[Tue Sep 27 07:12:31 2011] Detection parameters:
  Position = (548.7, 817.6) = 13 31 29.00 2 6 51.2
  Extent = 0.6" x 0.6", rotation angle = 88 degrees
  Source counts = 25.4 +/- 5.1
  Background counts = 0.6
  Rate = 0.004 +/- 0.0008

[Tue Sep 27 07:12:31 2011] Off-axis axis estimate = 4.34'
[Tue Sep 27 07:13:12 2011] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 07:13:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 07:13:12 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Tue Sep 27 07:13:12 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.078
[Tue Sep 27 07:13:12 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.94"
[Tue Sep 27 07:13:13 2011] fullrun_ccd6_acisf11333_pi14-548_cl_pass0_src1.ximg exists
[Tue Sep 27 07:13:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11333_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 07:13:13 2011] fullrun_ccd6_acisf11333_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Sep 27 07:13:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11333_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 07:13:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11333_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11333_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 07:13:13 2011] fullrun_ccd6_acisf11333_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 07:13:13 2011] fullrun_ccd6_acisf11333_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 07:13:13 2011] Fit fullrun_ccd6_acisf11333_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 07:13:16 2011] Spatial fit model total counts = 27.166500, observed total counts = 28.000000
[Tue Sep 27 07:13:16 2011] Offset between fit and detection position for source 4 = 0.592484 pixels
[Tue Sep 27 07:13:16 2011] 28.053200 total counts/ 0.000000 bgd. counts: snr = 1463537876772.614014
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.592484 pixels
  Position = (548.8, 818.2) = 13 31 29.02 2 6 51.2
  Extent = 1.2 (0.9-1.4)", rotation angle = 0
  Source counts = 28.1 +/- 5.3
  Background counts = 0.0
  Rate = 0.004 +/- 0.0008
[Tue Sep 27 07:13:16 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:13:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:13:16 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 07:13:16 2011] Source does appear to be extended
[Tue Sep 27 07:13:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:13:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 07:13:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 07:13:31 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Tue Sep 27 07:13:31 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.090
[Tue Sep 27 07:13:31 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.17"
[Tue Sep 27 07:13:31 2011] fullrun_ccd6_acisf11333_pi14-548_cl_pass1_src1.ximg exists
[Tue Sep 27 07:13:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11333_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 07:13:31 2011] fullrun_ccd6_acisf11333_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Sep 27 07:13:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11333_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 07:13:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11333_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11333_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 07:13:32 2011] fullrun_ccd6_acisf11333_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 07:13:32 2011] fullrun_ccd6_acisf11333_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 07:13:32 2011] Fit fullrun_ccd6_acisf11333_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 07:13:36 2011] Spatial fit model total counts = 27.894900, observed total counts = 29.000000
[Tue Sep 27 07:13:36 2011] Offset between fit and detection position for source 4 = 0.070653 pixels
[Tue Sep 27 07:13:36 2011] 28.867300 total counts/ 0.000000 bgd. counts: snr = 342102387109843.375000
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.070653 pixels
  Position = (548.7, 818.3) = 13 31 29.02 2 6 51.3
  Extent = 1.2 (0.9-1.4)", rotation angle = 0
  Source counts = 28.9 +/- 5.4
  Background counts = 0.0
  Rate = 0.004 +/- 0.0008
[Tue Sep 27 07:13:36 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:13:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:13:36 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 07:13:36 2011] Source does appear to be extended
[Tue Sep 27 07:13:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:13:53 2011] Not overwriting source region fullrun_ccd6_acisf11333_pi14-548_pass1_cl_src4_src.reg
[Tue Sep 27 07:13:53 2011] Extracting stamp from image fullrun_ccd6_acisf11333_pi14-548_cl_sm2.00.img.gz, (496, 765) - (602, 871)
[Tue Sep 27 07:13:53 2011] Writing fullrun_ccd6_acisf11333_pi14-548_pass1_cl_src4.gif
[Tue Sep 27 07:13:54 2011] ../../acisf11333/products/events/fullrun_ccd6_acisf11333_pi14-548_pass1_cl_src4_src.evt and ../../acisf11333/products/events/fullrun_ccd6_acisf11333_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue Sep 27 07:13:54 2011] Size of ../../acisf11333/products/events/fullrun_ccd6_acisf11333_pi14-548_pass1_cl_src4_src.evt.gz[events] = 29 counts
[Tue Sep 27 07:13:54 2011] Mean chipx,y = (707.86, 499.24)
[Tue Sep 27 07:13:54 2011] Mean tdetx,y = (3582.86, 2201.24)
[Tue Sep 27 07:13:54 2011] chipx,y range = (689.00-722.00, 477.00-516.00)
[Tue Sep 27 07:13:54 2011] Size of ../../acisf11333/products/events/fullrun_ccd6_acisf11333_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 7 counts
[Tue Sep 27 07:13:54 2011] ../../acisf11333/products/images/fullrun_ccd6_acisf11333_pi14-548_pass1_cl_src4_src.img and ../../acisf11333/products/images/fullrun_ccd6_acisf11333_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue Sep 27 07:13:54 2011] ../../acisf11333/products/spectra/fullrun_ccd6_acisf11333_pi14-548_pass1_cl_src4_src.pi and ../../acisf11333/products/spectra/fullrun_ccd6_acisf11333_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue Sep 27 07:13:54 2011] Not generating rmf since there are only 28 counts
[Tue Sep 27 07:13:59 2011] ../../acisf11333/products/lightcurves/fullrun_ccd6_acisf11333_pi14-548_pass1_cl_src4_src.lc and ../../acisf11333/products/lightcurves/fullrun_ccd6_acisf11333_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue Sep 27 07:14:21 2011] 201.442
[Tue Sep 27 07:15:44 2011] Updating aperture counts using extracted products
[Tue Sep 27 07:15:44 2011] Error reading totcts from fullrun_ccd6_acisf11333_pi14-548_pass1_cl_src4_src.pi.gz
[Tue Sep 27 07:15:44 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 07:15:44 2011] Using photon index=1.80, rate=0.00434, arf fullrun_ccd6_acisf11333_pi14-548_pass1_cl_src4.arf
[Tue Sep 27 07:15:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 07:15:44 2011] Updating source flux to 4.8e-14
[Tue Sep 27 07:15:50 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Sep 27 07:15:51 2011] acisf11333/analysis//spectral/fullrun_ccd6_acisf11333_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete