[Tue Oct 18 02:48:38 2011] Detection parameters:
  Position = (837.2, 480.2) = 17 58 21.66 -29 3 0.3
  Extent = 0.5" x 0.5", rotation angle = 45 degrees
  Source counts = 23.1 +/- 5.0
  Background counts = 1.9
  Rate = 0.001 +/- 0.0003

[Tue Oct 18 02:48:39 2011] Off-axis axis estimate = 6.61'
[Tue Oct 18 02:49:30 2011] Using EEF radius (= 1.95 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 02:49:30 2011] Initial guess for spatial extent in simple fitting = 1.95"
[Tue Oct 18 02:49:30 2011] source mask rpix=4.0, npix_max = 79, mask sum = 63, frac = 0.788
[Tue Oct 18 02:49:30 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.95"
[Tue Oct 18 02:49:31 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass0_src6.ximg exists
[Tue Oct 18 02:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11303_pi14-548_cl_pass0_src6.csv
[Tue Oct 18 02:49:31 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass0_src6_1.ximg exists
[Tue Oct 18 02:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11303_pi14-548_cl_pass0_src6.csv
[Tue Oct 18 02:49:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11303_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11303_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 02:49:31 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Tue Oct 18 02:49:31 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Oct 18 02:49:31 2011] Fit fullrun_ccd2_acisf11303_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Oct 18 02:49:41 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 21.781976 pixels away
[Tue Oct 18 02:49:41 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 02:49:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 02:49:41 2011] Assessing source extent using major
[Tue Oct 18 02:49:41 2011] Source does appear to be extended
[Tue Oct 18 02:49:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 02:50:05 2011] Using EEF radius (= 1.95 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 02:50:05 2011] Initial guess for spatial extent in simple fitting = 1.95"
[Tue Oct 18 02:50:05 2011] source mask rpix=4.0, npix_max = 79, mask sum = 63, frac = 0.788
[Tue Oct 18 02:50:05 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 1.95"
[Tue Oct 18 02:50:06 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass1_src6.ximg exists
[Tue Oct 18 02:50:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11303_pi14-548_cl_pass1_src6.csv
[Tue Oct 18 02:50:06 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass1_src6_1.ximg exists
[Tue Oct 18 02:50:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11303_pi14-548_cl_pass1_src6.csv
[Tue Oct 18 02:50:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11303_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11303_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 02:50:06 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Tue Oct 18 02:50:06 2011] fullrun_ccd2_acisf11303_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Oct 18 02:50:06 2011] Fit fullrun_ccd2_acisf11303_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Oct 18 02:50:14 2011] Spatial fit model total counts = 38.168000, observed total counts = 37.000000
[Tue Oct 18 02:50:14 2011] Offset between fit and detection position for source 11 = 0.423385 pixels
[Tue Oct 18 02:50:14 2011] 38.840700 total counts/ 13.702800 bgd. counts: snr = 6.790853
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.423385 pixels
  Position = (836.9, 480.0) = 17 58 21.69 -29 3 0.6
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 25.1 +/- 6.2
  Background counts = 13.7
  Rate = 0.001 +/- 0.0003
[Tue Oct 18 02:50:14 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 02:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 02:50:14 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 02:50:14 2011] Source does appear to be extended
[Tue Oct 18 02:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 03:06:09 2011] Not overwriting source region fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11_src.reg
[Tue Oct 18 03:06:09 2011] Extracting stamp from image fullrun_ccd2_acisf11303_pi14-548_cl_sm2.00.img.gz, (790, 433) - (883, 527)
[Tue Oct 18 03:06:09 2011] Writing fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11.gif
[Tue Oct 18 03:08:37 2011] ../../acisf11303/products/events/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11_src.evt and ../../acisf11303/products/events/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Tue Oct 18 03:08:37 2011] Size of ../../acisf11303/products/events/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11_src.evt.gz[events] = 29 counts
[Tue Oct 18 03:08:37 2011] Mean chipx,y = (768.69, 634.97)
[Tue Oct 18 03:08:37 2011] Mean tdetx,y = (3695.97, 3317.31)
[Tue Oct 18 03:08:37 2011] chipx,y range = (750.00-794.00, 613.00-653.00)
[Tue Oct 18 03:08:37 2011] Size of ../../acisf11303/products/events/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 16 counts
[Tue Oct 18 03:08:37 2011] ../../acisf11303/products/images/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11_src.img and ../../acisf11303/products/images/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Tue Oct 18 03:08:37 2011] Not generating rmf since there are only 25 counts
[Tue Oct 18 03:08:37 2011] arf not found, will run specextract
[Tue Oct 18 03:09:03 2011] ../../acisf11303/products/spectra/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11.warf not found
[Tue Oct 18 03:09:03 2011] ../../acisf11303/products/spectra/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11.wrmf not found
[Tue Oct 18 03:09:03 2011] Removal of ../../acisf11303/products/spectra/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11.soff failed
[Tue Oct 18 03:09:09 2011] ../../acisf11303/products/lightcurves/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11_src.lc and ../../acisf11303/products/lightcurves/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Tue Oct 18 03:17:04 2011] Spectrum 11 has only 25 counts, deleting rmf
[Tue Oct 18 03:17:04 2011] 164.311
[Tue Oct 18 03:31:22 2011] Updating aperture counts using extracted products
[Tue Oct 18 03:31:22 2011] Error reading totcts from fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11_src.pi.gz
[Tue Oct 18 03:31:22 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 03:31:22 2011] Using photon index=1.80, rate=0.00127, arf fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11.arf
[Tue Oct 18 03:31:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 03:31:22 2011] Updating source flux to 1.8e-14
[Tue Oct 18 03:31:29 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 18 03:31:30 2011] acisf11303/analysis//spectral/fullrun_ccd2_acisf11303_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete