[Tue Oct 18 02:48:39 2011] Detection parameters:
  Position = (493.6, 1056.4) = 17 58 29.66 -29 6 44.1
  Extent = 0.7" x 0.5", rotation angle = 84 degrees
  Source counts = 50.0 +/- 7.1
  Background counts = 1.0
  Rate = 0.003 +/- 0.0004

[Tue Oct 18 02:48:40 2011] Off-axis axis estimate = 3.54'
[Tue Oct 18 02:49:31 2011] Using EEF radius (= 0.70 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 02:49:31 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Tue Oct 18 02:49:31 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.077
[Tue Oct 18 02:49:31 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.70"
[Tue Oct 18 02:49:33 2011] fullrun_ccd3_acisf11303_pi14-548_cl_pass0_src3.ximg exists
[Tue Oct 18 02:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11303_pi14-548_cl_pass0_src3.csv
[Tue Oct 18 02:49:33 2011] fullrun_ccd3_acisf11303_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Oct 18 02:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11303_pi14-548_cl_pass0_src3.csv
[Tue Oct 18 02:49:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11303_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11303_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 02:49:33 2011] fullrun_ccd3_acisf11303_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Oct 18 02:49:33 2011] fullrun_ccd3_acisf11303_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Oct 18 02:49:33 2011] Fit fullrun_ccd3_acisf11303_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Oct 18 02:49:43 2011] Spatial fit model total counts = 51.765600, observed total counts = 52.000000
[Tue Oct 18 02:49:43 2011] Offset between fit and detection position for source 1 = 0.804867 pixels
[Tue Oct 18 02:49:43 2011] 51.617920 total counts/ 5.052820 bgd. counts: snr = 20.715414
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.804867 pixels
  Position = (494.2, 1056.9) = 17 58 29.66 -29 6 44.1
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 46.6 +/- 7.2
  Background counts = 5.1
  Rate = 0.002 +/- 0.0004
[Tue Oct 18 02:49:43 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 02:49:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 02:49:43 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 02:49:43 2011] Source does appear to be extended
[Tue Oct 18 02:49:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 02:50:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 02:50:06 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Tue Oct 18 02:50:06 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.245
[Tue Oct 18 02:50:06 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.64"
[Tue Oct 18 02:50:06 2011] fullrun_ccd3_acisf11303_pi14-548_cl_pass1_src3.ximg exists
[Tue Oct 18 02:50:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11303_pi14-548_cl_pass1_src3.csv
[Tue Oct 18 02:50:07 2011] fullrun_ccd3_acisf11303_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Oct 18 02:50:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11303_pi14-548_cl_pass1_src3.csv
[Tue Oct 18 02:50:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11303_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11303_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 02:50:07 2011] fullrun_ccd3_acisf11303_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Oct 18 02:50:07 2011] fullrun_ccd3_acisf11303_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Oct 18 02:50:07 2011] Fit fullrun_ccd3_acisf11303_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Oct 18 02:50:15 2011] Spatial fit model total counts = 52.143600, observed total counts = 52.000000
[Tue Oct 18 02:50:15 2011] Offset between fit and detection position for source 1 = 0.015736 pixels
[Tue Oct 18 02:50:15 2011] 51.801100 total counts/ 5.065600 bgd. counts: snr = 20.764977
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015736 pixels
  Position = (494.2, 1057.0) = 17 58 29.66 -29 6 44.1
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 46.7 +/- 7.2
  Background counts = 5.1
  Rate = 0.002 +/- 0.0004
[Tue Oct 18 02:50:15 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 02:50:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 02:50:15 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 02:50:15 2011] Source does appear to be extended
[Tue Oct 18 02:50:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 03:17:04 2011] Not overwriting source region fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1_src.reg
[Tue Oct 18 03:17:04 2011] Extracting stamp from image fullrun_ccd3_acisf11303_pi14-548_cl_sm2.00.img.gz, (465, 1028) - (523, 1086)
[Tue Oct 18 03:17:04 2011] Writing fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1.gif
[Tue Oct 18 03:17:58 2011] ../../acisf11303/products/events/fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1_src.evt and ../../acisf11303/products/events/fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Oct 18 03:17:58 2011] Size of ../../acisf11303/products/events/fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1_src.evt.gz[events] = 50 counts
[Tue Oct 18 03:17:58 2011] Mean chipx,y = (517.02, 1007.04)
[Tue Oct 18 03:17:58 2011] Mean tdetx,y = (4124.96, 3578.02)
[Tue Oct 18 03:17:58 2011] chipx,y range = (501.00-537.00, 989.00-1022.00)
[Tue Oct 18 03:17:58 2011] Size of ../../acisf11303/products/events/fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 14 counts
[Tue Oct 18 03:17:58 2011] ../../acisf11303/products/images/fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1_src.img and ../../acisf11303/products/images/fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Oct 18 03:17:58 2011] Not generating rmf since there are only 46 counts
[Tue Oct 18 03:17:58 2011] arf not found, will run specextract
[Tue Oct 18 03:18:34 2011] ../../acisf11303/products/spectra/fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1.warf not found
[Tue Oct 18 03:18:34 2011] ../../acisf11303/products/spectra/fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1.wrmf not found
[Tue Oct 18 03:18:34 2011] Removal of ../../acisf11303/products/spectra/fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1.soff failed
[Tue Oct 18 03:18:40 2011] ../../acisf11303/products/lightcurves/fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1_src.lc and ../../acisf11303/products/lightcurves/fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Oct 18 03:31:18 2011] Spectrum 1 has only 47 counts, deleting rmf
[Tue Oct 18 03:31:18 2011] 165.33
[Tue Oct 18 03:31:22 2011] Updating aperture counts using extracted products
[Tue Oct 18 03:31:22 2011] Error reading totcts from fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Oct 18 03:31:22 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 03:31:22 2011] Using photon index=1.80, rate=0.00235, arf fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1.arf
[Tue Oct 18 03:31:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 03:31:22 2011] Updating source flux to 3.4e-14
[Tue Oct 18 03:31:30 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 18 03:31:31 2011] acisf11303/analysis//spectral/fullrun_ccd3_acisf11303_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete