[Mon Sep 26 21:25:28 2011] Detection parameters:
  Position = (346.1, 760.5) = 12 10 18.52 50 20 33.2
  Extent = 3.4" x 2.7", rotation angle = 136 degrees
  Source counts = 46.7 +/- 8.7
  Background counts = 29.3
  Rate = 0.0008 +/- 0.0001

[Mon Sep 26 21:25:28 2011] Off-axis axis estimate = 9.21'
[Mon Sep 26 21:26:34 2011] Using EEF radius (= 3.75 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 21:26:34 2011] Initial guess for spatial extent in simple fitting = 3.75"
[Mon Sep 26 21:26:34 2011] source mask rpix=7.6, npix_max = 263, mask sum = 272, frac = 1.032
[Mon Sep 26 21:26:34 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.75"
[Mon Sep 26 21:26:34 2011] fullrun_ccd3_acisf11310_pi14-548_cl_pass0_src3.ximg exists
[Mon Sep 26 21:26:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11310_pi14-548_cl_pass0_src3.csv
[Mon Sep 26 21:26:34 2011] fullrun_ccd3_acisf11310_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Sep 26 21:26:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11310_pi14-548_cl_pass0_src3.csv
[Mon Sep 26 21:26:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11310_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11310_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 21:26:34 2011] fullrun_ccd3_acisf11310_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Sep 26 21:26:35 2011] fullrun_ccd3_acisf11310_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Sep 26 21:26:35 2011] Fit fullrun_ccd3_acisf11310_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Sep 26 21:26:43 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 40.816840 pixels away
[Mon Sep 26 21:26:43 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 21:26:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 21:26:43 2011] Assessing source extent using major
[Mon Sep 26 21:26:43 2011] Source does appear to be extended
[Mon Sep 26 21:26:43 2011] Computing asymmetry using major and minor axis, asym = 1.27
[Mon Sep 26 21:27:12 2011] Using EEF radius (= 3.75 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 21:27:12 2011] Initial guess for spatial extent in simple fitting = 3.75"
[Mon Sep 26 21:27:12 2011] source mask rpix=7.6, npix_max = 263, mask sum = 272, frac = 1.032
[Mon Sep 26 21:27:12 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 3.75"
[Mon Sep 26 21:27:13 2011] fullrun_ccd3_acisf11310_pi14-548_cl_pass1_src3.ximg exists
[Mon Sep 26 21:27:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11310_pi14-548_cl_pass1_src3.csv
[Mon Sep 26 21:27:13 2011] fullrun_ccd3_acisf11310_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Sep 26 21:27:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11310_pi14-548_cl_pass1_src3.csv
[Mon Sep 26 21:27:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11310_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11310_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 21:27:13 2011] fullrun_ccd3_acisf11310_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Sep 26 21:27:13 2011] fullrun_ccd3_acisf11310_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Sep 26 21:27:13 2011] Fit fullrun_ccd3_acisf11310_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Sep 26 21:27:25 2011] Spatial fit model total counts = 93.999800, observed total counts = 94.000000
[Mon Sep 26 21:27:25 2011] Offset between fit and detection position for source 3 = 2.035358 pixels
[Mon Sep 26 21:27:25 2011] 91.024200 total counts/ 46.349000 bgd. counts: snr = 6.562153
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.035358 pixels
  Position = (347.5, 759.1) = 12 10 18.48 50 20 32.2
  Extent = 2.8 (2.2-5.6)", rotation angle = 0
  Source counts = 44.7 +/- 9.5
  Background counts = 46.3
  Rate = 0.0008 +/- 0.0002
[Mon Sep 26 21:27:25 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 21:27:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 21:27:25 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 21:27:25 2011] Source does appear to be extended
[Mon Sep 26 21:27:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 21:28:08 2011] Not overwriting source region fullrun_ccd3_acisf11310_pi14-548_pass1_cl_src3_src.reg
[Mon Sep 26 21:28:08 2011] Extracting stamp from image fullrun_ccd3_acisf11310_pi14-548_cl_sm2.00.img.gz, (220, 632) - (475, 886)
[Mon Sep 26 21:28:08 2011] Writing fullrun_ccd3_acisf11310_pi14-548_pass1_cl_src3.gif
[Mon Sep 26 21:28:18 2011] ../../acisf11310/products/events/fullrun_ccd3_acisf11310_pi14-548_pass1_cl_src3_src.evt and ../../acisf11310/products/events/fullrun_ccd3_acisf11310_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Sep 26 21:28:18 2011] Size of ../../acisf11310/products/events/fullrun_ccd3_acisf11310_pi14-548_pass1_cl_src3_src.evt.gz[events] = 84 counts
[Mon Sep 26 21:28:18 2011] Mean chipx,y = (225.49, 753.69)
[Mon Sep 26 21:28:18 2011] Mean tdetx,y = (4378.31, 3286.49)
[Mon Sep 26 21:28:18 2011] chipx,y range = (189.00-259.00, 721.00-786.00)
[Mon Sep 26 21:28:19 2011] Size of ../../acisf11310/products/events/fullrun_ccd3_acisf11310_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 359 counts
[Mon Sep 26 21:28:19 2011] ../../acisf11310/products/images/fullrun_ccd3_acisf11310_pi14-548_pass1_cl_src3_src.img and ../../acisf11310/products/images/fullrun_ccd3_acisf11310_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Sep 26 21:28:19 2011] ../../acisf11310/products/spectra/fullrun_ccd3_acisf11310_pi14-548_pass1_cl_src3_src.pi and ../../acisf11310/products/spectra/fullrun_ccd3_acisf11310_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Sep 26 21:28:19 2011] Not generating rmf since there are only 44 counts
[Mon Sep 26 21:28:25 2011] ../../acisf11310/products/lightcurves/fullrun_ccd3_acisf11310_pi14-548_pass1_cl_src3_src.lc and ../../acisf11310/products/lightcurves/fullrun_ccd3_acisf11310_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Sep 26 21:28:37 2011] 167.841
[Mon Sep 26 21:32:33 2011] Updating aperture counts using extracted products
[Mon Sep 26 21:32:33 2011] Error reading totcts from fullrun_ccd3_acisf11310_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Sep 26 21:32:33 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 21:32:33 2011] Using photon index=1.80, rate=0.000754, arf fullrun_ccd3_acisf11310_pi14-548_pass1_cl_src3.arf
[Mon Sep 26 21:32:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 21:32:33 2011] Updating source flux to 1e-14
[Mon Sep 26 21:32:39 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep 26 21:32:40 2011] acisf11310/analysis//spectral/fullrun_ccd3_acisf11310_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete