[Sat Oct 29 06:25:44 2011] Detection parameters:
  Position = (508.8, 1050.7) = 17 58 29.70 -29 6 44.5
  Extent = 0.5" x 0.5", rotation angle = 137 degrees
  Source counts = 23.2 +/- 4.9
  Background counts = 0.8
  Rate = 0.001 +/- 0.0002

[Sat Oct 29 06:25:46 2011] Off-axis axis estimate = 3.59'
[Sat Oct 29 06:26:45 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 06:26:45 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Sat Oct 29 06:26:45 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.049
[Sat Oct 29 06:26:45 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.71"
[Sat Oct 29 06:26:49 2011] fullrun_ccd3_acisf11306_pi14-548_cl_pass0_src5.ximg exists
[Sat Oct 29 06:26:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11306_pi14-548_cl_pass0_src5.csv
[Sat Oct 29 06:26:49 2011] fullrun_ccd3_acisf11306_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Oct 29 06:26:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11306_pi14-548_cl_pass0_src5.csv
[Sat Oct 29 06:26:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11306_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11306_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 06:26:49 2011] fullrun_ccd3_acisf11306_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Oct 29 06:26:49 2011] fullrun_ccd3_acisf11306_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Oct 29 06:26:49 2011] Fit fullrun_ccd3_acisf11306_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Oct 29 06:27:04 2011] Spatial fit model total counts = 48.035500, observed total counts = 46.000000
[Sat Oct 29 06:27:04 2011] Offset between fit and detection position for source 2 = 1.976784 pixels
[Sat Oct 29 06:27:04 2011] 47.904440 total counts/ 7.233240 bgd. counts: snr = 15.122394
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.976784 pixels
  Position = (510.5, 1051.6) = 17 58 29.65 -29 6 44.3
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 40.7 +/- 6.9
  Background counts = 7.2
  Rate = 0.002 +/- 0.0003
[Sat Oct 29 06:27:04 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 06:27:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 06:27:04 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 06:27:04 2011] Source does appear to be extended
[Sat Oct 29 06:27:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 06:27:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 06:27:26 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Sat Oct 29 06:27:26 2011] source mask rpix=1.4, npix_max = 15, mask sum = 8, frac = 0.529
[Sat Oct 29 06:27:26 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.71"
[Sat Oct 29 06:27:31 2011] fullrun_ccd3_acisf11306_pi14-548_cl_pass1_src5.ximg exists
[Sat Oct 29 06:27:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11306_pi14-548_cl_pass1_src5.csv
[Sat Oct 29 06:27:31 2011] fullrun_ccd3_acisf11306_pi14-548_cl_pass1_src5_1.ximg exists
[Sat Oct 29 06:27:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11306_pi14-548_cl_pass1_src5.csv
[Sat Oct 29 06:27:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11306_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11306_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 06:27:31 2011] fullrun_ccd3_acisf11306_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat Oct 29 06:27:31 2011] fullrun_ccd3_acisf11306_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Oct 29 06:27:31 2011] Fit fullrun_ccd3_acisf11306_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Oct 29 06:27:42 2011] Spatial fit model total counts = 47.628400, observed total counts = 46.000000
[Sat Oct 29 06:27:42 2011] Offset between fit and detection position for source 2 = 0.007351 pixels
[Sat Oct 29 06:27:42 2011] 47.091550 total counts/ 6.156250 bgd. counts: snr = 16.498325
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.007351 pixels
  Position = (510.5, 1051.6) = 17 58 29.65 -29 6 44.3
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 40.9 +/- 6.9
  Background counts = 6.2
  Rate = 0.002 +/- 0.0003
[Sat Oct 29 06:27:42 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 06:27:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 06:27:42 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 06:27:42 2011] Source does appear to be extended
[Sat Oct 29 06:27:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 07:06:12 2011] Writing source region out to fullrun_ccd3_acisf11306_pi14-548_pass1_cl_src2_src.reg
[Sat Oct 29 07:06:12 2011] Extracting stamp from image fullrun_ccd3_acisf11306_pi14-548_cl_sm2.00.img.gz, (477, 1018) - (544, 1085)
[Sat Oct 29 07:06:12 2011] Writing fullrun_ccd3_acisf11306_pi14-548_pass1_cl_src2.gif
[Sat Oct 29 07:08:05 2011] Size of ../../acisf11306/products/events/fullrun_ccd3_acisf11306_pi14-548_pass1_cl_src2_src.evt.gz[events] = 43 counts
[Sat Oct 29 07:08:05 2011] Mean chipx,y = (513.77, 993.28)
[Sat Oct 29 07:08:05 2011] Mean tdetx,y = (4138.72, 3574.77)
[Sat Oct 29 07:08:05 2011] chipx,y range = (494.00-530.00, 974.00-1014.00)
[Sat Oct 29 07:08:05 2011] Size of ../../acisf11306/products/events/fullrun_ccd3_acisf11306_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 12 counts
[Sat Oct 29 07:08:06 2011] Not generating rmf since there are only 40 counts
[Sat Oct 29 07:08:06 2011] arf not found, will run specextract
[Sat Oct 29 07:08:35 2011] ../../acisf11306/products/spectra/fullrun_ccd3_acisf11306_pi14-548_pass1_cl_src2.warf not found
[Sat Oct 29 07:08:35 2011] ../../acisf11306/products/spectra/fullrun_ccd3_acisf11306_pi14-548_pass1_cl_src2.wrmf not found
[Sat Oct 29 07:08:35 2011] Removal of ../../acisf11306/products/spectra/fullrun_ccd3_acisf11306_pi14-548_pass1_cl_src2.soff failed
[Sat Oct 29 07:19:47 2011] Spectrum 2 has only 41 counts, deleting rmf
[Sat Oct 29 07:19:47 2011] 177.275
[Sat Oct 29 07:19:52 2011] Updating aperture counts using extracted products
[Sat Oct 29 07:19:52 2011] Error reading totcts from fullrun_ccd3_acisf11306_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct 29 07:19:52 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 07:19:52 2011] Using photon index=1.80, rate=0.00207, arf fullrun_ccd3_acisf11306_pi14-548_pass1_cl_src2.arf
[Sat Oct 29 07:19:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 07:19:52 2011] Updating source flux to 2.8e-14
[Sat Oct 29 07:20:03 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 29 07:20:04 2011] acisf11306/analysis//spectral/fullrun_ccd3_acisf11306_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete