[Wed Sep 28 03:59:23 2011] Detection parameters:
  Position = (787.6, 854.9) = 0 3 6.06 16 7 4.6
  Extent = 0.6" x 0.5", rotation angle = 52 degrees
  Source counts = 32.4 +/- 6.0
  Background counts = 3.6
  Rate = 0.0006 +/- 0.0001

[Wed Sep 28 03:59:25 2011] Off-axis axis estimate = 1.70'
[Wed Sep 28 04:00:29 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 04:00:29 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Sep 28 04:00:29 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.858
[Wed Sep 28 04:00:29 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.40"
[Wed Sep 28 04:00:33 2011] fullrun_ccd7_acisf11309_pi14-548_cl_pass0_src16.ximg exists
[Wed Sep 28 04:00:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11309_pi14-548_cl_pass0_src16.csv
[Wed Sep 28 04:00:33 2011] fullrun_ccd7_acisf11309_pi14-548_cl_pass0_src16_1.ximg exists
[Wed Sep 28 04:00:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11309_pi14-548_cl_pass0_src16.csv
[Wed Sep 28 04:00:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11309_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11309_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 04:00:34 2011] fullrun_ccd7_acisf11309_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Wed Sep 28 04:00:34 2011] fullrun_ccd7_acisf11309_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Sep 28 04:00:34 2011] Fit fullrun_ccd7_acisf11309_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Wed Sep 28 04:00:54 2011] Source 13 is offset by 2.845217 and -1.128386 pixels which is larger than
2 X fitted extent = 0.411199 x 0.411199, not incorporating fit results
[Wed Sep 28 04:00:54 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 04:00:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 04:00:54 2011] Assessing source extent using major
[Wed Sep 28 04:00:54 2011] Source does appear to be extended
[Wed Sep 28 04:00:54 2011] Computing asymmetry using major and minor axis, asym = 1.16
[Wed Sep 28 04:01:16 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 04:01:16 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Sep 28 04:01:16 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.858
[Wed Sep 28 04:01:16 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.40"
[Wed Sep 28 04:01:18 2011] fullrun_ccd7_acisf11309_pi14-548_cl_pass1_src16.ximg exists
[Wed Sep 28 04:01:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11309_pi14-548_cl_pass1_src16.csv
[Wed Sep 28 04:01:18 2011] fullrun_ccd7_acisf11309_pi14-548_cl_pass1_src16_1.ximg exists
[Wed Sep 28 04:01:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11309_pi14-548_cl_pass1_src16.csv
[Wed Sep 28 04:01:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11309_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11309_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 04:01:20 2011] fullrun_ccd7_acisf11309_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Wed Sep 28 04:01:20 2011] fullrun_ccd7_acisf11309_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Wed Sep 28 04:01:20 2011] Fit fullrun_ccd7_acisf11309_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Wed Sep 28 04:01:34 2011] Spatial fit model total counts = 85.670900, observed total counts = 87.000000
[Wed Sep 28 04:01:34 2011] Offset between fit and detection position for source 13 = 0.519293 pixels
[Wed Sep 28 04:01:34 2011] 88.272600 total counts/ 63.026300 bgd. counts: snr = 3.180071
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.519293 pixels
  Position = (787.9, 855.3) = 0 3 6.06 16 7 4.5
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 25.2 +/- 9.4
  Background counts = 63.0
  Rate = 0.0004 +/- 0.0002
[Wed Sep 28 04:01:34 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 04:01:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 04:01:34 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 04:01:34 2011] Source does appear to be extended
[Wed Sep 28 04:01:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 04:04:17 2011] Not overwriting source region fullrun_ccd7_acisf11309_pi14-548_pass1_cl_src13_src.reg
[Wed Sep 28 04:04:17 2011] Extracting stamp from image fullrun_ccd7_acisf11309_pi14-548_cl_sm2.00.img.gz, (772, 839) - (804, 871)
[Wed Sep 28 04:04:17 2011] Writing fullrun_ccd7_acisf11309_pi14-548_pass1_cl_src13.gif
[Wed Sep 28 04:05:17 2011] ../../acisf11309/products/events/fullrun_ccd7_acisf11309_pi14-548_pass1_cl_src13_src.evt and ../../acisf11309/products/events/fullrun_ccd7_acisf11309_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Wed Sep 28 04:05:17 2011] Size of ../../acisf11309/products/events/fullrun_ccd7_acisf11309_pi14-548_pass1_cl_src13_src.evt.gz[events] = 33 counts
[Wed Sep 28 04:05:17 2011] Mean chipx,y = (387.30, 570.42)
[Wed Sep 28 04:05:17 2011] Mean tdetx,y = (4304.30, 2272.42)
[Wed Sep 28 04:05:17 2011] chipx,y range = (371.00-405.00, 550.00-582.00)
[Wed Sep 28 04:05:17 2011] Size of ../../acisf11309/products/events/fullrun_ccd7_acisf11309_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 12 counts
[Wed Sep 28 04:05:17 2011] ../../acisf11309/products/images/fullrun_ccd7_acisf11309_pi14-548_pass1_cl_src13_src.img and ../../acisf11309/products/images/fullrun_ccd7_acisf11309_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Wed Sep 28 04:05:17 2011] ../../acisf11309/products/spectra/fullrun_ccd7_acisf11309_pi14-548_pass1_cl_src13_src.pi and ../../acisf11309/products/spectra/fullrun_ccd7_acisf11309_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Wed Sep 28 04:05:17 2011] Not generating rmf since there are only 25 counts
[Wed Sep 28 04:05:19 2011] ../../acisf11309/products/lightcurves/fullrun_ccd7_acisf11309_pi14-548_pass1_cl_src13_src.lc and ../../acisf11309/products/lightcurves/fullrun_ccd7_acisf11309_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Wed Sep 28 04:06:34 2011] 231.523
[Wed Sep 28 04:06:38 2011] Updating aperture counts using extracted products
[Wed Sep 28 04:06:38 2011] Error reading totcts from fullrun_ccd7_acisf11309_pi14-548_pass1_cl_src13_src.pi.gz
[Wed Sep 28 04:06:38 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 04:06:38 2011] Using photon index=1.80, rate=0.000433, arf fullrun_ccd7_acisf11309_pi14-548_pass1_cl_src13.arf
[Wed Sep 28 04:06:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 04:06:38 2011] Updating source flux to 3.2e-15
[Wed Sep 28 04:07:04 2011] Flag b found in src. 13 procflags, skipping spectral fitting
[Wed Sep 28 04:07:04 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting