[Fri Oct 28 05:10:42 2011] Detection parameters:
  Position = (463.4, 750.3) = 14 29 40.76 3 21 26.7
  Extent = 2.2" x 1.7", rotation angle = 130 degrees
  Source counts = 427.5 +/- 21.3
  Background counts = 26.5
  Rate = 0.04 +/- 0.002

[Fri Oct 28 05:10:42 2011] Off-axis axis estimate = 7.21'
[Fri Oct 28 05:11:14 2011] Using EEF radius (= 2.31 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 05:11:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 05:11:14 2011] Initial guess for spatial extent in simple fitting = 2.31"
[Fri Oct 28 05:11:14 2011] source mask rpix=4.7, npix_max = 108, mask sum = 110, frac = 1.018
[Fri Oct 28 05:11:14 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.31"
[Fri Oct 28 05:11:15 2011] fullrun_ccd6_acisf11313_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 28 05:11:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11313_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 05:11:15 2011] fullrun_ccd6_acisf11313_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 28 05:11:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11313_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 05:11:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11313_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11313_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 05:11:15 2011] fullrun_ccd6_acisf11313_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 28 05:11:15 2011] fullrun_ccd6_acisf11313_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 28 05:11:15 2011] Fit fullrun_ccd6_acisf11313_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 28 05:11:19 2011] Spatial fit model total counts = 459.089000, observed total counts = 461.000000
[Fri Oct 28 05:11:19 2011] Offset between fit and detection position for source 1 = 0.785488 pixels
[Fri Oct 28 05:11:19 2011] 458.803260 total counts/ 4.635260 bgd. counts: snr = 210.949977
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.785488 pixels
  Position = (464.1, 750.2) = 14 29 40.75 3 21 26.4
  Extent = 2.9 (2.7-3.1)", rotation angle = 0
  Source counts = 454.2 +/- 21.4
  Background counts = 4.6
  Rate = 0.05 +/- 0.002
[Fri Oct 28 05:11:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 05:11:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 05:11:19 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 05:11:19 2011] Source does appear to be extended
[Fri Oct 28 05:11:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 05:11:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 05:11:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 05:11:31 2011] Initial guess for spatial extent in simple fitting = 2.94"
[Fri Oct 28 05:11:31 2011] source mask rpix=6.0, npix_max = 167, mask sum = 169, frac = 1.008
[Fri Oct 28 05:11:31 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.94"
[Fri Oct 28 05:11:31 2011] fullrun_ccd6_acisf11313_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 28 05:11:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11313_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 05:11:31 2011] fullrun_ccd6_acisf11313_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 28 05:11:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11313_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 05:11:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11313_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11313_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 05:11:32 2011] fullrun_ccd6_acisf11313_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 28 05:11:32 2011] fullrun_ccd6_acisf11313_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 28 05:11:32 2011] Fit fullrun_ccd6_acisf11313_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 28 05:11:36 2011] Spatial fit model total counts = 462.595000, observed total counts = 467.000000
[Fri Oct 28 05:11:36 2011] Offset between fit and detection position for source 1 = 0.081244 pixels
[Fri Oct 28 05:11:36 2011] 462.613062 total counts/ 0.707062 bgd. counts: snr = 549.319296
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.081244 pixels
  Position = (464.2, 750.1) = 14 29 40.75 3 21 26.4
  Extent = 3.0 (2.8-3.2)", rotation angle = 0
  Source counts = 461.9 +/- 21.5
  Background counts = 0.7
  Rate = 0.05 +/- 0.002
[Fri Oct 28 05:11:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 05:11:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 05:11:36 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 05:11:36 2011] Source does appear to be extended
[Fri Oct 28 05:11:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 05:11:48 2011] Not overwriting source region fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 28 05:11:48 2011] Extracting stamp from image fullrun_ccd6_acisf11313_pi14-548_cl_sm2.00.img.gz, (326, 612) - (603, 889)
[Fri Oct 28 05:11:48 2011] Writing fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1.gif
[Fri Oct 28 05:11:49 2011] ../../acisf11313/products/events/fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1_src.evt and ../../acisf11313/products/events/fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 28 05:11:49 2011] Size of ../../acisf11313/products/events/fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1_src.evt.gz[events] = 466 counts
[Fri Oct 28 05:11:49 2011] Mean chipx,y = (359.99, 657.43)
[Fri Oct 28 05:11:49 2011] Mean tdetx,y = (3234.99, 2359.43)
[Fri Oct 28 05:11:49 2011] chipx,y range = (327.00-395.00, 627.00-693.00)
[Fri Oct 28 05:11:49 2011] Size of ../../acisf11313/products/events/fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 84 counts
[Fri Oct 28 05:11:49 2011] ../../acisf11313/products/images/fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1_src.img and ../../acisf11313/products/images/fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 28 05:11:49 2011] ../../acisf11313/products/spectra/fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1_src.pi and ../../acisf11313/products/spectra/fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 28 05:11:52 2011] ../../acisf11313/products/lightcurves/fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1_src.lc and ../../acisf11313/products/lightcurves/fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 28 05:12:07 2011] Keeping rmf generated by specextract
[Fri Oct 28 05:12:07 2011] 158.428
[Fri Oct 28 05:13:00 2011] Updating aperture counts using extracted products
[Fri Oct 28 05:13:00 2011] Error reading totcts from fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 28 05:13:00 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 05:13:00 2011] Using photon index=1.80, rate=0.0465, arf fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1.arf
[Fri Oct 28 05:13:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 05:13:00 2011] Updating source flux to 6.3e-13
[Fri Oct 28 05:13:07 2011] Reading fit data from acisf11313/analysis//spectral/fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 28 05:13:07 2011] Spectral fit parameter nH value = 1.19298e+19
[Fri Oct 28 05:13:07 2011] Spectral fit parameter PhoIndex value = 2.05833
[Fri Oct 28 05:13:07 2011] Failed to get F(0.3-8.0) from acisf11313/analysis//spectral/fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 28 05:13:07 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 05:13:07 2011] Using Nh = 1.2e+19, photon index=2.06, rate=0.0465, arf fullrun_ccd6_acisf11313_pi14-548_pass1_cl_src1.arf
[Fri Oct 28 05:13:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 05:13:07 2011] Updating source flux to 6.2e-13