[Sun Oct 16 00:09:34 2011] Detection parameters:
  Position = (498.7, 797.6) = 12 38 37.02 -68 27 21.6
  Extent = 0.6" x 0.5", rotation angle = 136 degrees
  Source counts = 12.0 +/- 3.6
  Background counts = 1.0
  Rate = 0.0002 +/- 7e-05

[Sun Oct 16 00:09:37 2011] Off-axis axis estimate = 5.61'
[Sun Oct 16 00:10:47 2011] Using EEF radius (= 1.44 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 00:10:47 2011] Initial guess for spatial extent in simple fitting = 1.44"
[Sun Oct 16 00:10:47 2011] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.038
[Sun Oct 16 00:10:47 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 1.44"
[Sun Oct 16 00:10:49 2011] fullrun_ccd3_acisf11308_pi14-548_cl_pass0_src26.ximg exists
[Sun Oct 16 00:10:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11308_pi14-548_cl_pass0_src26.csv
[Sun Oct 16 00:10:49 2011] fullrun_ccd3_acisf11308_pi14-548_cl_pass0_src26_1.ximg exists
[Sun Oct 16 00:10:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11308_pi14-548_cl_pass0_src26.csv
[Sun Oct 16 00:10:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11308_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11308_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 00:10:50 2011] fullrun_ccd3_acisf11308_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Sun Oct 16 00:10:50 2011] fullrun_ccd3_acisf11308_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Oct 16 00:10:50 2011] Fit fullrun_ccd3_acisf11308_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Sun Oct 16 00:11:05 2011] Spatial fit model total counts = 30.092700, observed total counts = 30.000000
[Sun Oct 16 00:11:05 2011] Offset between fit and detection position for source 18 = 2.177342 pixels
[Sun Oct 16 00:11:05 2011] 30.825300 total counts/ 12.706300 bgd. counts: snr = 5.083053
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 2.177342 pixels
  Position = (500.8, 797.9) = 12 38 36.87 -68 27 21.7
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 18.1 +/- 5.6
  Background counts = 12.7
  Rate = 0.0003 +/- 0.0001
[Sun Oct 16 00:11:05 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 00:11:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 00:11:05 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 00:11:05 2011] Source does appear to be extended
[Sun Oct 16 00:11:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 00:11:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 00:11:32 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Sun Oct 16 00:11:32 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Sun Oct 16 00:11:32 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 0.82"
[Sun Oct 16 00:11:34 2011] fullrun_ccd3_acisf11308_pi14-548_cl_pass1_src26.ximg exists
[Sun Oct 16 00:11:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11308_pi14-548_cl_pass1_src26.csv
[Sun Oct 16 00:11:34 2011] fullrun_ccd3_acisf11308_pi14-548_cl_pass1_src26_1.ximg exists
[Sun Oct 16 00:11:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11308_pi14-548_cl_pass1_src26.csv
[Sun Oct 16 00:11:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11308_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11308_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 00:11:34 2011] fullrun_ccd3_acisf11308_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Sun Oct 16 00:11:34 2011] fullrun_ccd3_acisf11308_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Oct 16 00:11:34 2011] Fit fullrun_ccd3_acisf11308_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Sun Oct 16 00:11:49 2011] Spatial fit model total counts = 29.360300, observed total counts = 29.000000
[Sun Oct 16 00:11:49 2011] Offset between fit and detection position for source 18 = 0.213288 pixels
[Sun Oct 16 00:11:49 2011] 29.053970 total counts/ 9.638670 bgd. counts: snr = 6.253678
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.213288 pixels
  Position = (501.0, 797.9) = 12 38 36.85 -68 27 21.7
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 19.4 +/- 5.4
  Background counts = 9.6
  Rate = 0.0004 +/- 0.0001
[Sun Oct 16 00:11:49 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 00:11:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 00:11:49 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 00:11:49 2011] Source does appear to be extended
[Sun Oct 16 00:11:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 00:15:48 2011] Not overwriting source region fullrun_ccd3_acisf11308_pi14-548_pass1_cl_src18_src.reg
[Sun Oct 16 00:15:48 2011] Extracting stamp from image fullrun_ccd3_acisf11308_pi14-548_cl_sm2.00.img.gz, (461, 758) - (541, 838)
[Sun Oct 16 00:15:48 2011] Writing fullrun_ccd3_acisf11308_pi14-548_pass1_cl_src18.gif
[Sun Oct 16 00:16:58 2011] ../../acisf11308/products/events/fullrun_ccd3_acisf11308_pi14-548_pass1_cl_src18_src.evt and ../../acisf11308/products/events/fullrun_ccd3_acisf11308_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sun Oct 16 00:16:58 2011] Size of ../../acisf11308/products/events/fullrun_ccd3_acisf11308_pi14-548_pass1_cl_src18_src.evt.gz[events] = 24 counts
[Sun Oct 16 00:16:58 2011] Mean chipx,y = (721.92, 384.04)
[Sun Oct 16 00:16:58 2011] Mean tdetx,y = (4747.96, 3782.92)
[Sun Oct 16 00:16:58 2011] chipx,y range = (705.00-738.00, 364.00-402.00)
[Sun Oct 16 00:16:58 2011] Size of ../../acisf11308/products/events/fullrun_ccd3_acisf11308_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 35 counts
[Sun Oct 16 00:16:58 2011] ../../acisf11308/products/images/fullrun_ccd3_acisf11308_pi14-548_pass1_cl_src18_src.img and ../../acisf11308/products/images/fullrun_ccd3_acisf11308_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Sun Oct 16 00:16:58 2011] ../../acisf11308/products/spectra/fullrun_ccd3_acisf11308_pi14-548_pass1_cl_src18_src.pi and ../../acisf11308/products/spectra/fullrun_ccd3_acisf11308_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sun Oct 16 00:16:58 2011] Not generating rmf since there are only 19 counts
[Sun Oct 16 00:17:01 2011] ../../acisf11308/products/lightcurves/fullrun_ccd3_acisf11308_pi14-548_pass1_cl_src18_src.lc and ../../acisf11308/products/lightcurves/fullrun_ccd3_acisf11308_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sun Oct 16 00:18:52 2011] 184.909
[Sun Oct 16 00:19:11 2011] Updating aperture counts using extracted products
[Sun Oct 16 00:19:11 2011] Error reading totcts from fullrun_ccd3_acisf11308_pi14-548_pass1_cl_src18_src.pi.gz
[Sun Oct 16 00:19:11 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 00:19:11 2011] Using photon index=1.80, rate=0.000361, arf fullrun_ccd3_acisf11308_pi14-548_pass1_cl_src18.arf
[Sun Oct 16 00:19:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 00:19:11 2011] Updating source flux to 4.5e-15
[Sun Oct 16 00:19:25 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting