[Sun Oct 16 00:09:28 2011] Detection parameters:
  Position = (712.7, 670.8) = 12 38 8.96 -68 16 15.0
  Extent = 0.5" x 0.5", rotation angle = 72 degrees
  Source counts = 11.4 +/- 3.9
  Background counts = 3.6
  Rate = 0.0002 +/- 7e-05

[Sun Oct 16 00:09:29 2011] Off-axis axis estimate = 6.22'
[Sun Oct 16 00:10:43 2011] Using EEF radius (= 1.74 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 00:10:43 2011] Initial guess for spatial extent in simple fitting = 1.74"
[Sun Oct 16 00:10:43 2011] source mask rpix=3.5, npix_max = 65, mask sum = 61, frac = 0.935
[Sun Oct 16 00:10:43 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 1.74"
[Sun Oct 16 00:10:44 2011] fullrun_ccd0_acisf11308_pi14-548_cl_pass0_src9.ximg exists
[Sun Oct 16 00:10:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11308_pi14-548_cl_pass0_src9.csv
[Sun Oct 16 00:10:44 2011] fullrun_ccd0_acisf11308_pi14-548_cl_pass0_src9_1.ximg exists
[Sun Oct 16 00:10:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11308_pi14-548_cl_pass0_src9.csv
[Sun Oct 16 00:10:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11308_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11308_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 00:10:44 2011] fullrun_ccd0_acisf11308_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun Oct 16 00:10:44 2011] fullrun_ccd0_acisf11308_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Oct 16 00:10:44 2011] Fit fullrun_ccd0_acisf11308_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Oct 16 00:10:57 2011] Spatial fit model total counts = 21.497400, observed total counts = 21.000000
[Sun Oct 16 00:10:57 2011] Offset between fit and detection position for source 9 = 2.832104 pixels
[Sun Oct 16 00:10:57 2011] 22.185900 total counts/ 10.160000 bgd. counts: snr = 3.772860
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 2.832104 pixels
  Position = (712.5, 673.7) = 12 38 9.02 -68 16 13.8
  Extent = 1.0 (0.6-1.3)", rotation angle = 0
  Source counts = 12.0 +/- 4.7
  Background counts = 10.2
  Rate = 0.0002 +/- 9e-05
[Sun Oct 16 00:10:57 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 00:10:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 00:10:57 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 00:10:57 2011] Source does appear to be extended
[Sun Oct 16 00:10:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 00:11:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 00:11:29 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Sun Oct 16 00:11:29 2011] source mask rpix=2.0, npix_max = 24, mask sum = 21, frac = 0.874
[Sun Oct 16 00:11:29 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.96"
[Sun Oct 16 00:11:30 2011] fullrun_ccd0_acisf11308_pi14-548_cl_pass1_src9.ximg exists
[Sun Oct 16 00:11:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11308_pi14-548_cl_pass1_src9.csv
[Sun Oct 16 00:11:30 2011] fullrun_ccd0_acisf11308_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Oct 16 00:11:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11308_pi14-548_cl_pass1_src9.csv
[Sun Oct 16 00:11:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11308_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11308_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 00:11:30 2011] fullrun_ccd0_acisf11308_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Oct 16 00:11:30 2011] fullrun_ccd0_acisf11308_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Oct 16 00:11:30 2011] Fit fullrun_ccd0_acisf11308_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Oct 16 00:11:41 2011] Spatial fit model total counts = 18.572800, observed total counts = 18.000000
[Sun Oct 16 00:11:41 2011] Offset between fit and detection position for source 9 = 0.256679 pixels
[Sun Oct 16 00:11:41 2011] 19.342830 total counts/ 7.760630 bgd. counts: snr = 4.157599
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.256679 pixels
  Position = (712.4, 673.9) = 12 38 9.03 -68 16 13.7
  Extent = 0.9 (0.6-1.8)", rotation angle = 0
  Source counts = 11.6 +/- 4.4
  Background counts = 7.8
  Rate = 0.0002 +/- 8e-05
[Sun Oct 16 00:11:41 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 00:11:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 00:11:41 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 00:11:41 2011] Source does appear to be extended
[Sun Oct 16 00:11:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 00:12:14 2011] Not overwriting source region fullrun_ccd0_acisf11308_pi14-548_pass1_cl_src9_src.reg
[Sun Oct 16 00:12:14 2011] Extracting stamp from image fullrun_ccd0_acisf11308_pi14-548_cl_sm2.00.img.gz, (672, 634) - (752, 714)
[Sun Oct 16 00:12:14 2011] Writing fullrun_ccd0_acisf11308_pi14-548_pass1_cl_src9.gif
[Sun Oct 16 00:12:40 2011] ../../acisf11308/products/events/fullrun_ccd0_acisf11308_pi14-548_pass1_cl_src9_src.evt and ../../acisf11308/products/events/fullrun_ccd0_acisf11308_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Oct 16 00:12:40 2011] Size of ../../acisf11308/products/events/fullrun_ccd0_acisf11308_pi14-548_pass1_cl_src9_src.evt.gz[events] = 16 counts
[Sun Oct 16 00:12:40 2011] Mean chipx,y = (538.75, 548.56)
[Sun Oct 16 00:12:40 2011] Mean tdetx,y = (3609.56, 4593.25)
[Sun Oct 16 00:12:40 2011] chipx,y range = (521.00-559.00, 534.00-569.00)
[Sun Oct 16 00:12:40 2011] Size of ../../acisf11308/products/events/fullrun_ccd0_acisf11308_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 23 counts
[Sun Oct 16 00:12:40 2011] ../../acisf11308/products/images/fullrun_ccd0_acisf11308_pi14-548_pass1_cl_src9_src.img and ../../acisf11308/products/images/fullrun_ccd0_acisf11308_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Oct 16 00:12:40 2011] ../../acisf11308/products/spectra/fullrun_ccd0_acisf11308_pi14-548_pass1_cl_src9_src.pi and ../../acisf11308/products/spectra/fullrun_ccd0_acisf11308_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun Oct 16 00:12:40 2011] Not generating rmf since there are only 11 counts
[Sun Oct 16 00:12:43 2011] ../../acisf11308/products/lightcurves/fullrun_ccd0_acisf11308_pi14-548_pass1_cl_src9_src.lc and ../../acisf11308/products/lightcurves/fullrun_ccd0_acisf11308_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Oct 16 00:13:21 2011] 176.627
[Sun Oct 16 00:19:09 2011] Updating aperture counts using extracted products
[Sun Oct 16 00:19:09 2011] Error reading totcts from fullrun_ccd0_acisf11308_pi14-548_pass1_cl_src9_src.pi.gz
[Sun Oct 16 00:19:09 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 00:19:09 2011] Using photon index=1.80, rate=0.000215, arf fullrun_ccd0_acisf11308_pi14-548_pass1_cl_src9.arf
[Sun Oct 16 00:19:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 00:19:09 2011] Updating source flux to 2.8e-15
[Sun Oct 16 00:19:16 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting