[Mon Oct  3 02:56:32 2011] Detection parameters:
  Position = (1143.8, 822.4) = 0 39 48.76 3 22 17.6
  Extent = 2.1" x 1.6", rotation angle = 154 degrees
  Source counts = 1809.1 +/- 44.0
  Background counts = 129.9
  Rate = 0.02 +/- 0.0005

[Mon Oct  3 02:56:33 2011] Off-axis axis estimate = 8.18'
[Mon Oct  3 02:58:08 2011] Using EEF radius (= 2.96 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 02:58:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 02:58:08 2011] Initial guess for spatial extent in simple fitting = 2.96"
[Mon Oct  3 02:58:08 2011] source mask rpix=6.0, npix_max = 169, mask sum = 169, frac = 0.995
[Mon Oct  3 02:58:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.96"
[Mon Oct  3 02:58:09 2011] fullrun_ccd3_acisf11389_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct  3 02:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11389_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 02:58:09 2011] fullrun_ccd3_acisf11389_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct  3 02:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11389_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 02:58:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11389_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11389_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 02:58:09 2011] fullrun_ccd3_acisf11389_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct  3 02:58:09 2011] fullrun_ccd3_acisf11389_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct  3 02:58:09 2011] Fit fullrun_ccd3_acisf11389_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct  3 02:58:22 2011] Spatial fit model total counts = 1965.480000, observed total counts = 1959.000000
[Mon Oct  3 02:58:22 2011] Offset between fit and detection position for source 2 = 0.712524 pixels
[Mon Oct  3 02:58:22 2011] 1965.333000 total counts/ 173.943000 bgd. counts: snr = 135.827175
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.712524 pixels
  Position = (1144.3, 823.0) = 0 39 48.76 3 22 17.6
  Extent = 2.5 (2.4-2.5)", rotation angle = 0
  Source counts = 1791.4 +/- 44.3
  Background counts = 173.9
  Rate = 0.02 +/- 0.0005
[Mon Oct  3 02:58:22 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 02:58:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 02:58:22 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 02:58:22 2011] Source does appear to be extended
[Mon Oct  3 02:58:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 02:58:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 02:58:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 02:58:52 2011] Initial guess for spatial extent in simple fitting = 2.45"
[Mon Oct  3 02:58:52 2011] source mask rpix=5.0, npix_max = 120, mask sum = 121, frac = 1.007
[Mon Oct  3 02:58:52 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.45"
[Mon Oct  3 02:58:53 2011] fullrun_ccd3_acisf11389_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct  3 02:58:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11389_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 02:58:53 2011] fullrun_ccd3_acisf11389_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct  3 02:58:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11389_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 02:58:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11389_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11389_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 02:58:54 2011] fullrun_ccd3_acisf11389_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct  3 02:58:54 2011] fullrun_ccd3_acisf11389_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct  3 02:58:54 2011] Fit fullrun_ccd3_acisf11389_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct  3 02:59:04 2011] Spatial fit model total counts = 1932.700000, observed total counts = 1931.000000
[Mon Oct  3 02:59:04 2011] Offset between fit and detection position for source 2 = 0.079708 pixels
[Mon Oct  3 02:59:04 2011] 1931.563000 total counts/ 211.183000 bgd. counts: snr = 118.384517
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.079708 pixels
  Position = (1144.3, 823.0) = 0 39 48.76 3 22 17.6
  Extent = 2.3 (2.3-2.4)", rotation angle = 0
  Source counts = 1720.4 +/- 43.9
  Background counts = 211.2
  Rate = 0.02 +/- 0.0005
[Mon Oct  3 02:59:05 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 02:59:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 02:59:05 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 02:59:05 2011] Source does appear to be extended
[Mon Oct  3 02:59:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 02:59:58 2011] Not overwriting source region fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2_src.reg
[Mon Oct  3 02:59:58 2011] Extracting stamp from image fullrun_ccd3_acisf11389_pi14-548_cl_sm2.00.img.gz, (1037, 716) - (1251, 930)
[Mon Oct  3 02:59:58 2011] Writing fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2.gif
[Mon Oct  3 02:59:59 2011] ../../acisf11389/products/events/fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2_src.evt and ../../acisf11389/products/events/fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct  3 02:59:59 2011] Size of ../../acisf11389/products/events/fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2_src.evt.gz[events] = 1898 counts
[Mon Oct  3 02:59:59 2011] Mean chipx,y = (121.00, 833.96)
[Mon Oct  3 02:59:59 2011] Mean tdetx,y = (4298.04, 3182.00)
[Mon Oct  3 02:59:59 2011] chipx,y range = (90.00-156.00, 800.00-864.00)
[Mon Oct  3 02:59:59 2011] Size of ../../acisf11389/products/events/fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 343 counts
[Mon Oct  3 02:59:59 2011] ../../acisf11389/products/images/fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2_src.img and ../../acisf11389/products/images/fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct  3 02:59:59 2011] ../../acisf11389/products/spectra/fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2_src.pi and ../../acisf11389/products/spectra/fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Oct  3 03:00:01 2011] ../../acisf11389/products/lightcurves/fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2_src.lc and ../../acisf11389/products/lightcurves/fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct  3 03:00:39 2011] Keeping rmf generated by specextract
[Mon Oct  3 03:00:39 2011] 171.614
[Mon Oct  3 03:04:31 2011] Updating aperture counts using extracted products
[Mon Oct  3 03:04:31 2011] Error reading totcts from fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Oct  3 03:04:31 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 03:04:31 2011] Using photon index=1.80, rate=0.0183, arf fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2.arf
[Mon Oct  3 03:04:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 03:04:31 2011] Updating source flux to 2.5e-13
[Mon Oct  3 03:05:04 2011] Reading fit data from acisf11389/analysis//spectral/fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2_pl.csv
[Mon Oct  3 03:05:04 2011] Spectral fit parameter nH value = 7.02897e+12
[Mon Oct  3 03:05:04 2011] Spectral fit parameter PhoIndex value = 2.14857
[Mon Oct  3 03:05:04 2011] Failed to get F(0.3-8.0) from acisf11389/analysis//spectral/fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Oct  3 03:05:04 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 03:05:04 2011] Using Nh = 7e+12, photon index=2.15, rate=0.0183, arf fullrun_ccd3_acisf11389_pi14-548_pass1_cl_src2.arf
[Mon Oct  3 03:05:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 03:05:04 2011] Updating source flux to 2.6e-13