[Wed Sep 28 03:59:20 2011] Detection parameters:
  Position = (307.7, 539.4) = 0 2 55.12 16 10 12.7
  Extent = 0.5" x 0.5", rotation angle = 91 degrees
  Source counts = 49.7 +/- 7.2
  Background counts = 2.3
  Rate = 0.0009 +/- 0.0001

[Wed Sep 28 03:59:22 2011] Off-axis axis estimate = 2.70'
[Wed Sep 28 04:00:24 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 04:00:24 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Wed Sep 28 04:00:24 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.919
[Wed Sep 28 04:00:24 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.52"
[Wed Sep 28 04:00:24 2011] fullrun_ccd6_acisf11309_pi14-548_cl_pass0_src2.ximg exists
[Wed Sep 28 04:00:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11309_pi14-548_cl_pass0_src2.csv
[Wed Sep 28 04:00:24 2011] fullrun_ccd6_acisf11309_pi14-548_cl_pass0_src2_1.ximg exists
[Wed Sep 28 04:00:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11309_pi14-548_cl_pass0_src2.csv
[Wed Sep 28 04:00:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11309_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11309_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 04:00:25 2011] fullrun_ccd6_acisf11309_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed Sep 28 04:00:25 2011] fullrun_ccd6_acisf11309_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Sep 28 04:00:25 2011] Fit fullrun_ccd6_acisf11309_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Sep 28 04:00:50 2011] Spatial fit model total counts = 46.691100, observed total counts = 52.000000
[Wed Sep 28 04:00:50 2011] Offset between fit and detection position for source 4 = 1.027550 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.027550 pixels
  Position = (308.3, 540.3) = 0 2 55.12 16 10 12.9
  Extent = 0.9 (0.8-1.2)" x 0.4 (0.3-0.5)", rotation angle = 94 (82-103) degrees
  Source counts = 48.2 +/- 6.9
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0001
[Wed Sep 28 04:00:50 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 04:00:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 04:00:50 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 04:00:50 2011] Source does appear to be extended
[Wed Sep 28 04:00:50 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.50
[Wed Sep 28 04:00:50 2011] Source is asymmetric
[Wed Sep 28 04:01:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 04:01:15 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Wed Sep 28 04:01:15 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.125
[Wed Sep 28 04:01:15 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.68"
[Wed Sep 28 04:01:16 2011] fullrun_ccd6_acisf11309_pi14-548_cl_pass1_src2.ximg exists
[Wed Sep 28 04:01:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11309_pi14-548_cl_pass1_src2.csv
[Wed Sep 28 04:01:16 2011] fullrun_ccd6_acisf11309_pi14-548_cl_pass1_src2_1.ximg exists
[Wed Sep 28 04:01:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11309_pi14-548_cl_pass1_src2.csv
[Wed Sep 28 04:01:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11309_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11309_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 04:01:16 2011] fullrun_ccd6_acisf11309_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed Sep 28 04:01:16 2011] fullrun_ccd6_acisf11309_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Sep 28 04:01:16 2011] Fit fullrun_ccd6_acisf11309_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Sep 28 04:01:28 2011] Spatial fit model total counts = 50.094300, observed total counts = 53.000000
[Wed Sep 28 04:01:28 2011] Offset between fit and detection position for source 4 = 0.338911 pixels
[Wed Sep 28 04:01:28 2011] 51.175483 total counts/ 0.225583 bgd. counts: snr = 107.272932
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.338911 pixels
  Position = (308.5, 540.0) = 0 2 55.11 16 10 12.8
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 50.9 +/- 7.2
  Background counts = 0.2
  Rate = 0.0009 +/- 0.0001
[Wed Sep 28 04:01:28 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 04:01:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 04:01:28 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 04:01:28 2011] Source does appear to be extended
[Wed Sep 28 04:01:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 04:03:11 2011] Not overwriting source region fullrun_ccd6_acisf11309_pi14-548_pass1_cl_src4_src.reg
[Wed Sep 28 04:03:11 2011] Extracting stamp from image fullrun_ccd6_acisf11309_pi14-548_cl_sm2.00.img.gz, (273, 504) - (344, 576)
[Wed Sep 28 04:03:11 2011] Writing fullrun_ccd6_acisf11309_pi14-548_pass1_cl_src4.gif
[Wed Sep 28 04:03:20 2011] ../../acisf11309/products/events/fullrun_ccd6_acisf11309_pi14-548_pass1_cl_src4_src.evt and ../../acisf11309/products/events/fullrun_ccd6_acisf11309_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Wed Sep 28 04:03:20 2011] Size of ../../acisf11309/products/events/fullrun_ccd6_acisf11309_pi14-548_pass1_cl_src4_src.evt.gz[events] = 52 counts
[Wed Sep 28 04:03:20 2011] Mean chipx,y = (940.90, 647.00)
[Wed Sep 28 04:03:20 2011] Mean tdetx,y = (3815.90, 2349.00)
[Wed Sep 28 04:03:20 2011] chipx,y range = (922.00-960.00, 629.00-668.00)
[Wed Sep 28 04:03:20 2011] Size of ../../acisf11309/products/events/fullrun_ccd6_acisf11309_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 37 counts
[Wed Sep 28 04:03:20 2011] ../../acisf11309/products/images/fullrun_ccd6_acisf11309_pi14-548_pass1_cl_src4_src.img and ../../acisf11309/products/images/fullrun_ccd6_acisf11309_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Wed Sep 28 04:03:20 2011] ../../acisf11309/products/spectra/fullrun_ccd6_acisf11309_pi14-548_pass1_cl_src4_src.pi and ../../acisf11309/products/spectra/fullrun_ccd6_acisf11309_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Wed Sep 28 04:03:20 2011] Not generating rmf since there are only 50 counts
[Wed Sep 28 04:03:24 2011] ../../acisf11309/products/lightcurves/fullrun_ccd6_acisf11309_pi14-548_pass1_cl_src4_src.lc and ../../acisf11309/products/lightcurves/fullrun_ccd6_acisf11309_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Wed Sep 28 04:04:16 2011] 209.427
[Wed Sep 28 04:06:37 2011] Updating aperture counts using extracted products
[Wed Sep 28 04:06:37 2011] Error reading totcts from fullrun_ccd6_acisf11309_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Sep 28 04:06:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 04:06:37 2011] Using photon index=1.80, rate=0.000873, arf fullrun_ccd6_acisf11309_pi14-548_pass1_cl_src4.arf
[Wed Sep 28 04:06:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 04:06:37 2011] Updating source flux to 9.2e-15
[Wed Sep 28 04:07:00 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting