25:18 2011] Initial guess for spatial extent in simple fitting = 5.59"
[Wed Oct 26 18:25:18 2011] source mask rpix=11.4, npix_max = 563, mask sum = 552, frac = 0.980
[Wed Oct 26 18:25:18 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.59"
[Wed Oct 26 18:25:19 2011] fullrun_ccd2_acisf00115_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 26 18:25:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00115_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 18:25:19 2011] fullrun_ccd2_acisf00115_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 26 18:25:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00115_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 18:25:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00115_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00115_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 18:25:19 2011] fullrun_ccd2_acisf00115_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 26 18:25:19 2011] fullrun_ccd2_acisf00115_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 26 18:25:19 2011] Fit fullrun_ccd2_acisf00115_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 26 18:26:08 2011] Spatial fit model total counts = 517.914000, observed total counts = 516.000000
[Wed Oct 26 18:26:08 2011] Offset between fit and detection position for source 1 = 0.937712 pixels
[Wed Oct 26 18:26:08 2011] 517.599000 total counts/ 112.662000 bgd. counts: snr = 38.150368
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.937712 pixels
  Position = (602.5, 498.7) = 0 24 40.94 64 20 32.8
  Extent = 5.5 (5.1-6.0)", rotation angle = 0
  Source counts = 404.9 +/- 22.8
  Background counts = 112.7
  Rate = 0.008 +/- 0.0005
[Wed Oct 26 18:26:08 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 18:26:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 18:26:08 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 18:26:08 2011] Source does appear to be extended
[Wed Oct 26 18:26:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 18:27:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 18:27:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 18:27:56 2011] Initial guess for spatial extent in simple fitting = 5.50"
[Wed Oct 26 18:27:56 2011] source mask rpix=11.2, npix_max = 546, mask sum = 529, frac = 0.969
[Wed Oct 26 18:27:56 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.50"
[Wed Oct 26 18:27:56 2011] fullrun_ccd2_acisf00115_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 26 18:27:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00115_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 18:27:56 2011] fullrun_ccd2_acisf00115_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 26 18:27:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00115_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 18:27:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00115_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00115_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 18:27:57 2011] fullrun_ccd2_acisf00115_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 26 18:27:57 2011] fullrun_ccd2_acisf00115_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 26 18:27:57 2011] Fit fullrun_ccd2_acisf00115_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 26 18:28:35 2011] Spatial fit model total counts = 515.560000, observed total counts = 514.000000
[Wed Oct 26 18:28:35 2011] Offset between fit and detection position for source 1 = 0.036575 pixels
[Wed Oct 26 18:28:35 2011] 515.301000 total counts/ 109.383000 bgd. counts: snr = 38.811765
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.036575 pixels
  Position = (602.5, 498.7) = 0 24 40.94 64 20 32.8
  Extent = 5.5 (5.1-6.0)", rotation angle = 0
  Source counts = 405.9 +/- 22.7
  Background counts = 109.4
  Rate = 0.008 +/- 0.0005
[Wed Oct 26 18:28:35 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 18:28:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 18:28:35 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 18:28:35 2011] Source does appear to be extended
[Wed Oct 26 18:28:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 18:30:19 2011] Not overwriting source region fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 26 18:30:19 2011] Extracting stamp from image fullrun_ccd2_acisf00115_pi14-548_cl_sm2.00.img.gz, (349, 246) - (856, 752)
[Wed Oct 26 18:30:19 2011] Writing fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1.gif
[Wed Oct 26 18:30:20 2011] ../../acisf00115/products/events/fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1_src.evt and ../../acisf00115/products/events/fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 26 18:30:20 2011] Size of ../../acisf00115/products/events/fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1_src.evt.gz[events] = 487 counts
[Wed Oct 26 18:30:20 2011] Mean chipx,y = (613.66, 519.79)
[Wed Oct 26 18:30:20 2011] Mean tdetx,y = (3580.79, 3472.34)
[Wed Oct 26 18:30:20 2011] chipx,y range = (574.00-663.00, 471.00-580.00)
[Wed Oct 26 18:30:20 2011] Size of ../../acisf00115/products/events/fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1189 counts
[Wed Oct 26 18:30:20 2011] ../../acisf00115/products/images/fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1_src.img and ../../acisf00115/products/images/fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 26 18:30:20 2011] ../../acisf00115/products/spectra/fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1_src.pi and ../../acisf00115/products/spectra/fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 26 18:30:23 2011] ../../acisf00115/products/lightcurves/fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1_src.lc and ../../acisf00115/products/lightcurves/fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 26 18:30:32 2011] Keeping rmf generated by specextract
[Wed Oct 26 18:30:32 2011] 163.114
[Wed Oct 26 19:11:38 2011] Updating aperture counts using extracted products
[Wed Oct 26 19:11:38 2011] Error reading totcts from fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 26 19:11:38 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 19:11:38 2011] Using photon index=1.80, rate=0.0083, arf fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 19:11:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 19:11:39 2011] Updating source flux to 1.3e-13
[Wed Oct 26 19:13:09 2011] Reading fit data from acisf00115/analysis//spectral/fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct 26 19:13:09 2011] Spectral fit parameter nH value = 3.89348e+21
[Wed Oct 26 19:13:09 2011] Spectral fit parameter PhoIndex value = 1.87054
[Wed Oct 26 19:13:09 2011] Failed to get F(0.3-8.0) from acisf00115/analysis//spectral/fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct 26 19:13:09 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 19:13:09 2011] Using Nh = 3.9e+21, photon index=1.87, rate=0.0083, arf fullrun_ccd2_acisf00115_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 19:13:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 19:13:09 2011] Updating source flux to 1.1e-13