[Tue Sep 27 10:14:08 2011] Detection parameters:
  Position = (132.6, 735.4) = 17 58 44.10 -29 9 20.7
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 10.5 +/- 3.3
  Background counts = 0.5
  Rate = 0.0005 +/- 0.0002

[Tue Sep 27 10:14:08 2011] Off-axis axis estimate = 2.41'
[Tue Sep 27 10:15:03 2011] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 10:15:03 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Tue Sep 27 10:15:03 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.036
[Tue Sep 27 10:15:03 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.48"
[Tue Sep 27 10:15:04 2011] fullrun_ccd3_acisf11304_pi14-548_cl_pass0_src16.ximg exists
[Tue Sep 27 10:15:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11304_pi14-548_cl_pass0_src16.csv
[Tue Sep 27 10:15:04 2011] fullrun_ccd3_acisf11304_pi14-548_cl_pass0_src16_1.ximg exists
[Tue Sep 27 10:15:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11304_pi14-548_cl_pass0_src16.csv
[Tue Sep 27 10:15:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11304_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11304_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 10:15:04 2011] fullrun_ccd3_acisf11304_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Tue Sep 27 10:15:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11304_pi14-548_cl_pass0_tfrozen_src16.csv
[Tue Sep 27 10:15:04 2011] fullrun_ccd3_acisf11304_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Sep 27 10:15:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11304_pi14-548_cl_pass0_tfrozen_src16.csv
[Tue Sep 27 10:15:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11304_pi14-548_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11304_pi14-548_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 10:15:16 2011] Spatial fit model total counts = 9.906280, observed total counts = 12.000000
[Tue Sep 27 10:15:16 2011] Offset between fit and detection position for source 26 = 0.644070 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.644070 pixels
  Position = (133.0, 735.9) = 17 58 44.10 -29 9 20.7
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 10.4 +/- 3.2
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0002
[Tue Sep 27 10:15:16 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 10:15:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 10:15:16 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 10:15:16 2011] Source does appear to be extended
[Tue Sep 27 10:15:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 10:15:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 10:15:40 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Tue Sep 27 10:15:40 2011] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.217
[Tue Sep 27 10:15:40 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.53"
[Tue Sep 27 10:15:41 2011] fullrun_ccd3_acisf11304_pi14-548_cl_pass1_src16.ximg exists
[Tue Sep 27 10:15:41 2011] fullrun_ccd3_acisf11304_pi14-548_cl_pass1_src16_1.ximg exists
[Tue Sep 27 10:15:41 2011] Fit fullrun_ccd3_acisf11304_pi14-548_cl_pass1_src16 appears to have run properly
[Tue Sep 27 10:15:41 2011] fullrun_ccd3_acisf11304_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Tue Sep 27 10:15:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11304_pi14-548_cl_pass1_tfrozen_src16.csv
[Tue Sep 27 10:15:41 2011] fullrun_ccd3_acisf11304_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Sep 27 10:15:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11304_pi14-548_cl_pass1_tfrozen_src16.csv
[Tue Sep 27 10:15:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11304_pi14-548_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11304_pi14-548_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 10:15:52 2011] Spatial fit model total counts = 10.142300, observed total counts = 12.000000
[Tue Sep 27 10:15:52 2011] Offset between fit and detection position for source 26 = 0.086368 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.086368 pixels
  Position = (133.0, 736.0) = 17 58 44.10 -29 9 20.7
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 10.7 +/- 3.3
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0002
[Tue Sep 27 10:15:52 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 10:15:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 10:15:52 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 10:15:52 2011] Source does appear to be extended
[Tue Sep 27 10:15:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 10:55:14 2011] Not overwriting source region fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26_src.reg
[Tue Sep 27 10:55:14 2011] Extracting stamp from image fullrun_ccd3_acisf11304_pi14-548_cl_sm2.00.img.gz, (109, 712) - (157, 760)
[Tue Sep 27 10:55:14 2011] Writing fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26.gif
[Tue Sep 27 11:03:33 2011] ../../acisf11304/products/events/fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26_src.evt and ../../acisf11304/products/events/fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Tue Sep 27 11:03:33 2011] Size of ../../acisf11304/products/events/fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26_src.evt.gz[events] = 11 counts
[Tue Sep 27 11:03:33 2011] Mean chipx,y = (937.45, 733.55)
[Tue Sep 27 11:03:33 2011] Mean tdetx,y = (4398.45, 3998.45)
[Tue Sep 27 11:03:33 2011] chipx,y range = (923.00-956.00, 719.00-751.00)
[Tue Sep 27 11:03:34 2011] Size of ../../acisf11304/products/events/fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 4 counts
[Tue Sep 27 11:03:34 2011] ../../acisf11304/products/images/fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26_src.img and ../../acisf11304/products/images/fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Tue Sep 27 11:03:34 2011] Not generating rmf since there are only 10 counts
[Tue Sep 27 11:03:34 2011] arf not found, will run specextract
[Tue Sep 27 11:04:01 2011] ../../acisf11304/products/spectra/fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26.warf not found
[Tue Sep 27 11:04:01 2011] ../../acisf11304/products/spectra/fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26.wrmf not found
[Tue Sep 27 11:04:01 2011] Removal of ../../acisf11304/products/spectra/fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26.soff failed
[Tue Sep 27 11:04:14 2011] ../../acisf11304/products/lightcurves/fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26_src.lc and ../../acisf11304/products/lightcurves/fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Tue Sep 27 11:11:36 2011] Spectrum 26 has only 11 counts, deleting rmf
[Tue Sep 27 11:11:36 2011] 200.925
[Tue Sep 27 11:11:40 2011] Updating aperture counts using extracted products
[Tue Sep 27 11:11:40 2011] Error reading totcts from fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26_src.pi.gz
[Tue Sep 27 11:11:41 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 11:11:41 2011] Using photon index=1.80, rate=0.000541, arf fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26.arf
[Tue Sep 27 11:11:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 11:11:41 2011] Updating source flux to 6.4e-15
[Tue Sep 27 11:11:52 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Sep 27 11:11:53 2011] acisf11304/analysis//spectral/fullrun_ccd3_acisf11304_pi14-548_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete