[Tue Sep 27 10:13:59 2011] Detection parameters:
  Position = (255.5, 977.1) = 17 59 22.77 -28 59 53.3
  Extent = 1.8" x 1.5", rotation angle = 150 degrees
  Source counts = 196.3 +/- 15.4
  Background counts = 40.7
  Rate = 0.01 +/- 0.0008

[Tue Sep 27 10:14:00 2011] Off-axis axis estimate = 10.73'
[Tue Sep 27 10:15:00 2011] Using EEF radius (= 5.11 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 10:15:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 10:15:00 2011] Initial guess for spatial extent in simple fitting = 5.11"
[Tue Sep 27 10:15:00 2011] source mask rpix=10.4, npix_max = 474, mask sum = 462, frac = 0.973
[Tue Sep 27 10:15:00 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 5.11"
[Tue Sep 27 10:15:00 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass0_src2.ximg exists
[Tue Sep 27 10:15:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11304_pi14-548_cl_pass0_src2.csv
[Tue Sep 27 10:15:00 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass0_src2_1.ximg exists
[Tue Sep 27 10:15:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11304_pi14-548_cl_pass0_src2.csv
[Tue Sep 27 10:15:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11304_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11304_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 10:15:01 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Tue Sep 27 10:15:01 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Sep 27 10:15:01 2011] Fit fullrun_ccd0_acisf11304_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Sep 27 10:15:10 2011] Spatial fit model total counts = 300.293000, observed total counts = 294.000000
[Tue Sep 27 10:15:10 2011] Offset between fit and detection position for source 2 = 0.559810 pixels
[Tue Sep 27 10:15:10 2011] 300.188900 total counts/ 23.248900 bgd. counts: snr = 57.436039
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.559810 pixels
  Position = (255.4, 977.7) = 17 59 22.79 -28 59 53.2
  Extent = 4.9 (4.4-5.2)", rotation angle = 0
  Source counts = 276.9 +/- 17.3
  Background counts = 23.2
  Rate = 0.01 +/- 0.0009
[Tue Sep 27 10:15:10 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 10:15:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 10:15:10 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 10:15:10 2011] Source does appear to be extended
[Tue Sep 27 10:15:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 10:15:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 10:15:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 10:15:37 2011] Initial guess for spatial extent in simple fitting = 4.95"
[Tue Sep 27 10:15:37 2011] source mask rpix=10.1, npix_max = 446, mask sum = 441, frac = 0.989
[Tue Sep 27 10:15:37 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 4.95"
[Tue Sep 27 10:15:37 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass1_src2.ximg exists
[Tue Sep 27 10:15:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11304_pi14-548_cl_pass1_src2.csv
[Tue Sep 27 10:15:37 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass1_src2_1.ximg exists
[Tue Sep 27 10:15:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11304_pi14-548_cl_pass1_src2.csv
[Tue Sep 27 10:15:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11304_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11304_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 10:15:38 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Tue Sep 27 10:15:38 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Sep 27 10:15:38 2011] Fit fullrun_ccd0_acisf11304_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Sep 27 10:15:46 2011] Spatial fit model total counts = 296.812000, observed total counts = 293.000000
[Tue Sep 27 10:15:46 2011] Offset between fit and detection position for source 2 = 0.154573 pixels
[Tue Sep 27 10:15:46 2011] 296.846100 total counts/ 34.436100 bgd. counts: snr = 44.717076
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.154573 pixels
  Position = (255.3, 977.6) = 17 59 22.80 -28 59 53.3
  Extent = 4.9 (4.4-5.2)", rotation angle = 0
  Source counts = 262.4 +/- 17.2
  Background counts = 34.4
  Rate = 0.01 +/- 0.0009
[Tue Sep 27 10:15:46 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 10:15:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 10:15:46 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 10:15:46 2011] Source does appear to be extended
[Tue Sep 27 10:15:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 10:16:09 2011] Not overwriting source region fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2_src.reg
[Tue Sep 27 10:16:09 2011] Extracting stamp from image fullrun_ccd0_acisf11304_pi14-548_cl_sm2.00.img.gz, (30, 753) - (480, 1147)
[Tue Sep 27 10:16:09 2011] Writing fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2.gif
[Tue Sep 27 10:16:43 2011] ../../acisf11304/products/events/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2_src.evt and ../../acisf11304/products/events/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Sep 27 10:16:43 2011] Size of ../../acisf11304/products/events/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2_src.evt.gz[events] = 307 counts
[Tue Sep 27 10:16:43 2011] Mean chipx,y = (247.06, 65.81)
[Tue Sep 27 10:16:43 2011] Mean tdetx,y = (3126.81, 4884.94)
[Tue Sep 27 10:16:43 2011] chipx,y range = (193.00-294.00, 24.00-117.00)
[Tue Sep 27 10:16:43 2011] Size of ../../acisf11304/products/events/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 308 counts
[Tue Sep 27 10:16:43 2011] ../../acisf11304/products/images/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2_src.img and ../../acisf11304/products/images/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Sep 27 10:16:43 2011] rmf not found, will run specextract
[Tue Sep 27 10:16:43 2011] arf not found, will run specextract
[Tue Sep 27 10:16:57 2011] ../../acisf11304/products/spectra/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2.warf not found
[Tue Sep 27 10:16:57 2011] ../../acisf11304/products/spectra/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2.wrmf not found
[Tue Sep 27 10:16:57 2011] Removal of ../../acisf11304/products/spectra/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2.soff failed
[Tue Sep 27 10:17:08 2011] ../../acisf11304/products/lightcurves/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2_src.lc and ../../acisf11304/products/lightcurves/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Sep 27 10:28:12 2011] Keeping rmf generated by specextract
[Tue Sep 27 10:28:12 2011] 128.531
[Tue Sep 27 11:11:39 2011] Updating aperture counts using extracted products
[Tue Sep 27 11:11:39 2011] Error reading totcts from fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Sep 27 11:11:39 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 11:11:39 2011] Using photon index=1.80, rate=0.0133, arf fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2.arf
[Tue Sep 27 11:11:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 11:11:39 2011] Updating source flux to 2.4e-13
[Tue Sep 27 11:11:48 2011] Reading fit data from acisf11304/analysis//spectral/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2_pl.csv
[Tue Sep 27 11:11:48 2011] Spectral fit parameter nH value = 3.83683e+21
[Tue Sep 27 11:11:48 2011] Spectral fit parameter PhoIndex value = 1.61878
[Tue Sep 27 11:11:48 2011] Failed to get F(0.3-8.0) from acisf11304/analysis//spectral/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Sep 27 11:11:48 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 11:11:48 2011] Using Nh = 3.8e+21, photon index=1.62, rate=0.0133, arf fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src2.arf
[Tue Sep 27 11:11:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 11:11:48 2011] Updating source flux to 2.6e-13