[Sat Oct 29 18:02:44 2011] Detection parameters:
  Position = (638.3, 775.6) = 10 51 54.92 71 50 1.8
  Extent = 0.9" x 0.5", rotation angle = 24 degrees
  Source counts = 275.7 +/- 16.7
  Background counts = 2.3
  Rate = 0.04 +/- 0.002

[Sat Oct 29 18:02:45 2011] Off-axis axis estimate = 3.96'
[Sat Oct 29 18:03:15 2011] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 18:03:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 18:03:15 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Sat Oct 29 18:03:15 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.072
[Sat Oct 29 18:03:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.82"
[Sat Oct 29 18:03:16 2011] fullrun_ccd7_acisf11370_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 29 18:03:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11370_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 18:03:16 2011] fullrun_ccd7_acisf11370_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 29 18:03:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11370_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 18:03:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11370_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11370_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 18:03:16 2011] fullrun_ccd7_acisf11370_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 29 18:03:16 2011] fullrun_ccd7_acisf11370_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 29 18:03:16 2011] Fit fullrun_ccd7_acisf11370_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 29 18:03:21 2011] Spatial fit model total counts = 274.067000, observed total counts = 279.000000
[Sat Oct 29 18:03:21 2011] Offset between fit and detection position for source 1 = 0.570277 pixels
[Sat Oct 29 18:03:21 2011] 275.777700 total counts/ 5.142700 bgd. counts: snr = 119.340641
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.570277 pixels
  Position = (638.7, 776.1) = 10 51 54.94 71 50 1.8
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 270.6 +/- 16.6
  Background counts = 5.1
  Rate = 0.04 +/- 0.002
[Sat Oct 29 18:03:21 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 18:03:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 18:03:21 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 18:03:21 2011] Source does appear to be extended
[Sat Oct 29 18:03:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 18:03:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 18:03:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 18:03:37 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Sat Oct 29 18:03:37 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.904
[Sat Oct 29 18:03:37 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.91"
[Sat Oct 29 18:03:37 2011] fullrun_ccd7_acisf11370_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 29 18:03:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11370_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 18:03:37 2011] fullrun_ccd7_acisf11370_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 29 18:03:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11370_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 18:03:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11370_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11370_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 18:03:37 2011] fullrun_ccd7_acisf11370_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 29 18:03:37 2011] fullrun_ccd7_acisf11370_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 29 18:03:37 2011] Fit fullrun_ccd7_acisf11370_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 29 18:03:41 2011] Spatial fit model total counts = 274.507000, observed total counts = 278.000000
[Sat Oct 29 18:03:41 2011] Offset between fit and detection position for source 1 = 0.055621 pixels
[Sat Oct 29 18:03:41 2011] 275.671188 total counts/ 0.867188 bgd. counts: snr = 295.098105
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.055621 pixels
  Position = (638.7, 776.1) = 10 51 54.93 71 50 1.8
  Extent = 0.9 (0.9-1.0)", rotation angle = 0
  Source counts = 274.8 +/- 16.6
  Background counts = 0.9
  Rate = 0.04 +/- 0.002
[Sat Oct 29 18:03:41 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 18:03:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 18:03:41 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 18:03:41 2011] Source does appear to be extended
[Sat Oct 29 18:03:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 18:04:05 2011] Not overwriting source region fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 29 18:04:05 2011] Extracting stamp from image fullrun_ccd7_acisf11370_pi14-548_cl_sm2.00.img.gz, (597, 734) - (681, 818)
[Sat Oct 29 18:04:05 2011] Writing fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1.gif
[Sat Oct 29 18:04:06 2011] ../../acisf11370/products/events/fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1_src.evt and ../../acisf11370/products/events/fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 29 18:04:06 2011] Size of ../../acisf11370/products/events/fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1_src.evt.gz[events] = 276 counts
[Sat Oct 29 18:04:06 2011] Mean chipx,y = (668.64, 479.80)
[Sat Oct 29 18:04:06 2011] Mean tdetx,y = (4585.64, 2181.80)
[Sat Oct 29 18:04:06 2011] chipx,y range = (649.00-692.00, 460.00-501.00)
[Sat Oct 29 18:04:06 2011] Size of ../../acisf11370/products/events/fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 15 counts
[Sat Oct 29 18:04:06 2011] ../../acisf11370/products/images/fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1_src.img and ../../acisf11370/products/images/fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 29 18:04:06 2011] ../../acisf11370/products/spectra/fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1_src.pi and ../../acisf11370/products/spectra/fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 29 18:04:09 2011] ../../acisf11370/products/lightcurves/fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1_src.lc and ../../acisf11370/products/lightcurves/fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 29 18:04:48 2011] Keeping rmf generated by specextract
[Sat Oct 29 18:04:48 2011] 224.207
[Sat Oct 29 18:04:51 2011] Updating aperture counts using extracted products
[Sat Oct 29 18:04:51 2011] Error reading totcts from fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 29 18:04:51 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 18:04:51 2011] Using photon index=1.80, rate=0.0364, arf fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1.arf
[Sat Oct 29 18:04:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 18:04:51 2011] Updating source flux to 2.8e-13
[Sat Oct 29 18:04:59 2011] Reading fit data from acisf11370/analysis//spectral/fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 29 18:04:59 2011] Spectral fit parameter nH value = 1.49796e+21
[Sat Oct 29 18:04:59 2011] Spectral fit parameter PhoIndex value = 1.90115
[Sat Oct 29 18:04:59 2011] Failed to get F(0.3-8.0) from acisf11370/analysis//spectral/fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 29 18:04:59 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 18:04:59 2011] Using Nh = 1.5e+21, photon index=1.90, rate=0.0364, arf fullrun_ccd7_acisf11370_pi14-548_pass1_cl_src1.arf
[Sat Oct 29 18:04:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 18:04:59 2011] Updating source flux to 2.8e-13