[Tue Sep 27 10:13:59 2011] Detection parameters:
  Position = (629.3, 327.4) = 17 59 8.77 -29 5 13.1
  Extent = 0.5" x 0.5", rotation angle = 140 degrees
  Source counts = 24.0 +/- 5.0
  Background counts = 1.0
  Rate = 0.001 +/- 0.0003

[Tue Sep 27 10:14:00 2011] Off-axis axis estimate = 5.30'
[Tue Sep 27 10:15:00 2011] Using EEF radius (= 1.30 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 10:15:00 2011] Initial guess for spatial extent in simple fitting = 1.30"
[Tue Sep 27 10:15:00 2011] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.883
[Tue Sep 27 10:15:00 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 1.30"
[Tue Sep 27 10:15:01 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass0_src13.ximg exists
[Tue Sep 27 10:15:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11304_pi14-548_cl_pass0_src13.csv
[Tue Sep 27 10:15:01 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass0_src13_1.ximg exists
[Tue Sep 27 10:15:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11304_pi14-548_cl_pass0_src13.csv
[Tue Sep 27 10:15:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11304_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11304_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 10:15:01 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Tue Sep 27 10:15:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11304_pi14-548_cl_pass0_tfrozen_src13.csv
[Tue Sep 27 10:15:01 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Sep 27 10:15:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11304_pi14-548_cl_pass0_tfrozen_src13.csv
[Tue Sep 27 10:15:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11304_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11304_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 10:15:10 2011] Source 13 is offset by 3.909240 and -4.140197 pixels which is larger than
2 X fitted extent = 0.445378 x 0.445378, not incorporating fit results
[Tue Sep 27 10:15:11 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 10:15:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 10:15:11 2011] Assessing source extent using major
[Tue Sep 27 10:15:11 2011] Source does appear to be extended
[Tue Sep 27 10:15:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 10:15:37 2011] Using EEF radius (= 1.30 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 10:15:37 2011] Initial guess for spatial extent in simple fitting = 1.30"
[Tue Sep 27 10:15:37 2011] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.883
[Tue Sep 27 10:15:37 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 1.30"
[Tue Sep 27 10:15:38 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass1_src13.ximg exists
[Tue Sep 27 10:15:38 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass1_src13_1.ximg exists
[Tue Sep 27 10:15:38 2011] Fit fullrun_ccd0_acisf11304_pi14-548_cl_pass1_src13 appears to have run properly
[Tue Sep 27 10:15:38 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Tue Sep 27 10:15:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11304_pi14-548_cl_pass1_tfrozen_src13.csv
[Tue Sep 27 10:15:38 2011] fullrun_ccd0_acisf11304_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Sep 27 10:15:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11304_pi14-548_cl_pass1_tfrozen_src13.csv
[Tue Sep 27 10:15:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11304_pi14-548_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11304_pi14-548_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 10:15:46 2011] Spatial fit model total counts = 53.675500, observed total counts = 55.000000
[Tue Sep 27 10:15:46 2011] Offset between fit and detection position for source 13 = 1.892364 pixels
[Tue Sep 27 10:15:46 2011] 53.359560 total counts/ 1.388460 bgd. counts: snr = 44.105751
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.892364 pixels
  Position = (627.8, 328.4) = 17 59 8.85 -29 5 12.9
  Extent = 1.5 (1.1-3.0)" x 0.8 (0.6-1.0)", rotation angle = 17 (2-30) degrees
  Source counts = 52.0 +/- 7.3
  Background counts = 1.4
  Rate = 0.003 +/- 0.0004
[Tue Sep 27 10:15:46 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 10:15:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 10:15:46 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 10:15:46 2011] Source does appear to be extended
[Tue Sep 27 10:15:46 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.12
[Tue Sep 27 10:16:09 2011] Not overwriting source region fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src13_src.reg
[Tue Sep 27 10:16:09 2011] Extracting stamp from image fullrun_ccd0_acisf11304_pi14-548_cl_sm2.00.img.gz, (559, 260) - (696, 397)
[Tue Sep 27 10:16:09 2011] Writing fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src13.gif
[Tue Sep 27 10:23:09 2011] ../../acisf11304/products/events/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src13_src.evt and ../../acisf11304/products/events/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Tue Sep 27 10:23:09 2011] Size of ../../acisf11304/products/events/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src13_src.evt.gz[events] = 58 counts
[Tue Sep 27 10:23:09 2011] Mean chipx,y = (537.60, 757.05)
[Tue Sep 27 10:23:09 2011] Mean tdetx,y = (3818.05, 4594.40)
[Tue Sep 27 10:23:09 2011] chipx,y range = (516.00-559.00, 736.00-776.00)
[Tue Sep 27 10:23:09 2011] Size of ../../acisf11304/products/events/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 50 counts
[Tue Sep 27 10:23:09 2011] ../../acisf11304/products/images/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src13_src.img and ../../acisf11304/products/images/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Tue Sep 27 10:23:09 2011] Not generating rmf since there are only 51 counts
[Tue Sep 27 10:23:09 2011] arf not found, will run specextract
[Tue Sep 27 10:23:42 2011] ../../acisf11304/products/spectra/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src13.warf not found
[Tue Sep 27 10:23:42 2011] ../../acisf11304/products/spectra/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src13.wrmf not found
[Tue Sep 27 10:23:42 2011] Removal of ../../acisf11304/products/spectra/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src13.soff failed
[Tue Sep 27 10:23:51 2011] ../../acisf11304/products/lightcurves/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src13_src.lc and ../../acisf11304/products/lightcurves/fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Tue Sep 27 10:28:12 2011] Spectrum 13 has only 52 counts, deleting rmf
[Tue Sep 27 10:28:12 2011] 182.096
[Tue Sep 27 11:11:39 2011] Updating aperture counts using extracted products
[Tue Sep 27 11:11:39 2011] Error reading totcts from fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src13_src.pi.gz
[Tue Sep 27 11:11:39 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 11:11:39 2011] Using photon index=1.80, rate=0.00262, arf fullrun_ccd0_acisf11304_pi14-548_pass1_cl_src13.arf
[Tue Sep 27 11:11:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 11:11:39 2011] Updating source flux to 3.4e-14
[Tue Sep 27 11:11:44 2011] Flag b found in src. 13 procflags, skipping spectral fitting
[Tue Sep 27 11:11:44 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting