[Sun Oct  2 00:45:09 2011] Detection parameters:
  Position = (1069.1, 732.9) = 12 41 16.20 74 27 30.7
  Extent = 0.5" x 0.5", rotation angle = 35 degrees
  Source counts = 137.1 +/- 11.7
  Background counts = 0.9
  Rate = 0.01 +/- 0.001

[Sun Oct  2 00:45:10 2011] Off-axis axis estimate = 3.18'
[Sun Oct  2 00:45:49 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 00:45:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  2 00:45:49 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sun Oct  2 00:45:49 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.300
[Sun Oct  2 00:45:49 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.62"
[Sun Oct  2 00:45:49 2011] fullrun_ccd7_acisf11362_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct  2 00:45:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11362_pi14-548_cl_pass0_src1.csv
[Sun Oct  2 00:45:49 2011] fullrun_ccd7_acisf11362_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct  2 00:45:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11362_pi14-548_cl_pass0_src1.csv
[Sun Oct  2 00:45:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11362_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11362_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 00:45:50 2011] fullrun_ccd7_acisf11362_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct  2 00:45:50 2011] fullrun_ccd7_acisf11362_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct  2 00:45:50 2011] Fit fullrun_ccd7_acisf11362_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct  2 00:45:55 2011] Spatial fit model total counts = 139.856000, observed total counts = 140.000000
[Sun Oct  2 00:45:55 2011] Offset between fit and detection position for source 1 = 0.670302 pixels
[Sun Oct  2 00:45:55 2011] 140.653500 total counts/ 10.461500 bgd. counts: snr = 40.251987
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.670302 pixels
  Position = (1069.6, 733.4) = 12 41 16.21 74 27 30.7
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 130.2 +/- 11.9
  Background counts = 10.5
  Rate = 0.01 +/- 0.001
[Sun Oct  2 00:45:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 00:45:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 00:45:55 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 00:45:55 2011] Source does appear to be extended
[Sun Oct  2 00:45:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 00:46:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 00:46:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  2 00:46:12 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Sun Oct  2 00:46:12 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.771
[Sun Oct  2 00:46:12 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.59"
[Sun Oct  2 00:46:13 2011] fullrun_ccd7_acisf11362_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct  2 00:46:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11362_pi14-548_cl_pass1_src1.csv
[Sun Oct  2 00:46:13 2011] fullrun_ccd7_acisf11362_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct  2 00:46:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11362_pi14-548_cl_pass1_src1.csv
[Sun Oct  2 00:46:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11362_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11362_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 00:46:13 2011] fullrun_ccd7_acisf11362_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct  2 00:46:13 2011] fullrun_ccd7_acisf11362_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct  2 00:46:13 2011] Fit fullrun_ccd7_acisf11362_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct  2 00:46:19 2011] Spatial fit model total counts = 140.000000, observed total counts = 140.000000
[Sun Oct  2 00:46:19 2011] Offset between fit and detection position for source 1 = 0.014422 pixels
[Sun Oct  2 00:46:19 2011] 140.573440 total counts/ 9.472440 bgd. counts: snr = 42.596613
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014422 pixels
  Position = (1069.6, 733.4) = 12 41 16.21 74 27 30.7
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 131.1 +/- 11.9
  Background counts = 9.5
  Rate = 0.01 +/- 0.001
[Sun Oct  2 00:46:19 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 00:46:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 00:46:19 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 00:46:19 2011] Source does appear to be extended
[Sun Oct  2 00:46:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 00:46:57 2011] Not overwriting source region fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1_src.reg
[Sun Oct  2 00:46:57 2011] Extracting stamp from image fullrun_ccd7_acisf11362_pi14-548_cl_sm2.00.img.gz, (1042, 706) - (1097, 761)
[Sun Oct  2 00:46:57 2011] Writing fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1.gif
[Sun Oct  2 00:46:58 2011] ../../acisf11362/products/events/fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1_src.evt and ../../acisf11362/products/events/fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct  2 00:46:58 2011] Size of ../../acisf11362/products/events/fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1_src.evt.gz[events] = 135 counts
[Sun Oct  2 00:46:58 2011] Mean chipx,y = (358.31, 859.46)
[Sun Oct  2 00:46:58 2011] Mean tdetx,y = (4275.31, 2561.46)
[Sun Oct  2 00:46:58 2011] chipx,y range = (340.00-375.00, 841.00-879.00)
[Sun Oct  2 00:46:58 2011] Size of ../../acisf11362/products/events/fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 6 counts
[Sun Oct  2 00:46:58 2011] ../../acisf11362/products/images/fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1_src.img and ../../acisf11362/products/images/fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct  2 00:46:58 2011] ../../acisf11362/products/spectra/fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1_src.pi and ../../acisf11362/products/spectra/fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct  2 00:47:01 2011] ../../acisf11362/products/lightcurves/fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1_src.lc and ../../acisf11362/products/lightcurves/fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct  2 00:47:51 2011] Keeping rmf generated by specextract
[Sun Oct  2 00:47:51 2011] 226.416
[Sun Oct  2 00:48:02 2011] Updating aperture counts using extracted products
[Sun Oct  2 00:48:02 2011] Error reading totcts from fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct  2 00:48:02 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 00:48:02 2011] Using photon index=1.80, rate=0.012, arf fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1.arf
[Sun Oct  2 00:48:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 00:48:02 2011] Updating source flux to 9.5e-14
[Sun Oct  2 00:48:10 2011] Reading fit data from acisf11362/analysis//spectral/fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct  2 00:48:10 2011] Spectral fit parameter nH value = 2.47806e+13
[Sun Oct  2 00:48:10 2011] Spectral fit parameter PhoIndex value = 1.79636
[Sun Oct  2 00:48:10 2011] Failed to get F(0.3-8.0) from acisf11362/analysis//spectral/fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct  2 00:48:10 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 00:48:10 2011] Using Nh = 2.5e+13, photon index=1.80, rate=0.012, arf fullrun_ccd7_acisf11362_pi14-548_pass1_cl_src1.arf
[Sun Oct  2 00:48:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 00:48:10 2011] Updating source flux to 9.6e-14