[Tue Oct 18 02:48:38 2011] Detection parameters:
  Position = (270.3, 302.6) = 17 58 42.93 -29 4 27.8
  Extent = 0.6" x 0.5", rotation angle = 136 degrees
  Source counts = 32.4 +/- 5.7
  Background counts = 0.6
  Rate = 0.002 +/- 0.0003

[Tue Oct 18 02:48:39 2011] Off-axis axis estimate = 2.59'
[Tue Oct 18 02:49:30 2011] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 02:49:30 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Tue Oct 18 02:49:30 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.961
[Tue Oct 18 02:49:30 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.51"
[Tue Oct 18 02:49:31 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass0_src3.ximg exists
[Tue Oct 18 02:49:31 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Oct 18 02:49:31 2011] Fit fullrun_ccd2_acisf11303_pi14-548_cl_pass0_src3 appears to have run properly
[Tue Oct 18 02:49:31 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Oct 18 02:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11303_pi14-548_cl_pass0_tfrozen_src3.csv
[Tue Oct 18 02:49:31 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Oct 18 02:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11303_pi14-548_cl_pass0_tfrozen_src3.csv
[Tue Oct 18 02:49:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11303_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11303_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 02:49:41 2011] Spatial fit model total counts = 30.118200, observed total counts = 34.000000
[Tue Oct 18 02:49:41 2011] Offset between fit and detection position for source 4 = 0.739974 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.739974 pixels
  Position = (270.6, 303.2) = 17 58 42.93 -29 4 27.7
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 30.9 +/- 5.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Tue Oct 18 02:49:41 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 02:49:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 02:49:41 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 02:49:41 2011] Source does appear to be extended
[Tue Oct 18 02:49:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 02:50:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 02:50:05 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Tue Oct 18 02:50:05 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.974
[Tue Oct 18 02:50:05 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.62"
[Tue Oct 18 02:50:06 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass1_src3.ximg exists
[Tue Oct 18 02:50:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11303_pi14-548_cl_pass1_src3.csv
[Tue Oct 18 02:50:06 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Oct 18 02:50:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11303_pi14-548_cl_pass1_src3.csv
[Tue Oct 18 02:50:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11303_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11303_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 02:50:06 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Oct 18 02:50:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11303_pi14-548_cl_pass1_tfrozen_src3.csv
[Tue Oct 18 02:50:06 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Oct 18 02:50:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11303_pi14-548_cl_pass1_tfrozen_src3.csv
[Tue Oct 18 02:50:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11303_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11303_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 02:50:14 2011] Spatial fit model total counts = 30.899800, observed total counts = 34.000000
[Tue Oct 18 02:50:14 2011] Offset between fit and detection position for source 4 = 0.016100 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.016100 pixels
  Position = (270.6, 303.2) = 17 58 42.93 -29 4 27.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 31.4 +/- 5.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Tue Oct 18 02:50:14 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 02:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 02:50:14 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 02:50:14 2011] Source does appear to be extended
[Tue Oct 18 02:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 03:06:09 2011] Not overwriting source region fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4_src.reg
[Tue Oct 18 03:06:09 2011] Extracting stamp from image fullrun_ccd2_acisf11303_pi14-548_cl_sm2.00.img.gz, (243, 275) - (299, 331)
[Tue Oct 18 03:06:09 2011] Writing fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4.gif
[Tue Oct 18 03:07:14 2011] ../../acisf11303/products/events/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4_src.evt and ../../acisf11303/products/events/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue Oct 18 03:07:14 2011] Size of ../../acisf11303/products/events/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4_src.evt.gz[events] = 33 counts
[Tue Oct 18 03:07:14 2011] Mean chipx,y = (185.06, 745.21)
[Tue Oct 18 03:07:14 2011] Mean tdetx,y = (3806.21, 3900.94)
[Tue Oct 18 03:07:14 2011] chipx,y range = (170.00-203.00, 730.00-763.00)
[Tue Oct 18 03:07:14 2011] Size of ../../acisf11303/products/events/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 2 counts
[Tue Oct 18 03:07:14 2011] ../../acisf11303/products/images/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4_src.img and ../../acisf11303/products/images/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue Oct 18 03:07:14 2011] Not generating rmf since there are only 31 counts
[Tue Oct 18 03:07:14 2011] arf not found, will run specextract
[Tue Oct 18 03:07:41 2011] ../../acisf11303/products/spectra/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4.warf not found
[Tue Oct 18 03:07:41 2011] ../../acisf11303/products/spectra/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4.wrmf not found
[Tue Oct 18 03:07:41 2011] Removal of ../../acisf11303/products/spectra/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4.soff failed
[Tue Oct 18 03:07:46 2011] ../../acisf11303/products/lightcurves/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4_src.lc and ../../acisf11303/products/lightcurves/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue Oct 18 03:17:04 2011] Spectrum 4 has only 31 counts, deleting rmf
[Tue Oct 18 03:17:04 2011] 190.821
[Tue Oct 18 03:31:22 2011] Updating aperture counts using extracted products
[Tue Oct 18 03:31:22 2011] Error reading totcts from fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4_src.pi.gz
[Tue Oct 18 03:31:22 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 03:31:22 2011] Using photon index=1.80, rate=0.00158, arf fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4.arf
[Tue Oct 18 03:31:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 03:31:22 2011] Updating source flux to 2e-14
[Tue Oct 18 03:31:29 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 18 03:31:30 2011] acisf11303/analysis//spectral/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete