[Tue Oct  4 06:22:57 2011] Detection parameters:
  Position = (928.2, 974.5) = 9 50 3.47 28 1 4.6
  Extent = 0.5" x 0.5", rotation angle = 61 degrees
  Source counts = 16.6 +/- 4.1
  Background counts = 0.4
  Rate = 0.002 +/- 0.0005

[Tue Oct  4 06:22:59 2011] Off-axis axis estimate = 1.40'
[Tue Oct  4 06:24:01 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 06:24:01 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Tue Oct  4 06:24:01 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.904
[Tue Oct  4 06:24:01 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.39"
[Tue Oct  4 06:24:02 2011] fullrun_ccd7_acisf11376_pi14-548_cl_pass0_src3.ximg exists
[Tue Oct  4 06:24:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11376_pi14-548_cl_pass0_src3.csv
[Tue Oct  4 06:24:02 2011] fullrun_ccd7_acisf11376_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Oct  4 06:24:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11376_pi14-548_cl_pass0_src3.csv
[Tue Oct  4 06:24:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11376_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11376_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 06:24:03 2011] fullrun_ccd7_acisf11376_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Oct  4 06:24:03 2011] fullrun_ccd7_acisf11376_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Oct  4 06:24:03 2011] Fit fullrun_ccd7_acisf11376_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Oct  4 06:24:10 2011] Spatial fit model total counts = 17.031100, observed total counts = 17.000000
[Tue Oct  4 06:24:10 2011] Offset between fit and detection position for source 4 = 0.650470 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.650470 pixels
  Position = (928.7, 975.0) = 9 50 3.47 28 1 4.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 17.0 +/- 4.1
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Tue Oct  4 06:24:10 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 06:24:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 06:24:10 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 06:24:10 2011] Source does appear to be extended
[Tue Oct  4 06:24:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 06:24:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 06:24:29 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Tue Oct  4 06:24:29 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.971
[Tue Oct  4 06:24:29 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.50"
[Tue Oct  4 06:24:30 2011] fullrun_ccd7_acisf11376_pi14-548_cl_pass1_src3.ximg exists
[Tue Oct  4 06:24:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11376_pi14-548_cl_pass1_src3.csv
[Tue Oct  4 06:24:30 2011] fullrun_ccd7_acisf11376_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Oct  4 06:24:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11376_pi14-548_cl_pass1_src3.csv
[Tue Oct  4 06:24:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11376_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11376_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 06:24:30 2011] fullrun_ccd7_acisf11376_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Oct  4 06:24:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11376_pi14-548_cl_pass1_tfrozen_src3.csv
[Tue Oct  4 06:24:30 2011] fullrun_ccd7_acisf11376_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Oct  4 06:24:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11376_pi14-548_cl_pass1_tfrozen_src3.csv
[Tue Oct  4 06:24:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11376_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11376_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 06:24:37 2011] Spatial fit model total counts = 15.821600, observed total counts = 17.000000
[Tue Oct  4 06:24:37 2011] Offset between fit and detection position for source 4 = 0.067352 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.067352 pixels
  Position = (928.7, 975.0) = 9 50 3.47 28 1 4.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 15.8 +/- 4.0
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Tue Oct  4 06:24:37 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 06:24:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 06:24:37 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 06:24:37 2011] Source does appear to be extended
[Tue Oct  4 06:24:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 06:26:44 2011] Not overwriting source region fullrun_ccd7_acisf11376_pi14-548_pass1_cl_src4_src.reg
[Tue Oct  4 06:26:44 2011] Extracting stamp from image fullrun_ccd7_acisf11376_pi14-548_cl_sm2.00.img.gz, (905, 951) - (952, 999)
[Tue Oct  4 06:26:44 2011] Writing fullrun_ccd7_acisf11376_pi14-548_pass1_cl_src4.gif
[Tue Oct  4 06:27:27 2011] ../../acisf11376/products/events/fullrun_ccd7_acisf11376_pi14-548_pass1_cl_src4_src.evt and ../../acisf11376/products/events/fullrun_ccd7_acisf11376_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue Oct  4 06:27:27 2011] Size of ../../acisf11376/products/events/fullrun_ccd7_acisf11376_pi14-548_pass1_cl_src4_src.evt.gz[events] = 17 counts
[Tue Oct  4 06:27:27 2011] Mean chipx,y = (122.71, 342.18)
[Tue Oct  4 06:27:27 2011] Mean tdetx,y = (4039.71, 2044.18)
[Tue Oct  4 06:27:27 2011] chipx,y range = (108.00-137.00, 324.00-356.00)
[Tue Oct  4 06:27:27 2011] Size of ../../acisf11376/products/events/fullrun_ccd7_acisf11376_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 2 counts
[Tue Oct  4 06:27:27 2011] ../../acisf11376/products/images/fullrun_ccd7_acisf11376_pi14-548_pass1_cl_src4_src.img and ../../acisf11376/products/images/fullrun_ccd7_acisf11376_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue Oct  4 06:27:27 2011] ../../acisf11376/products/spectra/fullrun_ccd7_acisf11376_pi14-548_pass1_cl_src4_src.pi and ../../acisf11376/products/spectra/fullrun_ccd7_acisf11376_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue Oct  4 06:27:27 2011] Not generating rmf since there are only 15 counts
[Tue Oct  4 06:28:14 2011] ../../acisf11376/products/lightcurves/fullrun_ccd7_acisf11376_pi14-548_pass1_cl_src4_src.lc and ../../acisf11376/products/lightcurves/fullrun_ccd7_acisf11376_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue Oct  4 06:36:24 2011] 231.757
[Tue Oct  4 06:36:28 2011] Updating aperture counts using extracted products
[Tue Oct  4 06:36:28 2011] Error reading totcts from fullrun_ccd7_acisf11376_pi14-548_pass1_cl_src4_src.pi.gz
[Tue Oct  4 06:36:28 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 06:36:28 2011] Using photon index=1.80, rate=0.00195, arf fullrun_ccd7_acisf11376_pi14-548_pass1_cl_src4.arf
[Tue Oct  4 06:36:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct  4 06:36:28 2011] Updating source flux to 1.5e-14
[Tue Oct  4 06:36:41 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct  4 06:36:42 2011] acisf11376/analysis//spectral/fullrun_ccd7_acisf11376_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete